Pancho Posted September 1, 2017 Report Share Posted September 1, 2017 Thinking of using pallet wood for small children puzzles and animal figures. Anyone have a suggestion on a good metal detector that wont break the bank? Been looking at the ones on Amazon.com and Rockler.com. Thanks for any information. scrollin'fool 1 Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted September 1, 2017 Report Share Posted September 1, 2017 If you checked out the ones on Amazon and Rockler, then you've pretty much have seen them all. Len Quote Link to comment Share on other sites More sharing options...
tuner Posted September 1, 2017 Report Share Posted September 1, 2017 Maybe a used one off eBay ? Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted September 1, 2017 Report Share Posted September 1, 2017 Seems you get what you pay for as with anything else. Do the homework, may spend a little more but save in the long run. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 1, 2017 Report Share Posted September 1, 2017 I need one myself,changing planer blades is not fun Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 1, 2017 Report Share Posted September 1, 2017 I think I've even seen them as apps on your phone now as well. https://walabot.com/diy Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted September 1, 2017 Report Share Posted September 1, 2017 I use one from Harbor Freight. Quote Link to comment Share on other sites More sharing options...
munzieb Posted September 1, 2017 Report Share Posted September 1, 2017 Bought one from Harbor Freight. A little over $40. Not top of the line but works OK. https://www.harborfreight.com/catalogsearch/result/index/?dir=asc&order=EAScore%2Cf%2CEAFeatured+Weight%2Cf%2CSale+Rank%2Cf&q=metal+dector Quote Link to comment Share on other sites More sharing options...
scrollin'fool Posted September 1, 2017 Report Share Posted September 1, 2017 I just wanted to say congratultions and thank you for choosing to use more recycled wood instead of new good luck with the metal detector WayneMahler, Birchbark and heppnerguy 3 Quote Link to comment Share on other sites More sharing options...
cnkcustoms02 Posted September 2, 2017 Report Share Posted September 2, 2017 As I am a huge proponent of recycling wood I personally would steer clear of pallet wood for children's toys puzzles or anything they could possibly put in their mouths as palletscan be very toxic because you never know what has been on them. Just a point to think on spirithorse, WayneMahler and heppnerguy 2 1 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted September 2, 2017 Report Share Posted September 2, 2017 I agree about not using pallet wood for children's puzzles or anything for children. You just do not know what was on the pallet or how it was treated or with what. People are so careful with wood types and finishes for children's toys and pallet wood is not worth the risk. I would not buy anything pallet wood for my grandkids. Pallet wood is fine for some things but not children's things. Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted September 3, 2017 Report Share Posted September 3, 2017 I don't think I would have thought about the different things that are placed on pallets and that they can be harmful. especially to others. Great point Dick heppnerguy WayneMahler 1 Quote Link to comment Share on other sites More sharing options...
Birchbark Posted September 3, 2017 Report Share Posted September 3, 2017 lmao, why? what toxic waste dump are you getting these from? Hey, kids, don't lick that pallet? what sanitary mill are you getting your puzzle material from normally? I'm sure Home Depot comes by and squirts sanitizer on each board every morning. What are you talking about? Geez give me a break here. Are you serious? I think before that tree was harvested, there was a dog,... oh my, don't put that in your mouth, you don't know where it's been. really? Russell JOE_M 1 Quote Link to comment Share on other sites More sharing options...
scrollin'fool Posted September 3, 2017 Report Share Posted September 3, 2017 yeah my dog would eat that Quote Link to comment Share on other sites More sharing options...
zimmerstutzen Posted September 3, 2017 Report Share Posted September 3, 2017 I live on the edge of the rust belt with lots of factories etc nearby. Pallets with paints, oils and agricultural chemicals soaked in are not unusual. While most have merely been exposed to weather, I have seen them sitting in water getting moldy, or covered with bird and rodent crap. (And I still drink out of the barn hose, but only after the water's been flowing a while.) Besides which, you may not know if the pallet wood is spaulted maple that has it's own health concerns. I started making gifts for my grandkids.. I am using clean processed wood from a store or cut offs from a furniture factory. (Made a small rolling pin for a granddaughter from a piece of kiln dried sugar maple that was intended for a husky office chair leg. ) I keep a special box for woods that I am comfortable using for kids stuff. Most of it is kiln dried and not something that was used as part of another product. For instance the maple cut offs from the furniture factory. a 2 x 2 piece of sugar maple was just right to turn a little rolling pin for a three year old. Year ago, a fellow appeared at a craft show in Annapolis MD and was selling hand carved pipes. He was out collecting his own "briar" meaning multiflora rose stumps and other materials. The rumor around town was that the fellow made a pipe from a hefty root he harvested, which just happened to be poison ivy. You really need to know what you are using. Some woods suitable for pallets crack and splinter easily. Something you would not want for a child's item. If you were just cutting a rustic Christmas door decoration, no one would care. . heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
cnkcustoms02 Posted September 3, 2017 Report Share Posted September 3, 2017 Wow. Just wow. It appears you have no real clue about where pallets get used and reused from heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.