LarryEA Posted November 30, 2015 Report Share Posted November 30, 2015 (edited) I really like Gordie's pattern of "FAMILY" . Here is what I did with it. This is without a finish and I showed it to my neighbor. He liked it so much that he bought it unfinished. Here's the same one with three (3) coats of BLO. 18" x 8" x 3/8" thick Cherry with a 1/4" BB backer. I stack cut two. The second one is 18" Oak. Edited November 30, 2015 by LarryEA LarB, bobscroll, New Guy and 1 other 4 Quote Link to comment Share on other sites More sharing options...
newfie Posted November 30, 2015 Report Share Posted November 30, 2015 Beautiful work thanks for sharing LarryEA 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted November 30, 2015 Report Share Posted November 30, 2015 You did Good Larry! LarryEA 1 Quote Link to comment Share on other sites More sharing options...
terrylee Posted November 30, 2015 Report Share Posted November 30, 2015 Good job on those LarryEA 1 Quote Link to comment Share on other sites More sharing options...
Rob Posted November 30, 2015 Report Share Posted November 30, 2015 Beautifully cut and a great choice of font. I think the oak one is my favourite but they are all great. Rob LarryEA 1 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted November 30, 2015 Report Share Posted November 30, 2015 That came out absolutely fantastic. Love the finished sign. Thanks for sharing this with us. DW LarryEA 1 Quote Link to comment Share on other sites More sharing options...
dgman Posted November 30, 2015 Report Share Posted November 30, 2015 Nice cutting of a great pattern! I like them both but partial to the Cherry. LarryEA 1 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted November 30, 2015 Report Share Posted November 30, 2015 I like them all. Great finish on them. You said you stacked cut them, did that make them one inch and what size blade did you use. LarryEA 1 Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted November 30, 2015 Report Share Posted November 30, 2015 They look great! I like the oak one best. Jim LarryEA 1 Quote Link to comment Share on other sites More sharing options...
Gordster Posted November 30, 2015 Report Share Posted November 30, 2015 They came out great Larry...love the cherry one..thanks for showing... I get a lot of requests for these. LarryEA 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted November 30, 2015 Report Share Posted November 30, 2015 I really like Gordie's pattern of "FAMILY" . Here is what I did with it. Family Intersect Cherry Unfinished.jpeg This is without a finish and I showed it to my neighbor. He liked it so much that he bought it unfinished. Here's the same one with three (3) coats of BLO. 18" x 8" x 3/8" thick Cherry with a 1/4" BB backer. rsz_family_intersect_cherry.jpg I stack cut two. The second one is 18" Oak. rsz_family_intersect_oak1.jpg Very nice job ,Always precise work is what you turnout! ;) ;) :thumbs: :thumbs: LarryEA 1 Quote Link to comment Share on other sites More sharing options...
New Guy Posted November 30, 2015 Report Share Posted November 30, 2015 You sure can cut those letters. LarryEA 1 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted November 30, 2015 Author Report Share Posted November 30, 2015 I like them all. Great finish on them. You said you stacked cut them, did that make them one inch and what size blade did you use. I used a #2 .026 x .011 and the Oak is 1/4" Oak Ply... The Cherry is 3/8" Cherry board .... soooo... total thickness cut was 5/8" Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted November 30, 2015 Report Share Posted November 30, 2015 Good cut Larry nice wood. Roly LarryEA 1 Quote Link to comment Share on other sites More sharing options...
penquin Posted November 30, 2015 Report Share Posted November 30, 2015 Super looking project, well done and the wording works great. jim penquin LarryEA 1 Quote Link to comment Share on other sites More sharing options...
LarB Posted November 30, 2015 Report Share Posted November 30, 2015 Those are swell!! Great cutting LarryEA 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted December 1, 2015 Report Share Posted December 1, 2015 You did it once more. Perfectly executed.. wonderful results Dick heppnerguy LarryEA 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 1, 2015 Report Share Posted December 1, 2015 Love the cherry. Its a nice pattern to cut, isn't it? Well done Larry. Marg LarryEA 1 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted December 1, 2015 Author Report Share Posted December 1, 2015 Love the cherry. Its a nice pattern to cut, isn't it? Well done Larry. Marg Have to thank you also. Saw what you did and thought it so nice that I wanted one. So, Thank you Marg. wombatie 1 Quote Link to comment Share on other sites More sharing options...
oldhudson Posted December 1, 2015 Report Share Posted December 1, 2015 On the cherry version it looks like you routed a cove around the edge, it really helps set off the lettering. Nice work. LarryEA 1 Quote Link to comment Share on other sites More sharing options...
LarryEA Posted December 1, 2015 Author Report Share Posted December 1, 2015 (edited) On the cherry version it looks like you routed a cove around the edge, it really helps set off the lettering. Nice work. Yes I did route the edge of the Cherry one but could not do the Oak because it is a 1/4" pressboard sandwiched between thin Oak plywood. Didn't think the Oak would look ok routed. Edited December 1, 2015 by LarryEA Quote Link to comment Share on other sites More sharing options...
bobscroll Posted December 1, 2015 Report Share Posted December 1, 2015 Very Very good looking scrolling and finishing Larry! Thank you for letting us see, Bob LarryEA 1 Quote Link to comment Share on other sites More sharing options...
Docupton Posted December 1, 2015 Report Share Posted December 1, 2015 Spot on, they all look great. LarryEA 1 Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted December 1, 2015 Report Share Posted December 1, 2015 Love them all Larry........awesome scrolling........ LarryEA 1 Quote Link to comment Share on other sites More sharing options...
helmut Posted December 1, 2015 Report Share Posted December 1, 2015 I want to be able sometimes. Unfortunately, I do not understand the instructions of Travis. Because I can not speak English. to your texts to understand so halfway I use the Google translatir. helmut Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.