New Guy Posted January 24, 2016 Report Posted January 24, 2016 When I saw the pattern I had to give it a try. 8"x10" 1/8" BBply Used spiral blades I am happy with how it turned out, but I like Kris's project better. You will get a lot of practice feeding a blade through little holes on this one. Smudger, WolfyPete, Kris Martinson and 2 others 5 Quote
Phantom Scroller Posted January 24, 2016 Report Posted January 24, 2016 Lovely framed cut. Roly Quote
Scrappile Posted January 24, 2016 Report Posted January 24, 2016 Great job on that beautiful pattern. Kris Martinson 1 Quote
Scrolling Steve Posted January 24, 2016 Report Posted January 24, 2016 That turned out really nice !...Good job ! Quote
DWSUDEKUM Posted January 24, 2016 Report Posted January 24, 2016 Very nicely done. Thanks for sharing this with us. DW Quote
penquin Posted January 24, 2016 Report Posted January 24, 2016 well done, think a bunch of folks will take a try at that one. jim penquin Kris Martinson 1 Quote
amazingkevin Posted January 24, 2016 Report Posted January 24, 2016 When I saw the pattern I had to give it a try. 8"x10" 1/8" BBply Used spiral blades I am happy with how it turned out,DSC00218.JPG but I like Kris's project better. You will get a lot of practice feeding a blade through little holes on this one. Looks great ,Threading spirals thru small pilot holes is like pulling barb wire thru socks! bobscroll and LarryEA 2 Quote
New Guy Posted January 25, 2016 Author Report Posted January 25, 2016 Looks great ,Threading spirals thru small pilot holes is like pulling barb wire thru socks! Couldn't have said it better. Quote
jerry1939 Posted January 25, 2016 Report Posted January 25, 2016 Kevin, Please tell this group about your knowledge of "Pulling barb wire thru socks). Was alcohol involved? We need to know these things. jerry Lucky2, GrampaJim and New Guy 3 Quote
Lucky2 Posted January 25, 2016 Report Posted January 25, 2016 Nicely done Al, where did you get the pattern for this cutting? Len Quote
bobscroll Posted January 25, 2016 Report Posted January 25, 2016 Nice job there Al, It looks real good to me! Bob Quote
heppnerguy Posted January 25, 2016 Report Posted January 25, 2016 Way to go.. all looks amazing.. Nicely done and displayed. One to be proud of Dick heppnerguy Quote
Gordster Posted January 25, 2016 Report Posted January 25, 2016 True beauty of a project.Hang it well, you did a great job. Quote
Scrappile Posted January 25, 2016 Report Posted January 25, 2016 Kevin, you have got to explain,"pulling barb wire through socks". I can not imagine where that came from. Quote
smitty0312 Posted January 28, 2016 Report Posted January 28, 2016 That's nice........thanks for sharing Quote
Ron Johnson Posted January 30, 2016 Report Posted January 30, 2016 Very fine cutting Al. Beautiful pattern and nicely framed. Quote
Ron Johnson Posted January 30, 2016 Report Posted January 30, 2016 Very fine cutting Al. Beautiful pattern and nicely framed. Quote
LarryEA Posted January 30, 2016 Report Posted January 30, 2016 You did a great job and by using barbed wire makes it that much better. Quote
LarryEA Posted January 30, 2016 Report Posted January 30, 2016 Very fine cutting Al. Beautiful pattern and nicely framed. In case you missed Ron's post. Quote
LarryEA Posted January 30, 2016 Report Posted January 30, 2016 Looks great ,Threading spirals thru small pilot holes is like pulling barb wire thru socks! Makes it tougher if there's no hole in the toe. Quote
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.