24 CANDY CANE ORNAMENTS

[amazingkevin]

These took 20 minutes a piece patterning ,gluing,cutting each .then there was stripping the glue ,not bad and light sanding.Done with the scroll reverse #5 blade,1/4" plywood about 6" tall  ,1/2" oak plywood   .They were cut one at a time.

[attac                           

Edited November 26, 2014 by amazingkevin

[bobscroll]

Hey Kevin, Do you have flood light's on all night!, So you can keep cutting 24/7 lol,

They look real nice Kevin, Thanks for showing, Bob         

[amazingkevin]

Sounds like a plan BOB,I like two 150 watt bulbs on the saw but the heat is too much and i tryed flouresent ,ones and broke two and to buy two more will break the bank.Good idea though.

[DWSUDEKUM]

Very nicely done Kevin.  Thanks for sharing these with us.

 

DW

[amazingkevin]

thank you for looking at my foolishness DW

[LarryEA]

Machine-Kevin. Stamp them out. Whew.

That's amazing.

[don in brooklin on]

Nicely cut.

 

I have my patterns (Candy canes for boys and angels for the girls) from Steve Good just sitting there and need to get done right after the other things on Daddy do list.

 

My plan was to stack cut 3 at a time and then do the names one at a time.  I did that with last years patterns.

Don

[amazingkevin]

Your vanacular is astounding Larry!

[amazingkevin]

I wish i could have stack cut them but 12' is to thick and i like clean crisp looking letters.Maybe someday when i get good like you ,but not now thanksDON.I would have chosen the same as you for men an woman but i'm not familar with spanish names to trust my judgements

[wombatie]

They are great Kevin,  Did you get all of the patterns from Steve Good?

 

Marg

[lawson56]

Awesome job Kevin.If I were to do that for all me Niece's & Nephew's I would need to buy 2 sheets of plywood.Again Awesome job Kevin. :thumbs:

[frankorona]

Great and wonderful work! Thanks for sharing Kevin.    

[amazingkevin]

Yes Marge i sent to Scrollsaw Workshop for the patterns!Thank you!

[amazingkevin]

Lucky you Bobby, send the list down I'll help!

[amazingkevin]

Francisco,i know your very busy with the holiday scrolling to catch up and took from your quality time to thank me so i'm thanking you too!!!!! :thumbs: :thumbs: :thumbs:

[Phantom Scroller]

Loads of lolly's Kevin the lolly is easy enough but all them names worth £5 of anybodies money or should I SAY LOLLY.  Roly

[Rob Roy]

These took 20 minutes a piece patterning ,gluing,cutting each .then there was stripping the glue ,not bad and light sanding.Done with the scroll reverse #5 blade,1/4" plywood about 6" tall  ,1/2" oak plywood   .They were cut one at a time.

011.jpg012.jpg013.jpg014.jpg015.jpg016.jpg017.jpg018.jpg019.jpg020.jpg021.jpg[attac023.jpg024.jpg025.jpg029.jpg030.jpg032.jpg033.jpg034.jpg035.jpg027.jpg028.jpg                            016.jpg

Who needs CNC when have you Kevin. Beautiful work as usual.        .

Rob Roy.

[Scrappile]

Kevin those are really nice.  I plan on getting into trying the ornament thing next year, God willing, I waited too long to  get started this year.  I will try to remember these.

[amazingkevin]

Roly these are for the landlady's employee's.She cannot be trusted with her words.my rent was supposed to be $300.00 a month,two month's later it's $500.00 Now she offered me $20.00 a piece for the ornaments but come down to it she paid me $10.00 a piece and tryed to get them for $5.00 a piece.UNBELIEVEABLE this woman .And just like the rent she says that nothing was in writeing.A real shark in sheeps clothing.But i'm still smiling she didn't take my scroll saw,lol Thank you Roly!

[amazingkevin]

Whoa,ROB ROY You just made my day.Just like JOHN HENRY and the steam hammer building the railroad John whooped  the steam hammer but died doing it!  lol but  I'm still here!

[amazingkevin]

Paul, me too This is my first year in along time doing ornaments,In 2007 i did the whole school teachers names which were alot.I 've been struggleing to keep a place to call home and when i lose my spot there goes my wood to.I can load back up quickly but time and gasoline is the problem here for me.I have a regular route for this kind of thing ,plus i's a magnet for wood !

[Around the corner]

Nice job Kevin, Im sure the word will get out and there will be more nice when their done  but when I person starts you wonder how long it will take.I made some last year but without name to give away to my favourites   welldone   Damian

[amazingkevin]

Thank you Damian

[ike]

Keven how many times did you fall asleep a t the saw?

[amazingkevin]

LOL, If i told you and showed you my bandade bills you wouldn't believe me,but for curiosity sake a few times ! It's too hard to squeeze into an out off my scrolling station to go inside for a quick cat nap.I need to start some kind of exercise as my arms are getting really heavy with all the time i spend at the saw.lol Thanks for looking my faithful on looker,lol