Gordster Posted June 19, 2015 Report Posted June 19, 2015 Got the little arm back today. It had a couple of globs of weld on it. I put it in the vise and ground it down with the dremmel.Got it to fit and although not exact as it was, it will get me through til I get replacement part. A fellow is making a covered wagon toy box for his granddaughter and he asked me to make a name plate for it with her name and horses on each side. Then asked for plaque with him as the builder..here is what I did... by the way he gave me the wood for it.1/4 inch ply with oak on one side and pine on the other. Great to cut, never had it before like that. Lucky2, amazingkevin, bobscroll and 1 other 4 Quote
amazingkevin Posted June 20, 2015 Report Posted June 20, 2015 Excellent job Gordie,it takes two to tango! :) :) :) :) :) oneleggimp and Gordster 2 Quote
Scrolling Steve Posted June 20, 2015 Report Posted June 20, 2015 Great work there Gordie!..Hope that weld holds till you get the replacement. Gordster 1 Quote
Scrappile Posted June 20, 2015 Report Posted June 20, 2015 Great scrolling. Glad you are up and running again. Gordster 1 Quote
LarryEA Posted June 20, 2015 Report Posted June 20, 2015 Your scroll work looks great. And glad the makeshift repair works. oneleggimp and Gordster 2 Quote
DWSUDEKUM Posted June 20, 2015 Report Posted June 20, 2015 Great work Gordie. Glad you are back up and running at least partially. DW Gordster 1 Quote
oneleggimp Posted June 20, 2015 Report Posted June 20, 2015 Got the little arm back today. It had a couple of globs of weld on it. I put it in the vise and ground it down with the dremmel.Got it to fit and although not exact as it was, it will get me through til I get replacement part. A fellow is making a covered wagon toy box for his granddaughter and he asked me to make a name plate for it with her name and horses on each side. Then asked for plaque with him as the builder..here is what I did... by the way he gave me the wood for it.1/4 inch ply with oak on one side and pine on the other. Great to cut, never had it before like that. Glad you're "back in business". Beautiful scrolling on the signs! Gordster 1 Quote
Phantom Scroller Posted June 20, 2015 Report Posted June 20, 2015 Good work Gordie like the horse adaption. Roly oneleggimp and Gordster 2 Quote
bobscroll Posted June 20, 2015 Report Posted June 20, 2015 I like the way you did them Gordie, He will be happy with them I'm sure, Thanks for showing, Bob oneleggimp 1 Quote
GrampaJim Posted June 20, 2015 Report Posted June 20, 2015 Welcome back to the saw dust world! Well done on the cutting. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.