Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
Ornaments For Charity eBook - Designers Wanted! ​​​​​​​🙏 ×

DW 788 Bearings


Fish

Recommended Posts

VXB Bearings.com.

Here is a copy of an email I got from them after I replaced mine. Those are the three sizes you will need.

 

Hello Don,

We would like to thank you for purchasing from VXB Ball Bearings. Your opinions are important to us so we would like to invite you to write a review about your recent purchase. It is easy - just click the "Write a Review" link next to each product listed below and complete the quick review form.

Your Recent Purchases

HK0609 Needle Bearing 6x10x9 TLA609Z Miniature Needle Bearings

Write a review

HK0810 Needle Bearing 8x12x10 TLA810Z Miniature Needle Bearings

Write a review

HK1412 Needle Bearing 14x20x12 TLA1412Z Needle Bearings

Write a review


Your feedback will help other customers make informed buying decisions and help us improve the products we offer. Of course, the next time you visit our site, we hope you will benefit from the reviews others have contributed.

We appreciate your feedback and hope to serve you again in the near future.

Sincerely,

VXB Ball Bearings
http://www.vxb.com

 

Don R

Edited by DonR
Link to comment
Share on other sites

If you don't want to replace the bearings ,repack them with "VALVOLINE SYNTHETIC GREASE" My dw788 was wore out bad and i did that and to this day you would never know that the bearings i could pack was wore out,Only two i couldn't pack ,guess they need to be pressed out.But a year later i'm still scrolling and doing coins too! :cool:

Link to comment
Share on other sites

  • 1 year later...

VXB Bearings.com.

Here is a copy of an email I got from them after I replaced mine. Those are the three sizes you will need.

 

Hello Don,

 

We would like to thank you for purchasing from VXB Ball Bearings. Your opinions are important to us so we would like to invite you to write a review about your recent purchase. It is easy - just click the "Write a Review" link next to each product listed below and complete the quick review form.

Your Recent Purchases

HK0609 Needle Bearing 6x10x9 TLA609Z Miniature Needle Bearings

Write a review

HK0810 Needle Bearing 8x12x10 TLA810Z Miniature Needle Bearings

Write a review

HK1412 Needle Bearing 14x20x12 TLA1412Z Needle Bearings

Write a review

Your feedback will help other customers make informed buying decisions and help us improve the products we offer. Of course, the next time you visit our site, we hope you will benefit from the reviews others have contributed.

 

We appreciate your feedback and hope to serve you again in the near future.

 

Sincerely,

 

VXB Ball Bearings

http://www.vxb.com

 

Don R

DonR, info on bearings much appreciated. When you find some time, can  you post  or pm me how many of each to replace all the bearings ? wrote all numbers down but don't know how many of each I need. You know how things are discontinued after a certain number of years pass and don't want to get caught with my pants down so to speak. I really like my dewalt 788 (1) and would rather make repairs if possible. No hurry on this just like being prepare ahead when possible. Have a wonderful day.

Link to comment
Share on other sites

Not DonR but here is some information he and I posted this past January.

 

Don posted the numbers this past January.  (This post started in 2014) I also posted the number of bearings neeeded. 

Post # 4 and #5 here http://www.scrollsawvillage.com/topic/17982-dw-788/

 

I obtained the information from the 2013 version of the video.

 

https://www.youtube.com/watch?v=KjgSKrlt7LE

 

It shows the below information in the “more†section of the video introduction.

 

Bearings are sourced from VXB Bearings (800) 928-4430.
http://www.vxb.com/page/bearings/PROD...
per saw content is:
Kit8616 (HK0609 Needle Bearing 6x10x9) 12
Kit7492 (HK0810 Needle Bearing 8x12x10) 2
Kit7189 (HK1412 Needle Bearing 14x20x12) 2

Some people have found the following stills useful:   https://picasaweb.google.com/10354631...

Sleeves that go inside bearings are sourced from: http://servicenet.dewalt.com/
286294-00 short sleeve
286295-00 long sleeve
286430-00 drive link sleeve
286292-00 pivot rod

 

Larry

Edited by JustLarry
Link to comment
Share on other sites

Not DonR but here is some information he and I posted this past January.

 

Don posted the numbers this past January.  (This post started in 2014) I also posted the number of bearings neeeded. 

Post # 4 and #5 here http://www.scrollsawvillage.com/topic/17982-dw-788/

 

I obtained the information from the 2013 version of the video.

 

https://www.youtube.com/watch?v=KjgSKrlt7LE

 

It shows the below information in the “more†section of the video introduction.

 

Bearings are sourced from VXB Bearings (800) 928-4430.

http://www.vxb.com/page/bearings/PROD...

per saw content is:

Kit8616 (HK0609 Needle Bearing 6x10x9) 12

Kit7492 (HK0810 Needle Bearing 8x12x10) 2

Kit7189 (HK1412 Needle Bearing 14x20x12) 2

 

Some people have found the following stills useful:   https://picasaweb.google.com/10354631...

Sleeves that go inside bearings are sourced from: http://servicenet.dewalt.com/

286294-00 short sleeve

286295-00 long sleeve

286430-00 drive link sleeve

286292-00 pivot rod

 

Larry

Thank you Justlarry, I'll be ordering from the "per saw content" list you provide for us. I plan on ordering sleeves also so I can do a complete overhaul on my 788 dewalt (1) saw. Have a great day. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...