stevebuk Posted February 18, 2010 Report Share Posted February 18, 2010 hi i recently bought a couple of Harley patterns from Sue Mey , and i want to cut they out using 6mm ply. Now i usually do my cutting on 1/2 inch Oak, Iroko, spalted beech or Maple so i am not used to cutting thin stuff, what baldes do you recommend and do you advise cutting 2 pieces together. Many thanks Quote Link to comment Share on other sites More sharing options...
Travis Posted February 18, 2010 Report Share Posted February 18, 2010 My go-to blade is the Flying Dutchman #3 Scroll Reverse. You get plenty of control, while still being able to cut intricate details. Quote Link to comment Share on other sites More sharing options...
stevebuk Posted February 18, 2010 Author Report Share Posted February 18, 2010 Thanks Travis, will give it a go as i have FD blades. Quote Link to comment Share on other sites More sharing options...
Kepy Posted February 19, 2010 Report Share Posted February 19, 2010 I'm with Travis. I use the FD reverse in either #3 or #5. You will find that it is easier to cut when stacked and will give you more control. I usually try to keep my stack around 3/4" overall. Quote Link to comment Share on other sites More sharing options...
stevebuk Posted February 19, 2010 Author Report Share Posted February 19, 2010 Thanks Kepy i have taken on board what you have said and will stack them up when cutting, actually i preferred to do this as i am used to cutting thicker stuff. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.