tonylumps Posted July 23, 2016 Report Posted July 23, 2016 First Major cut on the new to me EX16. Getting the hang of top feed. amazingkevin, Old Joe, Debi Shipman and 4 others 7 Quote
Scrolling Steve Posted July 23, 2016 Report Posted July 23, 2016 Very nice work Tony !......Well done ! Quote
dgman Posted July 23, 2016 Report Posted July 23, 2016 Nice looking project Tony! I've been top feeding since I got my first DeWalt saw almost twenty years ago, and would never go back! To make it easier on the EX, you can loosen up the top arm so it does not stay up, and let gravity lower the arm to feed the blade through the fret hole. Quote
Denny Knappen Posted July 23, 2016 Report Posted July 23, 2016 Very well done, Tony. I use my EX 21 almost exclusively. Quote
tonylumps Posted July 23, 2016 Author Report Posted July 23, 2016 Nice looking project Tony! I've been top feeding since I got my first DeWalt saw almost twenty years ago, and would never go back! To make it easier on the EX, you can loosen up the top arm so it does not stay up, and let gravity lower the arm to feed the blade through the fret hole. Thanks I'll try it Quote
amazingkevin Posted July 24, 2016 Report Posted July 24, 2016 First Major cut on the new to me EX16. Getting the hang of top feed. Anthony ,if you've got this far in a year stand up and take a bow ! Exceptional cutting skills ! Old Joe 1 Quote
heppnerguy Posted July 24, 2016 Report Posted July 24, 2016 Looks I like you have everything in control. Cuts look perfect. Enjoy your new saw. When you find yourself in a comfort zone you know you can push the envelope and try something that always seemed a little scary. Nice job here Dick heppnerguy Quote
Lucky2 Posted July 24, 2016 Report Posted July 24, 2016 Tony, that's a good looking clock, it doesn't seem as if you have any issues with the new saw. Enjoy! Len Quote
Dan Posted July 24, 2016 Report Posted July 24, 2016 Nice project Tony! I'm a proponent of top feeding but know everyone has their preference. It's like the Men's Prayer from the Red Green Show.. "I'm a man, but I can change, if I have to, I guess." Quote
WayneMahler Posted July 24, 2016 Report Posted July 24, 2016 Tony Nice looking clock.I'm a top feeder and like it. Keep up the good work. Quote
Vott1 Posted July 24, 2016 Report Posted July 24, 2016 Very nice work, looks like the ex16 fits you good! Quote
LarryEA Posted July 24, 2016 Report Posted July 24, 2016 Top or bottom feed, you and your saw work well together. heppnerguy 1 Quote
woodchux Posted July 26, 2016 Report Posted July 26, 2016 Fabulous item! Thanks for sharing, continue to enjoy your EX, and be safe. Quote
NC Scroller Posted July 26, 2016 Report Posted July 26, 2016 If you do a lot of fret work top feeding and a foot switch is the only way to fly. Nice piece. Welcome to the EX club. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.