DWSUDEKUM Posted March 19, 2015 Report Share Posted March 19, 2015 I was given 3/4 of a box of 14mm thick bamboo flooring a couple of months back and this is one of the projects from just 1/2 of one of the boards. I glued together 2 pieces of 3 1/2 inch wide x 7 inches long flooring and then cut this bowl from it. The bowl is 6 inches in diameter and about 2 1/4 high. Finished with Tung Oil. DW bobscroll 1 Quote Link to comment Share on other sites More sharing options...
courdorygirl Posted March 19, 2015 Report Share Posted March 19, 2015 That's really nice! I'm determined to try a bowl one day amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted March 19, 2015 Author Report Share Posted March 19, 2015 That's really nice! I'm determined to try a bowl one day Bowls are pretty easy especially these basic ones. Just take your time laying it out, cutting sanding and finishing and you have something that folks will go you must have done that on a lathe. It is fun to watch their expressions when you tell them that no lathe was used to make the bowl, just your scroll saw, some sandpaper and elbow grease. There is a very good book out that was done by Carole Rothman - http://www.amazon.com/Wooden-Bowls-Scroll-Easy---Make/dp/1565234332/ref=sr_1_1?ie=UTF8&qid=1426793996&sr=8-1&keywords=wooden+bowls+from+the+scroll+saw Well worth owing. DW courdorygirl 1 Quote Link to comment Share on other sites More sharing options...
Gordster Posted March 19, 2015 Report Share Posted March 19, 2015 Wow DW they look spectacular.something tells me I had that book and loaned it out.time to get it back Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted March 19, 2015 Report Share Posted March 19, 2015 Very well done, DW!....nicely finished! Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 19, 2015 Report Share Posted March 19, 2015 Really a nice bowl. I was given some oak flooring a couple years ago. I've used it in many projects. Quote Link to comment Share on other sites More sharing options...
Smudger Posted March 19, 2015 Report Share Posted March 19, 2015 Very nice Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted March 20, 2015 Report Share Posted March 20, 2015 That's really nice! I'm determined to try a bowl one day You and me both Angela. I even made a compression board for stacking multi kinds of wood to be glued and compressed ! DW, i sure could use a large salad bowl that i can run a round knife pizza slicer in to chop up my salads ! Beautiful work, Now i need too find bamboo scraps! Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted March 20, 2015 Report Share Posted March 20, 2015 Nice little bowl DW, what was it like to cut bamboo flooring? I've cut some oak and birch flooring, the oak was a harder cut. Len Quote Link to comment Share on other sites More sharing options...
wombatie Posted March 20, 2015 Report Share Posted March 20, 2015 Super looking bowl DW. I saw some Bamboo ply recently and fell in love, I intend getting some when I have some spare $'s. Marg Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted March 20, 2015 Author Report Share Posted March 20, 2015 Nice little bowl DW, what was it like to cut bamboo flooring? I've cut some oak and birch flooring, the oak was a harder cut. Len Len bamboo can be tough on blades, the "hardness" varies a bit but if you think about it this is being used for flooring so its going to be pretty tough. If I had to guess for a comparison of another wood that would be marble wood. You can not rush working with bamboo. Sharp blades cut well, slightly dull blades burn it much like cherry. DW Lucky2 1 Quote Link to comment Share on other sites More sharing options...
frankorona Posted March 20, 2015 Report Share Posted March 20, 2015 Another wonderful work, looks very well done, thanks for sharing. Quote Link to comment Share on other sites More sharing options...
penquin Posted March 20, 2015 Report Share Posted March 20, 2015 They look super, very nice work. Thanks for the tips on cutting flooring, have to bet you used up a few blades doing them. Well done. jim penquin Quote Link to comment Share on other sites More sharing options...
bobscroll Posted March 20, 2015 Report Share Posted March 20, 2015 You did a great job on the bowl DW, Thanks for showing, Bob Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted March 21, 2015 Report Share Posted March 21, 2015 DW nice work as usual. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted March 21, 2015 Report Share Posted March 21, 2015 They looks Awesome! I have tried Bowls in the past,ehh ok I guess But not compared to yours. :thumbs: Quote Link to comment Share on other sites More sharing options...
Fish Posted March 22, 2015 Report Share Posted March 22, 2015 Great job, your good with those. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.