Need Help, another Floating Eye

[hotshot]

Ok, these freaking floating eyes, man oh man.  I think this one may be harder to make look natural than that last, but thought I would get the opinions/help of our experts here.  I tried to put in a straight bridge, but it obviously looks bad.  Any pattern tweaking help would be appreciated.  (When I cut out the pattern for the cub itself, the lines on the bear are not the cut line, but are the part that will remain.  This sort of follows the other patterns I've done lately.  There are some simpler variations that don't have the floating eye issue, so I can resort to one of those if a good solution doesn't present itself. 

 

 

Edited November 7, 2016 by hotshot

[DonR]

Randy, How about this way?

[Scrolling Steve]

Don, that looks like it works !

[Birchbark]

I think this post should be moved to the Pattern request section to get a better response, but here is how i would handle it.

 

Russell

 

 

[hotshot]

Very good, you guys are Awesome!  Thanks for the help guys.  The lines are pretty thin, so I'm excited to see if it is cuttable at coin sizes.  Again, thanks

 

-------Randy

Edited November 7, 2016 by hotshot

[amazingkevin]

I think this post should be moved to the Pattern request section to get a better response, but here is how i would handle it.

 

Russell

Russell you brought out the full features of the bear your way :thumbs: :thumbs: :thumbs: :thumbs: :thumbs: