1213brett Posted June 23, 2017 Report Share Posted June 23, 2017 (edited) I want to scroll the project bellow. What would be the easiest wood to use. The widths of the wood used are 3/4" 1/2" 1/4" 1/8" 3/8" 3/16" I plan to paint the wood with acrylic and then spray it with clear polyurethane. Edited June 23, 2017 by 1213brett SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
SCROLLSAW703 Posted June 23, 2017 Report Share Posted June 23, 2017 well brett, bein' you're going to paint it, I would suggest poplar. It's easy work with on the saw, sands easy, medium density wood, & takes paint better than hardwood. And clear of knots, where pine isn't. And it's fairly cheap, unless ya live here in NW Kansas. Then its more costly than oak, cherry, maple, or walnut. 1213brett and lawson56 2 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted June 23, 2017 Report Share Posted June 23, 2017 I agree.I have used poplar in the past,found no knots,sands very easy,paint takes to it like a charm.The thinner wood BB ply unless you have a plainer. SCROLLSAW703, 1213brett and danny 3 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted June 23, 2017 Report Share Posted June 23, 2017 I agree. the thicker (3/4, 1/2, 3/8) wood should be solid Poplar and the thin stock (1/4, 1/8,3/16) should be Baltic Birch Plywood. SCROLLSAW703 and 1213brett 2 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted June 23, 2017 Report Share Posted June 23, 2017 I would also use Poplar with BB for the thin stuff ! 1213brett and SCROLLSAW703 2 Quote Link to comment Share on other sites More sharing options...
Dan Posted June 23, 2017 Report Share Posted June 23, 2017 Poplar seems to be the popular choice. I would also use poplar. SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
hawkeye10 Posted June 23, 2017 Report Share Posted June 23, 2017 46 minutes ago, Dan said: Poplar seems to be the popular choice. I would also use poplar. This is a Popular post. SCROLLSAW703 and WayneMahler 2 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 23, 2017 Report Share Posted June 23, 2017 Well there you go! I think popular has the vote, and I agree. SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
tuner Posted June 23, 2017 Report Share Posted June 23, 2017 Well I guess you know what wood is recommended, looks like a nice project post some pics when your done. SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
1213brett Posted June 23, 2017 Author Report Share Posted June 23, 2017 Thank you for all your suggestions guys! SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted June 24, 2017 Report Share Posted June 24, 2017 Brett, I would use pine or poplar, either one would do a good job. For anything 1/8", I would probably use baltic birch plywood unless the plywood edge is to noticeable. Len Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted June 24, 2017 Report Share Posted June 24, 2017 wow almost a 100 % agreement. that does not happen very often.. I guess there is no doubt as to which wood you will be using for this project. I too am anxious to see the finished piece. Good luck with it Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
bandaideman Posted June 24, 2017 Report Share Posted June 24, 2017 I was looking for oak in larger size 12 inch wide but short. Needed to buy 8-12 foot. Little high for what I was doing. and looked at poplar then found pine made in New Zealand. Not sure what it means but was right size and price at Menards so I got a smallest length used it as a backer and stained with golden oak after sanding sealer applied and sanded. Looked good and customer thrilled which is the bottom line. May work as well for painting Not sure first time using. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.