Jump to content

Man Cave toy cars


rjR

Recommended Posts

We were using my wooden bottle openers over the holidays and my Grand-son-in-law; suggested that I make some of these.

 

They are oak, and the wheels are also.

 

The finish is a light torching then a wipe on to keep the char in place. Wheels are unfinished, but the axles are waxed to keep them turning easily!
 

Pattern is an rjR--- .

I did actually lay this out before cutting, usually do NOT on my toy cars.  I also cut  templates at the time of the original cut!

 

An addition to the comment from original== YES; these are "Bottle tested veterans".

I have made enough to cut the opener part without a real pattern!  Cut a bit small if in doubt then open wider/ deeper with a file or re-saw it!

post-2363-0-59747300-1451359008_thumb.jpg

post-2363-0-04387900-1451359028_thumb.jpg

Edited by rjR
Link to comment
Share on other sites

Very areo dynamic too! Wish i had something to open cold an chilly!

 

We were using my wooden bottle openers over the holidays and my Grand-son-in-law; suggested that I make some of these.

 

They are oak, and the wheels are also.

 

The finish is a light torching then a wipe on to keep the char in place. Wheels are unfinished, but the axles are waxed to keep them turning easily!
 

Pattern is an rjR--- .

I did actually lay this out before cutting, usually do NOT on my toy cars.  I also cut  templates at the time of the original cut!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...