hippygirl Posted December 10, 2014 Report Share Posted December 10, 2014 Hi guys! Been wandering through the forums for a couple of days now, but it's time I step out of the shadows. A few years ago, I picked up a Skil SS (it was on sale and I thought it might come in handy to have one for who-knows-what). I set it up in my shop, but have used it only once to slice a few small dowels into spindles for a thread spool rack. Anyway, I figured it would work to learn on rather than spending big $$$ on a higher-end unit in case I found scrolling wasn't for me. So, here I am, a few years later and have decided to jump in and give this craft a try. Ordered a few dozen blades from Sloan's (skip tooth, various sizes above jeweler's blades). I have a LOT of scrap 3/4 stock left over from where we built our kitchen cabinets (boards and ply) and some 1/4 ply, so I should be set for enough wood to at least learn the mechanics of cutting. Anyway, just wanted to say hello. Rob Roy and amazingkevin 2 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted December 10, 2014 Report Share Posted December 10, 2014 Just watched the movie about Frankie Vallie and the Four Seasons. Sherry, Sherry baby Sherry, Sherry baby Sherry baby, .... Got a bit carried away. Welcome to SSV and that was a nice intro.. May all go well with your scroll sawing so you decide to upgrade your saw. It is an addicting hobby. Rob Roy and hippygirl 2 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted December 10, 2014 Report Share Posted December 10, 2014 Welcome to the Village Sherry!.......You will find that the village is full of kind and helpful folks! Quote Link to comment Share on other sites More sharing options...
Bendita Posted December 10, 2014 Report Share Posted December 10, 2014 Some one say Helpful? Hello Sherry welcome to the village you've successfully made the first two steps into what some people call a hobby, I call it an addiction. Step 1 Saw step 2 seek and find the nicest people in the world to help you become a star in scrolling. Plenty of free patterns and info not always free cause you have to listen to some old turkey whose been running his saw since conception, but a small price to pay. Well have fun and make lots of sawdust and remember we love pictures so share your works ( nobody has laught so far) .../Hans Quote Link to comment Share on other sites More sharing options...
Clayton717 Posted December 11, 2014 Report Share Posted December 11, 2014 hello and welcome to the village. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 11, 2014 Report Share Posted December 11, 2014 You will never regret finding the village !Help with any question is a click of the mouse away!You can go back in time years at a time in forums to see what been talked about for your knowledge in scrolling.Best thing you ever did was find us ,Thanks for joining and don't miss a day here,WELCOME! Quote Link to comment Share on other sites More sharing options...
Savannah Scroller Posted December 11, 2014 Report Share Posted December 11, 2014 Welcome -Glad ya found us. KEEP ON SCROLLING Quote Link to comment Share on other sites More sharing options...
hippygirl Posted December 11, 2014 Author Report Share Posted December 11, 2014 Thanks for the welcome! I'm quite sure I'll have a LOT of Qs, but, right now, I'm searching through the forum ISO info before I ask something that's already been asked a gazillion times...and I'm quite sure I'll fail miserably and end up asking anyway! Gotta run...German Shepherd pup is trying to eat my firewood... Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 11, 2014 Report Share Posted December 11, 2014 Hi Sherry welcome to the Village. I'm Marg from Australia. Don't worry about asking a question thats been asked a millions times before, you will still get and answer, no one cares how many times its been asked. So go ahead and ask. Marg Quote Link to comment Share on other sites More sharing options...
LarryEA Posted December 11, 2014 Report Share Posted December 11, 2014 Thanks for the welcome! I'm quite sure I'll have a LOT of Qs, but, right now, I'm searching through the forum ISO info before I ask something that's already been asked a gazillion times...and I'm quite sure I'll fail miserably and end up asking anyway! Gotta run...German Shepherd pup is trying to eat my firewood... I got comments....to your comment. Please ask questions. Some of us got interupted before we could answer it last time and we are hoping it will come up again. At the top right of each page at SSV is a SEARCH BAR, just enter a term that pretains to the page you are on. Never, never claim failure!! And ask it even if you know the answer. Here's why you ask when you know the answer... because there is more than one way to do it. What's your Shepherd's name? Make him your avitar. He's helping by making kindling. Quote Link to comment Share on other sites More sharing options...
Doug Posted December 11, 2014 Report Share Posted December 11, 2014 Intriguing name - welcome to the team. Quote Link to comment Share on other sites More sharing options...
Around the corner Posted December 11, 2014 Report Share Posted December 11, 2014 Hi welcome from a newbie. Hope you like it here as much as I do from Around the corner. Damian Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted December 12, 2014 Report Share Posted December 12, 2014 Hi Sherry a big WELCOME from me. There's a lot of Phantoms hiding in the shadows don't it feel good to come out and join in with some great people world wide who all do the same craft. Have Fun and God Bless Roly. Quote Link to comment Share on other sites More sharing options...
Multifasited Posted December 12, 2014 Report Share Posted December 12, 2014 Note of caution ,there are a lot of lurkers on the reading end as well ,you will note the vast difference between the veiwers and the responders , some I fear will never respond ,just gathering info . I'm sorry for that ,their imput could be refreshing and note worthy .But time and circumtances as well as interest level play a major part ! Welcome ,Join in as time permits and post pixs as well ,We all had our first projects ! Wilson's Woodworking 1 Quote Link to comment Share on other sites More sharing options...
ike Posted December 12, 2014 Report Share Posted December 12, 2014 Welcome from ohio Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted December 13, 2014 Report Share Posted December 13, 2014 I want to add my two cents too.. Welcome to The Village. I like to stress that logging on as often as possibly, many do one or more a day. This is the way we get to know each other> Sherry, you have stumbled into one of the best families on the planet and we all want you to feel that family tie. the most you log on and post the faster you will know you are part of this family. For us it is all about sharing our skills and see others works, posting our projects and learning from one another, we also really like to just have fun with one another. This site should be named Friendly Village. Explore everything you can find here and enjoy yourself. We are looking forward to seeing what you make too. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
hippygirl Posted December 14, 2014 Author Report Share Posted December 14, 2014 Again, THANK YOU ALL for the warm welcome! As tomorrow is Day One for me (the blades arrived, got the saw set up, built a stand...but got a LOT to do TODAY), get ready for the Qs! Quote Link to comment Share on other sites More sharing options...
John (JC) Posted December 22, 2014 Report Share Posted December 22, 2014 Welcome aboard Sherry ... Happy Scrolling and Happy Holidays from a noob in Minnesota JC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.