Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
Ornaments For Charity eBook - Designers Wanted! ​​​​​​​🙏 ×

UPDATE ON JOB #1 FINISHED


amazingkevin

Recommended Posts

i RAN OUT OF WOOD TO MAKE 150 PIECES AND ONLY DID 133,i UNDERESTIMATED AGAIN BUT $44 BUCKS IS BETTER THAN A SHARP STICK IN THE EYE,LOL.this IS THE $20 DOLLAR table saw i bought ,sweet as a kitten but missing the  plate around the blade ,dangerous!I instead of pin nailing the three pieces together i stapled them ,quick and easy ,no dragging out the compressor ,hoses fittings extension cord etc. i used 9/16" staples ,worked out good. i cut the perimeter first and then the inside'spost-1607-0-83419400-1420516611_thumb.jpgpost-1607-0-90204300-1420516631_thumb.jpgpost-1607-0-44897700-1420516647_thumb.jpgpost-1607-0-32153200-1420516690_thumb.jpgpost-1607-0-16326000-1420516733_thumb.jpgpost-1607-0-66954500-1420516747_thumb.jpgpost-1607-0-42801000-1420516761_thumb.jpgpost-1607-0-78342900-1420516788_thumb.jpgpost-1607-0-54258900-1420517040_thumb.jpg

post-1607-0-85131200-1420517136_thumb.jpg

post-1607-0-58269700-1420517159_thumb.jpg

Edited by amazingkevin
Link to comment
Share on other sites

Good job Kevin.

What do you mull over or think about when you cut?  (What comes next?) 

That's a good one LarryEA,i can't even remember what i had for breakfast,lol, I listen to  the religious radio station outside so i guess my neighbor does too,lol  I think about what they are trying to convey some sticks most goes thru one ear and on out the other .But good vibes in the background along with quality time scrolling makes me a very happy camper.I have good thoughts mostly as i'm at piece with the world scrolling.

Link to comment
Share on other sites

i RAN OUT OF WOOD TO MAKE 150 PIECES AND ONLY DID 133,i UNDERESTIMATED AGAIN BUT $44 BUCKS IS BETTER THAN A SHARP STICK IN THE EYE,LOL.this IS THE $20 DOLLAR table saw i bought ,sweet as a kitten but missing the  plate around the blade ,dangerous!I instead of pin nailing the three pieces together i stapled them ,quick and easy ,no dragging out the compressor ,hoses fittings extension cord etc. i used 9/16" staples ,worked out good. i cut the perimeter first and then the inside'sattachicon.gif003.jpgattachicon.gif004.jpgattachicon.gif005.jpgattachicon.gif006.jpgattachicon.gif007.jpgattachicon.gif009.jpgattachicon.gif010.jpgattachicon.gif011.jpgattachicon.gif013.jpgattachicon.gif012.jpgattachicon.gif007.jpg

Exemplary work as usual Kevin. Bet you're "CROSS EYED" after cutting that lot. ;)  ;)  ;)  ;)

Rob Roy.

Link to comment
Share on other sites

I wouldn't think it would be too difficult to make an insert plate for the saw. I make them for mine so I can have

zci for different set-ups. I make mine from hardwood. Of course it's easy because I had the factory insert to copy but still I think it would be fairly straight forward make one and it would greatly improve the safety of the saw and may assist in dust collection too. I know you're a busy guy but consider fabricating a proper insert.

 

Just out of curiosity do you use the saw for both ripping and cross cutting or just ripping stock?

 

Happy New Year Kevin!

Link to comment
Share on other sites

I wouldn't think it would be too difficult to make an insert plate for the saw. I make them for mine so I can have

zci for different set-ups. I make mine from hardwood. Of course it's easy because I had the factory insert to copy but still I think it would be fairly straight forward make one and it would greatly improve the safety of the saw and may assist in dust collection too. I know you're a busy guy but consider fabricating a proper insert.

 

Just out of curiosity do you use the saw for both ripping and cross cutting or just ripping stock?

 

Happy New Year Kevin!

Fist time i used the saw was for this project but i have a new 2 hp. craftsman 10"

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...