Popular Post JohnRB Posted February 25, 2017 Popular Post Report Share Posted February 25, 2017 Hi I don't post very often, but just tend to look at other peoples work as I had a bad experience on a UK forum last time I posted some of my work. I really enjoyed doing this Jewellery Box, it was a fantastic pattern from FineScrollSaw.com. Cheers John Scrolling Steve, New Guy, lawson56 and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Birchbark Posted February 25, 2017 Report Share Posted February 25, 2017 Welcome to the forum. Very nice. Wow I like this. How many hours do you have in that? What size is that? Russell Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted February 25, 2017 Report Share Posted February 25, 2017 (edited) Very nice cutting, John !....Very intricate ! Edited February 25, 2017 by Scrolling Steve Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted February 25, 2017 Report Share Posted February 25, 2017 Beautiful! What detail. dave Quote Link to comment Share on other sites More sharing options...
David Lehner Posted February 25, 2017 Report Share Posted February 25, 2017 nice work... he has some great patterns. I have done some of his clocks Quote Link to comment Share on other sites More sharing options...
newfie Posted February 25, 2017 Report Share Posted February 25, 2017 Beautiful job John thanks for sharing Quote Link to comment Share on other sites More sharing options...
JohnRB Posted February 25, 2017 Author Report Share Posted February 25, 2017 Thank you for all your nice comments, I really enjoyed making this as I like intricate fretwork. I am just finishing a Mini Gargoyle Grandmother Clock from a pattern by Dan Wilckens, that too is quite intricate. Russell - It is 15in wide x 12.3in high x 6.8in deep, I am not sure how many hours it took as I tend to do a bit leave it a few days, then do a bit more, probably about 20 hours with the finishing. Quote Link to comment Share on other sites More sharing options...
ike Posted February 25, 2017 Report Share Posted February 25, 2017 I love it, IKE Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 25, 2017 Report Share Posted February 25, 2017 Very beautiful and I certain hope you will join in here infrequently and show more of your work. I have completed cutting the "Five Dragon Box" from Fine scrollsaw but have a lot of sanding yet to do on it. I also have the plans for several of his other boxes. The gentleman that has the site is great to do business with. Quote Link to comment Share on other sites More sharing options...
Bfreeman Posted February 25, 2017 Report Share Posted February 25, 2017 Very nice work love the different woods. Bill Quote Link to comment Share on other sites More sharing options...
JohnRB Posted February 25, 2017 Author Report Share Posted February 25, 2017 Paul - Look forward to seeing your Five Dragon Box, I was thinking of getting that pattern myself. I agree Pedro has lots of wonderful patterns, I would like to have a go at most of them, they are really good patterns. Quote Link to comment Share on other sites More sharing options...
Gordster Posted February 25, 2017 Report Share Posted February 25, 2017 One word EXCEPTIONAL...love it Welcome to the village. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 25, 2017 Report Share Posted February 25, 2017 (edited) The reason I have so much sanding to do is I use a 3/0 spiral blade to cut it. Spirals do not leave as clean of a cut as flat blades. So I need to sand all the fretwork to get rid of the little "teeth" marks. I cut it out over a year ago and I take the pieces with me when I go camping and sand...... sand.... I would just do it over but I used some very nice wood to make it and I cannot waste it. I will complete it some day if I live long enough! Here is what it looks like so far. It is not glued or anything I just put it together to fit it Edited February 26, 2017 by Scrappile Lucky2, jollyred and Gordster 3 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted February 25, 2017 Report Share Posted February 25, 2017 Excellently done John. That is a lot of work but you pulled it off beautifully. Thanks for sharing this with us, looking forward to more of your work. DW Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted February 25, 2017 Report Share Posted February 25, 2017 That is a lovely box, John very well done! Hope to see more of your work posted here. I really like Pedro's patterns. I haven't cut any recently, but have done a few in the past. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted February 25, 2017 Report Share Posted February 25, 2017 A truly beautiful box. I can see the hours spent on that project. Quote Link to comment Share on other sites More sharing options...
bobscroll Posted February 25, 2017 Report Share Posted February 25, 2017 Hello John and welcome to the forum, Your work looks really nice! Thank you for letting us see, Bob Quote Link to comment Share on other sites More sharing options...
MTCowpoke22 Posted February 25, 2017 Report Share Posted February 25, 2017 Great Job. Looks amazing. Quote Link to comment Share on other sites More sharing options...
DukeNukem Posted February 25, 2017 Report Share Posted February 25, 2017 That's beautiful I hope to see more of your work and hope you have a better experience on this site. Jerry Quote Link to comment Share on other sites More sharing options...
RangerJay Posted February 25, 2017 Report Share Posted February 25, 2017 Wow - that is stunning - congratulations on a marvelous piece of work. Jay Quote Link to comment Share on other sites More sharing options...
JohnRB Posted February 25, 2017 Author Report Share Posted February 25, 2017 Paul - I love your Five Dragon Box, that took a lot of work to get it so good. I also find that the sanding and finishing takes a lot of work, it certainly did with the jewellery box. Quote Link to comment Share on other sites More sharing options...
spirithorse Posted February 26, 2017 Report Share Posted February 26, 2017 Stunning work!Thanks for sharing and God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted February 26, 2017 Report Share Posted February 26, 2017 Hi I don't post very often, but just tend to look at other peoples work as I had a bad experience on a UK forum last time I posted some of my work. I really enjoyed doing this Jewellery Box, it was a fantastic pattern from FineScrollSaw.com. Cheers John Well now ,New blood in town! Right off the bat your wowing us to pieces with your unique projects that barely make it in the average scroll saw. Very impressive and quite the conversation piece anywhere it's displayed. Your setting new standards and achievements here quick,Thanks for joining ,Keep coming back ,Daily if possible .Somethings News always coming in the door. Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted February 26, 2017 Report Share Posted February 26, 2017 Awesome and some fantastic scrolling John. Love old patterns. Quote Link to comment Share on other sites More sharing options...
JohnRB Posted February 26, 2017 Author Report Share Posted February 26, 2017 Thank you to everyone for your nice comments it's really good to feel part of such a pleasant forum. I think I will have to move to America Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.