hayu Posted March 7, 2010 Report Share Posted March 7, 2010 I was given a new Dewalt for Christmas. The blade is doing something odd and I'm not sure what you call this. My blade when I look at it seems to shimmy side to side. I found a straight edge to check it and it is just a tad off. I can't find just a tad marking on the bevel. Is there away to fix this? I am also wondering if this is why I can't make a crisp right hand corner with the saw? Quote Link to comment Share on other sites More sharing options...
Firedkm Posted March 7, 2010 Report Share Posted March 7, 2010 Is your cuts cutting at an angle instead of a straight line up and down?? Quote Link to comment Share on other sites More sharing options...
hayu Posted March 7, 2010 Author Report Share Posted March 7, 2010 Yes. It is making a very tiny tear drop motion. Quote Link to comment Share on other sites More sharing options...
Sparetime Scroller Posted March 8, 2010 Report Share Posted March 8, 2010 Rick Hutcheson has a fix for this problem on his website "www.scrollsaws.com". It's under the Dewalt Tuneup section. The thumb screw that tightens the blade pushes up against a headless allen set screw that is adjustable. A few turns one way or the other on this set screw will move the blade side to side and you should be able to line up the top and bottom fairly easily. Hope this helps. Ray F Quote Link to comment Share on other sites More sharing options...
hayu Posted March 9, 2010 Author Report Share Posted March 9, 2010 Thanks yall. I will give it a try. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.