edward Posted January 13, 2010 Report Share Posted January 13, 2010 What is the proper procedure on mounting plexaglass to wood as a backer. Have never done this before, thanks for any info. Edward Quote Link to comment Share on other sites More sharing options...
Messman Posted January 13, 2010 Report Share Posted January 13, 2010 How thick is the wood you are mounting it to? Quote Link to comment Share on other sites More sharing options...
Dan Posted January 14, 2010 Report Share Posted January 14, 2010 Hey Edward, superglue should work. Of course, there are other ways depending on what you're doing. I've seen some neat fretwork with colored plexi as a backer, but I don't know how these were mounted. Quote Link to comment Share on other sites More sharing options...
Travis Posted January 14, 2010 Report Share Posted January 14, 2010 I think a two part epoxy would work well for a permanent bond. If you wanted it to be temporary, those foam two-sided stickers might work too. Quote Link to comment Share on other sites More sharing options...
scrollsaw frank Posted January 17, 2010 Report Share Posted January 17, 2010 Hi , I have used super glue , and haven't had a problem ---yet---- epoxy mabe more perminant , but i haven;t try'd it , -----------Frank--------- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.