oldhudson Posted February 10, 2016 Report Share Posted February 10, 2016 (edited) I'm working on this Steve Good pattern and because I don't have nearly the experience with scroll work as many of you I wanted an opinion on the backer color. The stock is a bit over 1/4" so it's a long way to the backer color. It looks like Steve used a black or dark brown. But if you are not looking directly at the cutting it's hard to see any backer color. At first I thought red would be good but for visibility perhaps white? Anyway please give me you opinions and reasons if you care to share. Thanks for reading. I don't know what happened to the picture, it was there when I previewed? Here is a link to the plan & pic: http://scrollsawworkshop.blogspot.com/2014/01/you-hold-key-to-my-heart.html Edited February 10, 2016 by oldhudson Quote Link to comment Share on other sites More sharing options...
dgman Posted February 10, 2016 Report Share Posted February 10, 2016 Well Berry, it appears you forgot to load the picture! Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted February 10, 2016 Report Share Posted February 10, 2016 (edited) My preference Berry when doing portraits is â…›" Baltic Birch with a black background attached. I also prefer them framed. This is my liking. Everyone has their own preference for a background. Go with the one to your liking and gut feeling. You will never be wrong. Edited February 10, 2016 by Ron Johnson sullyscroller, tomsteve and Dave Monk 3 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted February 10, 2016 Report Share Posted February 10, 2016 Berry, I always use a black backer board. My reason for always using black, is that black matches up with pretty much every color there is. So, no matter where you place the object on display, it will always match the color of the room. Len Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted February 10, 2016 Report Share Posted February 10, 2016 I usually stick to basic black for most pieces ! Quote Link to comment Share on other sites More sharing options...
lawson56 Posted February 10, 2016 Report Share Posted February 10, 2016 I agree with the rest Black,unless the customer asks for a different color.On a rear occasion I will paint a flag behind my work. Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted February 10, 2016 Report Share Posted February 10, 2016 Black works 80% of the time. The other 20% you have to experiment and see what goes best. Remember everyone's taste is different. Even where you plan to hang the item as it may drive the colors. For example if one was to hang a piece on a dark paneling wall a lighter color would be better then a dark. Also consider if your piece is to be framed. If using a brown colored frame black will not likely be the best choice for your backing. Quote Link to comment Share on other sites More sharing options...
Kepy Posted February 10, 2016 Report Share Posted February 10, 2016 I have traditionally used black as a backer but have been finding that red or bright blue work also. Don't care so much for green or yellow. Quote Link to comment Share on other sites More sharing options...
oldhudson Posted February 10, 2016 Author Report Share Posted February 10, 2016 I was think I could put different colors of construction paper behind and get an idea, before I drag out a can of paint. But black certainly seems like the color of choice and I can see why now. Thanks. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 10, 2016 Report Share Posted February 10, 2016 You are doing that "you hold the key to my heart" piece? I normally use black on pictures like everyone else. However this is not a picture and I assume it is for Valentine's Day, I'd sure be tempted to see what red would like with it. Just have to throw a little mix in the discussion here. oldhudson 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 10, 2016 Report Share Posted February 10, 2016 I also prefer black for the background because it gives the most contrast to most items. However if you remember I choose red for the last box I made my wife and I think it was the better choice for this one. Like Paul said, if it is for Valentines Day, Red might be the better choice. Use your idea with the paper backer, I like that idea a lot. Good luck, and let us see the end results Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
sullyscroller Posted February 10, 2016 Report Share Posted February 10, 2016 On fretwork I use black felt 95% of the time or red felt for my valentine stuff. Glue the felt to the back with wood glue. sully Quote Link to comment Share on other sites More sharing options...
ike Posted February 10, 2016 Report Share Posted February 10, 2016 I usually use black, but if it is a pattern that you stack I may use a different color that would look good with the cutting If it is for sale I give the customer a choice. of whiche looks best to them. oldhudson 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted February 10, 2016 Report Share Posted February 10, 2016 When I did mine in 1/4" oak I did no back and Steve just had a ply back. Roly http://www.scrollsawvillage.com/gallery/image/6564-key-to-my-heart/ oldhudson 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted February 11, 2016 Report Share Posted February 11, 2016 I normally stay with black, especially for portrait work. With hearts and the like I change to red. Same applies to the piece depending on the theme. The piece you are asking about, looks to be black behind it, attach the backer board then cut the outside and sand. Replace the key and finish as you desire. Hope I understood your question. oldhudson 1 Quote Link to comment Share on other sites More sharing options...
woodduck Posted February 11, 2016 Report Share Posted February 11, 2016 I also use a black backer 80% of the time ,I find it makes it stand out much better & easier to read especially on the fine script ones.I also test by using different colours of paper,Dark blue also works well sometimes.Cheers Peter. oldhudson 1 Quote Link to comment Share on other sites More sharing options...
Sparkey Posted February 12, 2016 Report Share Posted February 12, 2016 I find that 99 percent of what I cut looks best with a black background. Quote Link to comment Share on other sites More sharing options...
oldhudson Posted February 12, 2016 Author Report Share Posted February 12, 2016 Thanks to one and all for your comments and suggestions. In the end I went to JoAnn's Fabric and found this item that I thought added some 'bling' to the project. It glued find and was easy to cut with scissors or an xacto knife. It was a couple of bucks. I posted a couple pictures of the final project under the section "bragging rights". Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted February 13, 2016 Report Share Posted February 13, 2016 I'm working on this Steve Good pattern and because I don't have nearly the experience with scroll work as many of you I wanted an opinion on the backer color. The stock is a bit over 1/4" so it's a long way to the backer color. It looks like Steve used a black or dark brown. But if you are not looking directly at the cutting it's hard to see any backer color. At first I thought red would be good but for visibility perhaps white? Anyway please give me you opinions and reasons if you care to share. Thanks for reading. I don't know what happened to the picture, it was there when I previewed? Here is a link to the plan & pic: http://scrollsawworkshop.blogspot.com/2014/01/you-hold-key-to-my-heart.html Complimentary colors work good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.