amazingkevin Posted December 10, 2016 Report Share Posted December 10, 2016 i ve noticed that pn scroll reverse blades there's 8 reverse teeth but if at all only 2 to 3 teeth ever touch the bottom of the wood?What a waste of teeth. Phantom Scroller 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted December 10, 2016 Report Share Posted December 10, 2016 No because it is a matter of what saw is being used. The travel of the blade is different on all saws. Put an auxilary table top and it changes things even more. All you need is a couple teeth to knock the fuzzies off. You are not cutting with those teeth. If you want to cut with both up and down stroke then use a combination blade. tomsteve and amazingkevin 2 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted December 10, 2016 Report Share Posted December 10, 2016 Blades are all made with different configurations. If your trying to eliminate the fuzzies on the back side of the cutting. A blade with alternating teeth may help. I use UR blades and a quick run with the ROS does the job quick and efficiently. Just my thoughts. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
ScollSaw Slasher Posted December 10, 2016 Report Share Posted December 10, 2016 Doing a fretwork clock with delicate cuts, and the Olsen Crown seems to be doing a good job. But be very aware that since it cuts in both directions, if the blade is upside down in it's placement, the cut line will pull left rather than right which we are so used to. Screwed up one section because of this. Test the blade placement on a scrap before you do your on purpose cuts. amazingkevin 1 Quote Link to comment Share on other sites More sharing options...
New Guy Posted December 10, 2016 Report Share Posted December 10, 2016 Blades are all made with different configurations. If your trying to eliminate the fuzzies on the back side of the cutting. A blade with alternating teeth may help. I use UR blades and a quick run with the ROS does the job quick and efficiently. Just my thoughts. What is a "ROS" or what does it stand for? Jim Finn 1 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted December 10, 2016 Report Share Posted December 10, 2016 ROS= Random Orbital Sander WayneMahler 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 11, 2016 Author Report Share Posted December 11, 2016 No because it is a matter of what saw is being used. The travel of the blade is different on all saws. Put an auxilary table top and it changes things even more. All you need is a couple teeth to knock the fuzzies off. You are not cutting with those teeth. If you want to cut with both up and down stroke then use a combination blade. ok great my friend now i can sleep tonight,lol Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 11, 2016 Author Report Share Posted December 11, 2016 Blades are all made with different configurations. If your trying to eliminate the fuzzies on the back side of the cutting. A blade with alternating teeth may help. I use UR blades and a quick run with the ROS does the job quick and efficiently. Just my thoughts. thank you Wayne,Guess i should read up on blades once in a while Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 11, 2016 Author Report Share Posted December 11, 2016 Doing a fretwork clock with delicate cuts, and the Olsen Crown seems to be doing a good job. But be very aware that since it cuts in both directions, if the blade is upside down in it's placement, the cut line will pull left rather than right which we are so used to. Screwed up one section because of this. Test the blade placement on a scrap before you do your on purpose cuts. i get to used to one blade for everything , change is nice though thanks Mr Slasher tomsteve 1 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted December 11, 2016 Report Share Posted December 11, 2016 2 way cut blades are pretty nice Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 12, 2016 Author Report Share Posted December 12, 2016 2 way cut blades are pretty nice i think someone sent me some ,thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.