cowboy Posted July 24, 2017 Report Share Posted July 24, 2017 Hi all just wondering if anyone as a manual for this scroll saw record power 20" scroll saw manual or if anyone knows of a good site, here is a photo of my saw Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted July 24, 2017 Report Share Posted July 24, 2017 You can go to the RBI Hawk web site and download your manual.. Hawk built these for Record Power.. Yours looks to be the same machine as the 220 Without seeing the other side where the power switch is I don't know if you have the 220VS or the 220-3.. Not sure how Hawk handled the serial numbers for the other model names they used.. http://www.rbiwoodtools.com/WebsitePages/Scroll-Saw-Manuals.html Hope this helps cowboy 1 Quote Link to comment Share on other sites More sharing options...
Rolf Posted July 24, 2017 Report Share Posted July 24, 2017 What vintage? I would go to the Hawk web site I am sure they manuals are the same . http://www.hawkwoodworkingtools.com/files/SawManuals/model_220_serial_2100-6300.pdf this may be close cowboy 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 26, 2017 Report Share Posted July 26, 2017 On 7/24/2017 at 1:06 PM, cowboy said: Hi all just wondering if anyone as a manual for this scroll saw record power 20" scroll saw manual or if anyone knows of a good site, here is a photo of my saw The best machine i ever has(2) of them is the delta c-arm scroll saw huge needle bearings like a pencil eraser .I added a zerk grease fitting and Pumped them full of new grease .Who would have thought the circuit board would go before the bearings But i have on left as a back up for my 10 dewalts I'm afraid of machines like yours with a linking arm in the back.All chinese saws are like that and i wore out a dozen of them,just my 2 cents! Quote Link to comment Share on other sites More sharing options...
cowboy Posted July 26, 2017 Author Report Share Posted July 26, 2017 Hi all the good news is l have found out what the problem is / was and l might be getting it fixed thank you allfor you comments Quote Link to comment Share on other sites More sharing options...
hotshot Posted July 26, 2017 Report Share Posted July 26, 2017 (edited) 17 hours ago, amazingkevin said: .....i wore out a dozen of them,just my 2 cents! Kevin, I don't think you can judge this type of saw based on any cheap Chinese saws. There is much less to go wrong on this type of saw than on your 788s. We might have to look for you a good used craigslist Hegner and see if you can wear one of those out. Edited July 26, 2017 by hotshot kmmcrafts and Rolf 2 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 27, 2017 Report Share Posted July 27, 2017 7 hours ago, hotshot said: Kevin, I don't think you can judge this type of saw based on any cheap Chinese saws. There is much less to go wrong on this type of saw than on your 788s. We might have to look for you a good used craigslist Hegner and see if you can wear one of those out. I'll try anything ,thanks! Quote Link to comment Share on other sites More sharing options...
cowboy Posted July 27, 2017 Author Report Share Posted July 27, 2017 6 hours ago, amazingkevin said: I'll try anything ,thanks! Dont think its cheap Chinese saw Look at the address at the bottom Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.