munzieb Posted March 19, 2017 Report Posted March 19, 2017 (edited) Thank you Don for your great pattern assist. Those thin lines were very scary. Made sure to stick the cut out pieces back in place and tape over on both sides. Used the scotch bright sanding ball with a hand drill and it worked great removing the fuzz. Stained the 1/8" plywood backer board with ebony stain. Used hand brushed contact cement on back of cutout. It worked out great and I hope my niece enjoys it. (and remembers what it says the next time she goes flying) Edited March 19, 2017 by munzieb Rob, leshko, MTCowpoke22 and 5 others 8 Quote
rjR Posted March 19, 2017 Report Posted March 19, 2017 Very well done. Now you will end up doing more of them, I think. Quote
GPscroller Posted March 19, 2017 Report Posted March 19, 2017 Great job!! Thanks for the pic. Jeff Quote
Gordster Posted March 19, 2017 Report Posted March 19, 2017 Fantastic cutting.niece should love it and will read message each time she looks at it. Quote
Scrolling Steve Posted March 19, 2017 Report Posted March 19, 2017 You and Don R. teamed up for a winner !....Well done ! Quote
DonR Posted March 19, 2017 Report Posted March 19, 2017 Well done, Bernd!! Thanks for showing us and thanks for doing a masterful job cutting my pattern. Don R Quote
Scrappile Posted March 19, 2017 Report Posted March 19, 2017 What is not to enjoy! That is a great piece and she will cherish it. Quote
DWSUDEKUM Posted March 19, 2017 Report Posted March 19, 2017 Very nicely done. Thanks for sharing this with us. DW Quote
blights69 Posted March 20, 2017 Report Posted March 20, 2017 That came out great I watched this from the request for the pattern to the change requests now to the finished piece. Worth the wait well cut and a great pattern again from Don R, Thanks for sharing Frank Quote
penquin Posted March 20, 2017 Report Posted March 20, 2017 Great work on a wonderful pattern. Thanks for the look at the finished product. jim penquin Quote
Ron Johnson Posted March 21, 2017 Report Posted March 21, 2017 Very fine cutting Bernard and nicely finished. Quote
munzieb Posted March 21, 2017 Author Report Posted March 21, 2017 Thanks all for you kind comments. Don is the "go to" guy for pattern work. Look forward to working with him again in the future. DonR 1 Quote
amazingkevin Posted March 22, 2017 Report Posted March 22, 2017 Thank you Don for your great pattern assist. Those thin lines were very scary. Made sure to stick the cut out pieces back in place and tape over on both sides. Used the scotch bright sanding ball with a hand drill and it worked great removing the fuzz. Stained the 1/8" plywood backer board with ebony stain. Used hand brushed contact cement on back of cutout. It worked out great and I hope my niece enjoys it. (and remembers what it says the next time she goes flying) Well done sir,i've spent many hours in a 152. Quote
munzieb Posted June 30, 2017 Author Report Posted June 30, 2017 My niece came and visited a few weeks ago and she was very impressed with the great pattern. Thanks again Don for your excellent design work. DonR 1 Quote
jerry1939 Posted June 30, 2017 Report Posted June 30, 2017 (edited) I learned to fly in that model. You did a great job Sir !! jerry Edited June 30, 2017 by jerry1939 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.