Scrolling Steve Posted October 2, 2016 Report Share Posted October 2, 2016 This is the first Mike williams pattern that i have cut,and i loved it ! ...Cut from 1/8 Baltic birch ply using 2/0 and 3/0 Flying Dutchman new spiral blades...I wanted to stack cut this but the pieces came apart early in the cut and i lost the bottom one, Oh well, I love this one...Finished with a 50/50 Blo/Ms mix...finished size is 14x15 inches......Comments welcome....Steve. jscottj, Debi Shipman, TripleJScroller and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Frank Pellow Posted October 2, 2016 Report Share Posted October 2, 2016 I like both the pattern and the work that you created using that pattern. I would appreciate it if you could point me to a spot where I can obtain the pattern (I'm willing to pay for the pattern) Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted October 2, 2016 Author Report Share Posted October 2, 2016 I like both the pattern and the work that you created using that pattern. I would appreciate it if you could point me to a spot where I can obtain the pattern (I'm willing to pay for the pattern) Frank, just google Mike williams scroll saw patterns or look at his post here when he joined the forum, he posted a link to his site. Quote Link to comment Share on other sites More sharing options...
dgman Posted October 2, 2016 Report Share Posted October 2, 2016 Wow Steve, that's a great cutting! Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Frank Pellow Posted October 2, 2016 Report Share Posted October 2, 2016 Steve, I already looked for Mike here on Scroll Saw Village and could not locate him. What is his user id here? Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted October 2, 2016 Report Share Posted October 2, 2016 That's fantastic work love it and mike does some really nice patterns. Roly http://mikesscrollsawpatterns.com/ Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted October 2, 2016 Author Report Share Posted October 2, 2016 Steve, I already looked for Mike here on Scroll Saw Village and could not locate him. What is his user id here? Frank, go to "Introductions" section of the forum and scroll down until you see Mikes scroll saw patterns, a little more than halfway down the page. Quote Link to comment Share on other sites More sharing options...
frankorona Posted October 2, 2016 Report Share Posted October 2, 2016 Awesome work!! Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
RangerJay Posted October 2, 2016 Report Share Posted October 2, 2016 Great job on a terrific pattern. Jay Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
penquin Posted October 2, 2016 Report Share Posted October 2, 2016 Great work that is outstanding. Well done. Mike does some great patterns. jim penquin Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
danny Posted October 2, 2016 Report Share Posted October 2, 2016 I JUST CHECKED OUT MIKE'S SITE AND CAN SEE RIGHT OFF THE BAT THAT HIS PATTERNS ARE DESIGNED FOR USING A ....SPIRAL BLADE.... Not for me. Never could learn to use them. CAN SEE MIKE PUTS A LOT OF WORK IN DESIGNING HIS PATTERNS............................... Steve....You did a OUTSTANDING job of cutting that pattern. Looks Real. Danny :+} Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
GPscroller Posted October 2, 2016 Report Share Posted October 2, 2016 Fantastic job on a wonderful pattern Steve :thumbs: Jeff Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted October 3, 2016 Report Share Posted October 3, 2016 Super pattern and awesome cutting. dave Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
jerry1939 Posted October 3, 2016 Report Share Posted October 3, 2016 Outstanding. Give yourself a high five. For the amount of time that some of you put into small details like this, I cannot fathom why you don't put 1 or 2 sacrifice boards with the stack. Run the grain of the sacrifice board opposite that of the piece(s) you want. Darn cheap insurance that you keep the fragile pieces sandwiched in place. Now I will try to get off of my soapbox without falling down. jerry Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 3, 2016 Report Share Posted October 3, 2016 Steve that is a masterpiece. Awesome work. I JUST CHECKED OUT MIKE'S SITE AND CAN SEE RIGHT OFF THE BAT THAT HIS PATTERNS ARE DESIGNED FOR USING A ....SPIRAL BLADE.... Not for me. Never could learn to use them. CAN SEE MIKE PUTS A LOT OF WORK IN DESIGNING HIS PATTERNS............................... Steve....You did a OUTSTANDING job of cutting that pattern. Looks Real. Danny :+} Will try one with a 2/0 flat blade, I use the Penguin Silver. Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted October 3, 2016 Report Share Posted October 3, 2016 This is the first Mike williams pattern that i have cut,and i loved it ! ...Cut from 1/8 Baltic birch ply using 2/0 and 3/0 Flying Dutchman new spiral blades...I wanted to stack cut this but the pieces came apart early in the cut and i lost the bottom one, Oh well, I love this one...Finished with a 50/50 Blo/Ms mix...finished size is 14x15 inches......Comments welcome....Steve. Steve,you've pretty much made mince meat of that piece of wood.How you kept it all together is a trade secret!!!!! Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted October 3, 2016 Report Share Posted October 3, 2016 Outstanding work on that. Reminds me of where I grew up... we had several covered bridges. Thanks for sharing this with us. DW Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted October 3, 2016 Report Share Posted October 3, 2016 Steve, you did an outstanding job on this piece, I have the pattern but haven't gotten around to cutting it yet. When I do get around to it, I hope that I can do as good a job as you have. Len Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted October 3, 2016 Report Share Posted October 3, 2016 Now that is 1 Super job!! Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
newfie Posted October 3, 2016 Report Share Posted October 3, 2016 Great pattern and beautiful job cutting it thanks for sharing Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted October 3, 2016 Author Report Share Posted October 3, 2016 Thanks for all the kind words folks !....Mike has and old mill that is on my radar to cut, we will see! Quote Link to comment Share on other sites More sharing options...
bronx Posted October 3, 2016 Report Share Posted October 3, 2016 Man that is off the charts bad ass cutting. Thumbs up my friend. Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted October 3, 2016 Report Share Posted October 3, 2016 amazing job, it's beautiful Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
Fretworker100 Posted October 3, 2016 Report Share Posted October 3, 2016 Beautiful work, I would like to try that one myself one day (soon I hope) Keep up the good work. Quote Link to comment Share on other sites More sharing options...
jamminjack Posted October 3, 2016 Report Share Posted October 3, 2016 Hit that one out of the park........... Scrolling Steve 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.