frieke Posted February 24, 2010 Report Share Posted February 24, 2010 Hello guys, After I had a bronchitis and had to stay out the shop, I feel much better and yesterday I made this one, I got the pattern from Sue Mey to try it out. This morning I've done the sanding, it's very delicate, I used birch aircraft plywood, 2mm. Next time I'll try to stack cutting, for such a fine cutting. Have a nice day! Quote Link to comment Share on other sites More sharing options...
pjl83 Posted February 24, 2010 Report Share Posted February 24, 2010 nice piece. very fine indeed! how do you sand such thin wood? is it just a case of being very careful and using thin pieces of sand paper? Thanks Paul Quote Link to comment Share on other sites More sharing options...
frieke Posted February 24, 2010 Author Report Share Posted February 24, 2010 Hello Paul, I used sand paper 180 and 220 grid. I cut pieces of it, about 2"x2", or even smaller and with much patience and carefully I did the job Quote Link to comment Share on other sites More sharing options...
grampa Posted February 24, 2010 Report Share Posted February 24, 2010 Veeeeery nice Frieke you did a great job .....Paul Quote Link to comment Share on other sites More sharing options...
BuLLdoGG Posted April 30, 2010 Report Share Posted April 30, 2010 nice work thx for sharing Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.