Kerrie88 Posted October 16, 2017 Report Share Posted October 16, 2017 Hi, ok sorry if this question has been asked heaps of times, but... as the title says I'm a complete beginner!! im wanting to buy my first scroll saw to do name plaques with script names. Q 1: um So do I need to attach a vaccum to the machine for dust collection? Q 2: how does the dust blower work without a vaccum? Q3: I'm looking at a jet 16" saw, struggling to find any reviews on this model. If anyone has had/used one could you please give me your review? Q 4: I'm open to spending up to around $400, If anyone could suggest a really good quick change blade machine, that doesn't vibrate too much? Thank you all I'm advance looking forward to starting. Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted October 16, 2017 Report Share Posted October 16, 2017 I actually had to look up that saw. Never noticed it before. I did see hat it has dust collection. I would check reviews. Maybe someone here can give you some better information. Before I got my EX 21, I had a Dewalt. It was a great saw. Kerrie88 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 16, 2017 Report Share Posted October 16, 2017 Hi, welcome to the Village. Looks like you are in Australia, so your choices of saws is a little more limited than in the U.S. I also had to look up the saw you mention, so I am no help on info about the saw. There are some members he that are in Australia, hopefully they can chime in about saws available in your area. Truthfully, you usually do not have to hook up a vac to your saw. The blower will (should ) blow the dust off your pattern so you can see what you are sawing. It is usually operated by a billows that is pumped by the action of your saw arm. But, as a wise old man I highly recommend the best method of dust collection you can come up with. There are lots of methods, some simple, some more elaborate. Just search the forum for "dust collecton". The fine dust generated while scrolling is not good to breath. Looking at the picture you posted if you are going to do work of that size, I would recommend a 20+ inch scroll saw. SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted October 16, 2017 Report Share Posted October 16, 2017 Hi and welcome to the village. I'm not familiar with the Jet line of saws but a google search may help in finding a review. As Paul said, the dust blower should keep the cut lines free so you can see them while you work. Dewalts have a good reputation for the most part but not sure they are available in your area. Some have set up a box fan with a furnace filter on it so the air passes through the filter as the fan runs. Be careful with the very fine dust, not good to breath it in and from what I understand once in never out. So a good face filter will help with that. Being new remember to enjoy the time spent at your saw and never be afraid to ask questions. Kerrie88, OCtoolguy and SCROLLSAW703 2 1 Quote Link to comment Share on other sites More sharing options...
woodduck Posted October 17, 2017 Report Share Posted October 17, 2017 (edited) Hi Kerrie I am Peter from N.S.W I am afraid I know next to nothing about the Jet .The saw I started out with was a carbatec 18" variable speed but this may be above your budget as they are in the $750 dollar range. I used this saw for a couple of years & was very happy with it,I have since upgraded to the EX 21. Of course the dearer machines are a lot better & worth the extra you spend on them. It just depends on how & what you are going to use it for. Cheers Peter. Edited October 17, 2017 by woodduck OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
banderson Posted October 17, 2017 Report Share Posted October 17, 2017 On 10/16/2017 at 8:50 AM, Scrappile said: Looking at the picture you posted if you are going to do work of that size, I would recommend a 20+ inch scroll saw. I would agree. The capacity needs to be one of the major points in looking at scroll saws. I have been close several times with maxing out the capacity of my DeWalt. I know the alternative is the spiral blades, I am just not that comfortable with them. OCtoolguy and Kerrie88 1 1 Quote Link to comment Share on other sites More sharing options...
Kerrie88 Posted October 17, 2017 Author Report Share Posted October 17, 2017 On 17/10/2017 at 2:50 AM, Scrappile said: Hi, welcome to the Village. Looks like you are in Australia, so your choices of saws is a little more limited than in the U.S. I also had to look up the saw you mention, so I am no help on info about the saw. There are some members he that are in Australia, hopefully they can chime in about saws available in your area. Truthfully, you usually do not have to hook up a vac to your saw. The blower will (should ) blow the dust off your pattern so you can see what you are sawing. It is usually operated by a billows that is pumped by the action of your saw arm. But, as a wise old man I highly recommend the best method of dust collection you can come up with. There are lots of methods, some simple, some more elaborate. Just search the forum for "dust collecton". The fine dust generated while scrolling is not good to breath. Looking at the picture you posted if you are going to do work of that size, I would recommend a 20+ inch scroll saw. Thank you for your reply. Yes we are very limited here in Australia. oh well I was looking at a smaller one so maybe I will get a bigger one as wouldn't want to spend the money and not be able to do the projects I want. Quote Link to comment Share on other sites More sharing options...
Kerrie88 Posted October 17, 2017 Author Report Share Posted October 17, 2017 11 hours ago, woodduck said: Hi Kerrie I am Peter from N.S.W I am afraid I know next to nothing about the Jet .The saw I started out with was a carbatec 18" variable speed but this may be above your budget as they are in the $750 dollar range. I used this saw for a couple of years & was very happy with it,I have since upgraded to the EX 21. Of course the dearer machines are a lot better & worth the extra you spend on them. It just depends on how & what you are going to use it for. Cheers Peter. Hi Peter, thanks for replying. I have seen the carbatec 18". Was wondering if it's worth spending the money on it as finding quite hard to find a saw. I either find a cheap ryobi for $129 from bunnings ( which I have been contemplating) or the next price range is the carbatec one. Can I ask where you purchase your saws from? And a good brand of blades available in Australia? I had no idea the scroll saw market was so little here :/. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted October 17, 2017 Report Share Posted October 17, 2017 Welcome to the forum from TN. Looks like you got some good information. My first saw as and still is a DeWalt 788 20". I now have an EX21 which is my go to saw. Kerrie88 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 17, 2017 Report Share Posted October 17, 2017 11 hours ago, woodduck said: Hi Kerrie I am Peter from N.S.W I am afraid I know next to nothing about the Jet .The saw I started out with was a carbatec 18" variable speed but this may be above your budget as they are in the $750 dollar range. I used this saw for a couple of years & was very happy with it,I have since upgraded to the EX 21. Of course the dearer machines are a lot better & worth the extra you spend on them. It just depends on how & what you are going to use it for. Cheers Peter. Isn't the Cardatec the over seas version of the Excalibur? Should be a pretty good saw. Quote Link to comment Share on other sites More sharing options...
Kerrie88 Posted October 17, 2017 Author Report Share Posted October 17, 2017 8 minutes ago, Denny Knappen said: Welcome to the forum from TN. Looks like you got some good information. My first saw as and still is a DeWalt 788 20". I now have an EX21 which is my go to saw. Thank you. I watched a few videos on the dewalt and was sold but it's impossible to get in Australia and I'd be paying 200+ for shipping from America. Quote Link to comment Share on other sites More sharing options...
woodduck Posted October 18, 2017 Report Share Posted October 18, 2017 5 hours ago, Kerrie88 said: Hi Peter, thanks for replying. I have seen the carbatec 18". Was wondering if it's worth spending the money on it as finding quite hard to find a saw. I either find a cheap ryobi for $129 from bunnings ( which I have been contemplating) or the next price range is the carbatec one. Can I ask where you purchase your saws from? And a good brand of blades available in Australia? I had no idea the scroll saw market was so little here :/. Kerrie I purchased my first saw from the Carbatec stand at the Sydney working with wood show & the second via a phone call straight to Carbatec Phone No 1800658111 . E -Mail info@carbatec.com.au I buy my blades from Helen Harris from Murray Bridge E-Mail ochjh@scrolling.com.au or Phone at 0885313440. She has a leaflet with all the blades you will ever need & delivers fast & efficient service. Quote Link to comment Share on other sites More sharing options...
Kerrie88 Posted October 18, 2017 Author Report Share Posted October 18, 2017 7 minutes ago, woodduck said: Kerrie I purchased my first saw from the Carbatec stand at the Sydney working with wood show & the second via a phone call straight to Carbatec Phone No 1800658111 . E -Mail info@carbatec.com.au I buy my blades from Helen Harris from Murray Bridge E-Mail ochjh@scrolling.com.au or Phone at 0885313440. She has a leaflet with all the blades you will ever need & delivers fast & efficient service. Oh thank you for for all the help. Cant wait to start scrolling Quote Link to comment Share on other sites More sharing options...
Sparkey Posted October 19, 2017 Report Share Posted October 19, 2017 Welcome to the Village Kerrie. Looking forward to seeing some of your work. Quote Link to comment Share on other sites More sharing options...
JOE_M Posted October 19, 2017 Report Share Posted October 19, 2017 You might find these guys to be helpful when it comes to finding machines/blades in Australia. http://www.scrollsawaustralia.com/ Most of the links on their link page seem to be dead, but their main page advertises an event from May, so if they've disbanded it's just been recently. There are also these people. Their site too is a bit outdated, but they have a newsletter from last month so they're not dead yet: http://www.woodgroupsa.org.au/sozscroll/ With a bit of luck you might be able to find someone there who has set themselves up as an importer/reseller of tools/blades. Quote Link to comment Share on other sites More sharing options...
SCROLLSAW703 Posted October 20, 2017 Report Share Posted October 20, 2017 howdy! And welcome to the forum! It's great to see a newbie on the forum! There is a wealth of information here from all skill levels of scrollers. You won't find a friendlier, more helpful bunch than right here! Personally, I run Hawk & Hitachi Saws, & have had no complaints on either brand. I wore out one Hawk. I've got a BM 26 now. It's an awesome machine, but has its down falls as well. My Hitachi is over 20 years old, & runs like new. Look for a saw that is going to fit your needs. Don't underestimate the use or purpose of it. Study reviews about the saw you're lookin' at. Also check into blade availability. I would encourage you try different brands & find what works for you. Good luck! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted October 22, 2017 Report Share Posted October 22, 2017 On 10/16/2017 at 5:14 AM, Kerrie88 said: Hi, ok sorry if this question has been asked heaps of times, but... as the title says I'm a complete beginner!! im wanting to buy my first scroll saw to do name plaques with script names. Q 1: um So do I need to attach a vaccum to the machine for dust collection? Q 2: how does the dust blower work without a vaccum? Q3: I'm looking at a jet 16" saw, struggling to find any reviews on this model. If anyone has had/used one could you please give me your review? Q 4: I'm open to spending up to around $400, If anyone could suggest a really good quick change blade machine, that doesn't vibrate too much? Thank you all I'm advance looking forward to starting. Welcome friend ,You'll get all the answers you'll need right here. SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted October 22, 2017 Report Share Posted October 22, 2017 Welcome to the Village, Kerri ! SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.