Young_Scroller Posted June 25, 2015 Report Share Posted June 25, 2015 Hi everyone, I was wondering what kind of wood everyone uses for various things. So far I hear that 1/8 inch baltic birch is the way to go for pictures to cut. also I was wondering where the best place to get wood is. I dont want to order it over the internet, and in my town there is a few menards, home depots, lowes, 84 Lumber, ace hardware, so out of those what would have the best wood for scrolling. Thanks for all your help. -Joe Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 25, 2015 Report Share Posted June 25, 2015 (edited) Joe, I know Lowes and Home Depot do not sell Baltic Birch. I doubt is ACE does either. Do not know about Menards. Baltic Birch normally comes in 5' x 5' sheets although some have found it in 8' x 4'. In my area several lumber yard stores sell it as well as a local place that sells unfinished furniture. Shop around at those types of stores. Use your phone. I prefer 1/4" but others do prefer 1/8". It is just a matter of preference. Edited June 25, 2015 by Scrappile Quote Link to comment Share on other sites More sharing options...
Fish Posted June 25, 2015 Report Share Posted June 25, 2015 I use baltic burch for portraits. I get all mine from menards. You can go from 2x2 all the way up to a full 4x8 sheet. Price isn't bad either. I use hardwoods, oak walnut, ash, cherry hickory, whatever looks good for other projects. Boxes bowels etc. Quote Link to comment Share on other sites More sharing options...
terrylee Posted June 25, 2015 Report Share Posted June 25, 2015 I think the best place is at a saw mill,but that said: you need get a planer to get the thickness you need.You go to a Menards or or a Home Depot ,you going to pay high dollar for their wood ! I been lucky to get my hard wood for a trade in my work I do .The guy that run the sawmill, like my work I do Quote Link to comment Share on other sites More sharing options...
kywoodmaster Posted June 26, 2015 Report Share Posted June 26, 2015 (edited) If you ask 20 people you will get 20 different answers to those questions. That said, Lowes has a very good selection on thin Oak, Poplar and Pine but you are going to pay dearly for it. I agree with Terry Lee, if you have a saw mill or kiln drier that is the place to go. You can soon pay for a small planer with the savings that you will get on the lumber. Just one caution, if you buy wood right off the saw (not kiln dried) it will take about a year for it to dry to a usable level. Invest in a cheap moisture meter and learn the proper way to stack and block if you are going to buy green wood. Good luck you will get the feel as you go along. Edited June 26, 2015 by kywoodmaster Quote Link to comment Share on other sites More sharing options...
bonacker Posted June 26, 2015 Report Share Posted June 26, 2015 I find that the big box stores carry wood that is invariably warped. Same with Woodcraft stores, which carry all kinds of woodworking stuff that is always overpriced. I get most of my wood from Sloan's Woodshop online. You have to pay shipping($6.50 and up) but it's worth it for its quality. And it isn't warped or curled. Quote Link to comment Share on other sites More sharing options...
gator Posted June 26, 2015 Report Share Posted June 26, 2015 look to the biggest town around and fined a hardwood caring business. i drive to houston to get all my stuff Quote Link to comment Share on other sites More sharing options...
LarryEA Posted June 26, 2015 Report Share Posted June 26, 2015 Do a search for Baltic Birch in your area.... Quote Link to comment Share on other sites More sharing options...
Clayton717 Posted June 26, 2015 Report Share Posted June 26, 2015 I use 1/8" Baltic birch for my portraits. 1/4 BB for some other scrolling(fretwork) projects. and hardwoods in different thicknesses depending on what I'm making. You can find some decent plywoods at the big box stores. You'll just have to look for some that you think will look good. Try a few different types, thicknesses and see what works best for you and you like. I like using Baltic birch because I think it holds up(doesn't splinter out) better than most plywoods especially when cutting thin fragile areas. Quote Link to comment Share on other sites More sharing options...
Jim Finn Posted June 26, 2015 Report Share Posted June 26, 2015 Your local hobby shop will have great plywood, if that it what you need. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted June 26, 2015 Report Share Posted June 26, 2015 Casket company's throw out plenty of choice woods ,check them out.I hear you need to get on the list and take a truck load at a time when it's available .All free! :) :) :) Quote Link to comment Share on other sites More sharing options...
tennman Posted June 26, 2015 Report Share Posted June 26, 2015 Hi Micheals here in Jacksonville has the Baltic birch 12x24 sheets for 3.99 each with a coupon its less than that,made by revell,I saw it while I was in there and decided to try it and its as good as what I was paying 6.99 a sheet for at woodcrafters and a whole lot closer to me,I use it all the time for pictures and such.they had other sizes also but I already have some of that. Quote Link to comment Share on other sites More sharing options...
mgmine Posted June 26, 2015 Report Share Posted June 26, 2015 Casket company's throw out plenty of choice woods ,check them out.I hear you need to get on the list and take a truck load at a time when it's available .All free! :) :) :) Yeah but everyone is just dying to get that wood. WayneMahler, GrampaJim and bobscroll 3 Quote Link to comment Share on other sites More sharing options...
Kepy Posted June 26, 2015 Report Share Posted June 26, 2015 Any of your local lumber yards or even HD or Lowes should be able to special order Baltic Birch for you. It will come 5x5. I have ordered through the contractor's desk at HD and also a local Meeks. Quote Link to comment Share on other sites More sharing options...
edward Posted June 26, 2015 Report Share Posted June 26, 2015 I go to Micheals crafts, they have 1/8 1/4 3/8" BB, that I use all the time, as the store is only ten minutes away. edward Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted June 28, 2015 Report Share Posted June 28, 2015 Not sure where you are located but in Anaheim, Ca. there is a great company by the name of Anderson Plywood. They have plywood down to 1/64" thickness. Three plys I think. Not cheap but the quality is great. Ray Quote Link to comment Share on other sites More sharing options...
ike Posted June 28, 2015 Report Share Posted June 28, 2015 (edited) I get my ply at H D it is oak amd it comes in a 4' X 8' $28 perk sheet. That is $0.87 per inch = tax. that's not bad for any project you have..I just made 3 shelves at a price of $2.34 each shelf. that I will get at least $30.00 when I sell. Edited June 28, 2015 by ike Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted June 29, 2015 Report Share Posted June 29, 2015 I get my Baltic Birch from Rocklers. Pay a price for it thugh and I have to travel to get it. I use a lot of hardwoods of different species and pine also. I have a thickness planer so I don't worry about the original thickness. I do have access to a rgular lumber yard and get most of my hardwoods from them, a lot cheaper then the big box stores and much better quality. Most of it is rough sawn which don't bother me. I'll have to check out my Local Micheals to seeif they carry the baltic, a lot closer and from what I read here a lot cheaper. As you play around with different woods you will learn which you like and what blades and speed. I think we all went through a learning curve and all are willing to help when we can. The most important thing is to keep at it, pay attention and have fun. Quote Link to comment Share on other sites More sharing options...
oldhudson Posted June 30, 2015 Report Share Posted June 30, 2015 Casket company's throw out plenty of choice woods ,check them out.I hear you need to get on the list and take a truck load at a time when it's available .All free! :) :) :) Kevin were you saying funeral parlors or casket makers or something else? Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted June 30, 2015 Report Share Posted June 30, 2015 In the news today ... The mysterious case of the missing casket lids. Funeral parlors all over a 3 county region are missing casket lids however only the wooden ones....strange Quote Link to comment Share on other sites More sharing options...
dlgWoodWork Posted July 13, 2015 Report Share Posted July 13, 2015 One place I didn't see mentioned is local cabinet shops. Some might let you take some scraps they throw out. It never hurts to ask. Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 13, 2015 Report Share Posted July 13, 2015 that is right Dig, I get a lot of my free wood from a cabinet shop. I could fill my trailer almost daily from there if i lived close enough but unfortunately I live a couple of hundred miles from where it is located and I usually am only in the area about once every 6 weeks and then with our small car so I am only able to pick up a little at a time.. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
crupiea Posted July 30, 2015 Report Share Posted July 30, 2015 I have a local place here in San Diego that specializes in selling to cabinet makers and the like. Search around fr something like that as they will have alot of specialty type woods yu cand find elsewhere. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.