Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
Ornaments For Charity eBook - Designers Wanted! ​​​​​​​🙏 ×

Fixed my EX 21


trackman

Recommended Posts

Have been having trouble with the bottom blade clamp not holding the blade.  Did all the normal things but no help.  Noticed the bottom clamp assembly moving about 1/8" up and down.  The bearings on the top bolts (pencil pointing to) had worn out.  This caused a lot of "jerking" which would make the blade come out of the clamp.  Syco said the new assembly has been made stronger and shouldn't have this trouble again.  The saw runs and sounds like new again.

 

post-23356-0-59708700-1451003348_thumb.jpg

Link to comment
Share on other sites

Have been having trouble with the bottom blade clamp not holding the blade.  Did all the normal things but no help.  Noticed the bottom clamp assembly moving about 1/8" up and down.  The bearings on the top bolts (pencil pointing to) had worn out.  This caused a lot of "jerking" which would make the blade come out of the clamp.  Syco said the new assembly has been made stronger and shouldn't have this trouble again.  The saw runs and sounds like new again.

 

attachicon.gifdscn2573.jpg

It's the center boltt that wears out on my dw788's and the bolts even break in half and not fall out.That's the problem with the oriental saws i had,jerking,snatching!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...