ike Posted September 28, 2016 Report Share Posted September 28, 2016 I posted a while back that I was going to try Elmer's preposition spray glue if you are going to cut it today or you don't get finished it isn't too great. The second day the pattern came up as I was cutting. Elmer's stick glue saved the day. I now have Krylon . spray glue I know it will hold.IKE Quote Link to comment Share on other sites More sharing options...
New Guy Posted September 28, 2016 Report Share Posted September 28, 2016 Same experience as Ike. Quote Link to comment Share on other sites More sharing options...
orangeman Posted September 28, 2016 Report Share Posted September 28, 2016 I buy Elmer's spray glue by the case from Blick and have had no problems. Then again I spray very lightly and use the same day. bb SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted September 28, 2016 Report Share Posted September 28, 2016 I have used 3M 45 and 77 and never had a problem . Quote Link to comment Share on other sites More sharing options...
hawkeye10 Posted September 28, 2016 Report Share Posted September 28, 2016 I think I am using Loctite now but I have used several others with no problem. I know I haven't used Elmers. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted September 28, 2016 Report Share Posted September 28, 2016 Elmer's is the only repositionable glue that that I use, I've never had an issue with it. The only glue that has given me any trouble so far is 3M77, for me, it was a nightmare to use. Len Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted September 29, 2016 Report Share Posted September 29, 2016 (edited) I use 3M 77 and never had an issue. I also apply blue painters tape under all my patterns Edited September 29, 2016 by WayneMahler Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 29, 2016 Report Share Posted September 29, 2016 I think I am using Loctite now but I have used several others with no problem. I know I haven't used Elmers. I'm staying with loctite as they have three strengths,light,med,and general performance Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 29, 2016 Report Share Posted September 29, 2016 I use 3M 77 and never had an issue. I also apply blue painters tape under all my patterns 45 & 77 are very strong i would only use these if it was on blue tape Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted September 29, 2016 Report Share Posted September 29, 2016 45 & 77 are very strong i would only use these if it was on blue tape I use blue painters tape exclusive. Quote Link to comment Share on other sites More sharing options...
stu Posted September 29, 2016 Report Share Posted September 29, 2016 Used Elmer's with painters tape for a long time pattern lifted found 77 works great but is double the price but a lot less aggravating Stu Quote Link to comment Share on other sites More sharing options...
munzieb Posted September 29, 2016 Report Share Posted September 29, 2016 I used 3m medium grade spray. If I have not properly covered the pattern, I may get some lifting when I am using regular paper. If the pattern is more complex, I will use card stock paper. Even if it lifts, it's easy to tack back down. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.