Rockytime Posted March 22, 2021 Report Share Posted March 22, 2021 I made my own clamps as the Hegner, even the quick clamps, are crap. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 22, 2021 Report Share Posted March 22, 2021 13 minutes ago, Rockytime said: I made my own clamps as the Hegner, even the quick clamps, are crap. What make you say this, I mean in like why do you think they are crap? I have used them for several years with no problems... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Ronny80 Posted March 22, 2021 Report Share Posted March 22, 2021 14 minutes ago, Rockytime said: Ho fatto i miei morsetti perché gli Hegner, anche i morsetti rapidi, sono una schifezza. The type of clamps can influence the length of the blade and the distance OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted March 22, 2021 Report Share Posted March 22, 2021 Just now, Scrappile said: What make you say this, I mean in like why do you think they are crap? I have used them for several years with no problems... They work and I've used them for some time but it takes, If I remember correctly, the left thumb and forefinger to hold the blade in place while you tighten the knob. I find it easier to just put the blade in a little hole and tighten the knob. It does not take the two finger approach. I had posted a photo but I think you said you didn't know what it was. I can post again if you wish. Scrappile and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted March 22, 2021 Report Share Posted March 22, 2021 4 minutes ago, Ronny80 said: The type of clamps can influence the length of the blade and the distance You asked. I can only tell you what mine is. There can't be an appreciate difference. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 22, 2021 Report Share Posted March 22, 2021 1 minute ago, Rockytime said: They work and I've used them for some time but it takes, If I remember correctly, the left thumb and forefinger to hold the blade in place while you tighten the knob. I find it easier to just put the blade in a little hole and tighten the knob. It does not take the two finger approach. I had posted a photo but I think you said you didn't know what it was. I can post again if you wish. Got it, thank,, I think I remember you post now.... I have no problem with the stock ones. Ronny80, Rockytime and OCtoolguy 2 1 Quote Link to comment Share on other sites More sharing options...
Ronny80 Posted March 22, 2021 Report Share Posted March 22, 2021 1 minute ago, Scrappile said: Capito, grazie, penso di ricordare il tuo post ora .... Non ho problemi con quelli di serie. What is the distance between the top plate and the clamp, with blade in tension and the top arm on down position on your Hegner? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted March 22, 2021 Report Share Posted March 22, 2021 Arm down and tension on from my table top to bottom of clamp I measure 6.7. But that could be different for each machine depending on how much tension a person uses, type of blade, etc. Maybe that is not what you are asking.. Ronny80 and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted March 22, 2021 Report Share Posted March 22, 2021 I think this has run it's course or should go to a new posting. You are measuring 6.7cm and mine is 6.533cm. Arm up is 8.291cm. It is difficult to measure precisely. Those few thousandths will make no appreciable difference one way or the other. I'd rather just sit back and scroll. While trying to measure my eyeballs may not see correctly. OCtoolguy and Ronny80 1 1 Quote Link to comment Share on other sites More sharing options...
rash_powder Posted March 22, 2021 Report Share Posted March 22, 2021 The Bearings I speak of are the bearings/bushings in the pivots of the arms. They are very similar to plain bearings or con-rod bearings in a car. That moly 60 paste is thicker than peanut butter; I cleaned them up as best I could and put just enough on them to see that the color changed - kinda streaky black. I haven't had to service them since, but I don't use my saw nearly as much as you guys do. I can tell you that this stuff is literally the only stuff to lube the final drive of a shaft drive motorcycle with. Any other grease lets that wear out; that final drive hub and parts are HUGE $$$. Its prob overkill for our application, but I feel its the best option for the bearings. I would pack a ball or roller bearing with the stuff if I felt that it was an application that warranted it. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 22, 2021 Report Share Posted March 22, 2021 15 minutes ago, rash_powder said: The Bearings I speak of are the bearings/bushings in the pivots of the arms. They are very similar to plain bearings or con-rod bearings in a car. That moly 60 paste is thicker than peanut butter; I cleaned them up as best I could and put just enough on them to see that the color changed - kinda streaky black. I haven't had to service them since, but I don't use my saw nearly as much as you guys do. I can tell you that this stuff is literally the only stuff to lube the final drive of a shaft drive motorcycle with. Any other grease lets that wear out; that final drive hub and parts are HUGE $$$. Its prob overkill for our application, but I feel its the best option for the bearings. I would pack a ball or roller bearing with the stuff if I felt that it was an application that warranted it. I think it's overkill and actually may not be the right thing to do. The factory calls for just a few drop of oil occasionally. Depending on usage. Quote Link to comment Share on other sites More sharing options...
Ronny80 Posted March 22, 2021 Report Share Posted March 22, 2021 54 minutes ago, Scrappile said: Braccio verso il basso e tensione dal piano del tavolo alla parte inferiore del morsetto che misuro 6,7. Ma potrebbe essere diverso per ogni macchina a seconda di quanta tensione usa una persona, tipo di lama, ecc. Forse non è quello che stai chiedendo .. With quick Clamp or normal clamp? Thanks OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Ronny80 Posted March 22, 2021 Report Share Posted March 22, 2021 39 minutes ago, Rockytime said: Penso che questo sia finito o dovrebbe andare a un nuovo intervento. Stai misurando 6,7 cm e il mio è 6,533 cm. Il braccio in alto è di 8,291 cm. È difficile misurare con precisione. Quei pochi millesimi non faranno alcuna differenza apprezzabile in un modo o nell'altro. Preferisco semplicemente sedermi e scorrere. Durante il tentativo di misurare i miei bulbi oculari potrebbe non vedere correttamente. Thank you OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Ronny80 Posted March 23, 2021 Report Share Posted March 23, 2021 On 22/3/2021 at 02:51, Rockytime said: Penso che questo sia finito o dovrebbe andare a un nuovo intervento. Stai misurando 6,7 cm e il mio è 6,533 cm. Il braccio in alto è di 8,291 cm. È difficile misurare con precisione. Quei pochi millesimi non faranno alcuna differenza apprezzabile in un modo o nell'altro. Preferisco semplicemente sedermi e scorrere. Durante il tentativo di misurare i miei bulbi oculari potrebbe non vedere correttamente. Just now I see your photo, I in your photo read 64mm (6,4Cm). Not 6,533. Thanks OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.