Replace bellows

[shoptime]

has anyone ever replaced the bellows on a Dremel 1680? Was it pretty straight forward? Thanks, Sean

[amazingkevin]

has anyone ever replaced the bellows on a Dremel 1680? Was it pretty straight forward? Thanks, Sean

you know i've taken them apart many times and i don't recall ever seeing one,Huum?

[Lucky2]

Sean, rather than replace the bellows, why don't you just get a small aquarium pump? It would do the job real well, and you wouldn't have to take your saw apart.

Len

[lawson56]

I have replaced them on a Porter Cable,Rather tight,

[crupiea]

Sean, rather than replace the bellows, why don't you just get a small aquarium pump? It would do the job real well, and you wouldn't have to take your saw apart.

Len

I use this and some aquarium tubing.  To make it pointy in the end i stuffed a piece on ink pen in the end.  taped it along side of the current tube, works great.  I saw on the slowest speed so the bellows dont blow enough off at that slow speed.  pump works great.

[shoptime]

I think I'll go the aquarium pump way. i would at least have a steady stream of air movement. Thanks, Sean