Dave Monk Posted August 12, 2016 Report Share Posted August 12, 2016 I am needing new set screws and thumb screws that clamp the blade. Where are you guys buying yours? dave Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 12, 2016 Report Share Posted August 12, 2016 Ah hah ! for which saw? I am needing new set screws and thumb screws that clamp the blade. Where are you guys buying yours? dave Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 12, 2016 Report Share Posted August 12, 2016 Have you tried ereplacementparts.com? Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted August 12, 2016 Report Share Posted August 12, 2016 For my EX21 i got them from Seyco.......looks like you have a Porter Cable , is that right?! Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted August 12, 2016 Report Share Posted August 12, 2016 (edited) Dave if you have a Dewalt the screws for the EX-21 are the same sizes. Seyco sells them as a set. Here is a link to the parts page at Seyco: http://seyco.com/partspage/ Edited August 12, 2016 by NC Scroller Quote Link to comment Share on other sites More sharing options...
ike Posted August 12, 2016 Report Share Posted August 12, 2016 I just bought one at the DeWalt repair center for $12 IKE Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted August 12, 2016 Author Report Share Posted August 12, 2016 I have a Dewalt 788. Thanks for the help. dave Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted August 12, 2016 Report Share Posted August 12, 2016 I've used eReplacementParts.com myself. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted August 12, 2016 Report Share Posted August 12, 2016 I got mine from Seyco. Ray was very helpful. Quote Link to comment Share on other sites More sharing options...
CharleyL Posted August 12, 2016 Report Share Posted August 12, 2016 (edited) Just be sure that you buy the one intended for clamping the blade. It has a flat piece in the end that swivels as it contacts the blade. There is a nearly identical looking wing bolt that is used with the DeWalt routers that does not have the flat piece in the end and will not work well as a blade grip. Pick the part number from the exploded parts view of the saw to order it and be careful if buying it from a Service Center as the counter clerk may grab the wrong one from the bins. Just make certain that it has a flat smooth end on the bolt part and you will be good. Charley Edited August 12, 2016 by CharleyL Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.