newfie Posted February 3, 2016 Report Share Posted February 3, 2016 Haven't been at much since the new year started few signs etc.along with the flu/cold to deal with had 4 funerals to go to not family but neighbours and friends been a hard start to the new year but starting to get back on now i hope.managed to get out in the shed the last week or so made these dart cases 1 for me and the other ones for my friends that saw mine and wanted one.little different then the normal one where you put the 3 darts in the top those.these you put 2 in the top and 1 in the bottoyes i know what you all are thinking you put it in your pocket one dart will fall out lol.but i use and heavy rubber band to put around it.pictures show the front and back there 6-1/4"L 2-1/4"W and 1"T made them from spruce seeing thats all i can get here thats a full inch thick.finished them with a few coats of mod pog. amazingkevin and Lucky2 2 Quote Link to comment Share on other sites More sharing options...
dgman Posted February 3, 2016 Report Share Posted February 3, 2016 I like those Todd, nice work! Quote Link to comment Share on other sites More sharing options...
wombatie Posted February 3, 2016 Report Share Posted February 3, 2016 My question is how did you put the pictures on them? Marg Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted February 3, 2016 Report Share Posted February 3, 2016 Very nicely done. The pictures I believe are toner transfer they might be laser or hand done with a burning pen but I think a transfer. Great work on them. Thanks for sharing them with us. DW Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted February 3, 2016 Report Share Posted February 3, 2016 Way to go Todd, they should be good sellers. I would like to see a pictures of the ends, I'm curious to see the cutting pattern. Len Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted February 3, 2016 Report Share Posted February 3, 2016 (edited) Well done Todd I've made a few of them in the past but three in a line and tapering down into a triangle shape, once you've drilled the holes then below that you can shape them and the saw cuts in the top the flights fit into so the drill holes are the length of the dart. They sell well. Roly Found a couple of Pics Todd they're about 30 years old Edited February 3, 2016 by Phantom Scroller Lucky2 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted February 3, 2016 Report Share Posted February 3, 2016 Awesome work Todd.I have to admit.I have never seen these before Not that I can recall.There cool Quote Link to comment Share on other sites More sharing options...
Gordster Posted February 3, 2016 Report Share Posted February 3, 2016 Very nice Todd,made one for a fellow just one time..I scrolled his name into it. Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted February 3, 2016 Report Share Posted February 3, 2016 Those are well done Todd!...Are the picture on those the Hog Pog part or the clear coat? Quote Link to comment Share on other sites More sharing options...
newfie Posted February 3, 2016 Author Report Share Posted February 3, 2016 Those are well done Todd!...Are the picture on those the Hog Pog part or the clear coat?the mod pog is what i used for the clear coat. Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
newfie Posted February 3, 2016 Author Report Share Posted February 3, 2016 Way to go Todd, they should be good sellers. I would like to see a pictures of the ends, I'm curious to see the cutting pattern. Len hi Len here is the pictures of the ends you was asking about. Lucky2 1 Quote Link to comment Share on other sites More sharing options...
newfie Posted February 3, 2016 Author Report Share Posted February 3, 2016 My question is how did you put the pictures on them? hi Marg what i do to put the pictures on things is your everyday house hold waxed paper in my onkjet printer.cut the waxed paper the same with as your printer paper 8.50" the length o find do really make a difference but you can cut the length to if you prefer.just get you pictures you want if there is any writing in the picture be sure you reverse it before printing it out.i find tricky to get the waxed paper in the printer right by itself so i usually take a couple sheets of ordinary printer paper and put on top of it and side in printer slot then remove the couple of sheets of paper you placed on top of the waxed paper.i dont good all rge time some do get caught in the printer.once you get it printed dont touch the ink cayse you will ruin it place it on the wood ink side down of course becareful not to repossession it or its ruined as will ans you will have to sand it of and do it again ouce you have it in place hold with firm grip and rub the picture with your finger or gr t someones help. (Thats what i do) i alst use and old credit card and go over it as will just for good measurement.peel of the waxed paper and your done.sometime they don't come out the best might have to do them a second time.and i also found themat the smoother your wood is the better.hope this helps. Marg wombatie 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted February 3, 2016 Report Share Posted February 3, 2016 First time seeing cases for darts. Excellent work Todd and nice choice for designs. Quote Link to comment Share on other sites More sharing options...
bobscroll Posted February 3, 2016 Report Share Posted February 3, 2016 Very nice job Todd! They look neat! Bob Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted February 6, 2016 Report Share Posted February 6, 2016 Haven't been at much since the new year started few signs etc.along with the flu/cold to deal with had 4 funerals to go to not family but neighbours and friends been a hard start to the new year but starting to get back on now i hope.managed to get out in the shed the last week or so made these dart cases 1 for me and the other ones for my friends that saw mine and wanted one.little different then the normal one where you put the 3 darts in the top those.these you put 2 in the top and 1 in the bottoyes i know what you all are thinking you put it in your pocket one dart will fall out lol.but i use and heavy rubber band to put around it.pictures show the front and back there 6-1/4"L 2-1/4"W and 1"T made them from spruce seeing thats all i can get here thats a full inch thick.finished them with a few coats of mod pog. Thank you todd for the learning process of copying onto something! Quote Link to comment Share on other sites More sharing options...
newfie Posted February 7, 2016 Author Report Share Posted February 7, 2016 Thank you todd for the learning process of copying onto something! Your welcome.i hope it wasn't to hard for anyone understand.I'm not the best one for trying to explain how to do things. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.