Retired Scroller Posted October 18, 2017 Report Share Posted October 18, 2017 I typically use sanding files, belt sander and oscillating drum sander for my work. What other methods/tools are used for smaller projects? Is a flap sander an option for this smaller work?thanks for the input. Quote Link to comment Share on other sites More sharing options...
Denny Knappen Posted October 18, 2017 Report Share Posted October 18, 2017 I use a Mac Mop on almost every project. Quote Link to comment Share on other sites More sharing options...
Chunkthekid Posted October 18, 2017 Report Share Posted October 18, 2017 I haven't been doing this long so I haven't built up a very good collection of tools. I do all of my sanding with a spindle sander, a dremel, and by hand. I bought a bunch of different types of sanding wheels for my dremel and I use it all time, especially when I am doing intarsia (or when I have the patience to sand every edge of my puzzles) Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 18, 2017 Report Share Posted October 18, 2017 I'm like Denny, I use my Mac Mops on almost all the things I make. If it is curved items sometimes the Sanding Mop works better. I have 12" Harbor Freight disk sander and I use it a lot also. Quote Link to comment Share on other sites More sharing options...
MrsN Posted October 18, 2017 Report Share Posted October 18, 2017 The sanding tool you use depends a bit on the actual small piece that you are sanding. For fretwork pieces, I use a small butane torch to burn the "fuzzies" then use a foam sanding block. They basically wipe off. I have a skill octo detail sander. (Like a random orbital but not quite as powerful) I use it on most of my pieces that are not "delicate". I use a dremel with sanding drums to shape edges of more solid pieces like toys and some jewelry pieces. I used to use a spindle sander a lot but was downsizing my space and wanted workbench space more than the sander. I don't miss it all that much but if you do a lot of intarsia you probably would. I have a collection of needle files, emery boards, mini-belts, sanding blades and other stuff that looked/sounded cool. Now and then I use them but not often. Quote Link to comment Share on other sites More sharing options...
fredfret Posted October 18, 2017 Report Share Posted October 18, 2017 Sand Flee for most flat work hand or Dremel with sanding drum for other. Fredfret wichita, ks Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted October 19, 2017 Report Share Posted October 19, 2017 sand with a palm sander SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted October 19, 2017 Report Share Posted October 19, 2017 19 hours ago, Retired Scroller said: I typically use sanding files, belt sander and oscillating drum sander for my work. What other methods/tools are used for smaller projects? Is a flap sander an option for this smaller work?thanks for the input. i have a box full of flap wheels,sanding mops etc.Shame on me for putting them all in one box because i filed it somewhere and can't find them when i need them. SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted October 19, 2017 Report Share Posted October 19, 2017 (edited) Well all my work is 1/4 wood so I use my hand sand small files and emory boards.Except at the end when I glue them all together,then I use my belt sander. Edited October 19, 2017 by lawson56 SCROLLSAW703 1 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted October 20, 2017 Report Share Posted October 20, 2017 I do mostly fret work and my main samding tool is a sanding mop. Quote Link to comment Share on other sites More sharing options...
Scrappile Posted October 20, 2017 Report Share Posted October 20, 2017 Also,,, for the fuzzies the Mac Mops can't get I use a Dremel with a little wire brush thingy. It works super. Quote Link to comment Share on other sites More sharing options...
dgman Posted October 20, 2017 Report Share Posted October 20, 2017 To add to what has already been said, I sand the blank to finish grit, usually 220 grit before I cut. Then after cutting, I use a folded piece of 220 grit sandpaper to touch up any fuzzies. if the right blade and cutting techniques are use, I never have to sand the edges or inside cuts. JTTHECLOCKMAN 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted October 20, 2017 Report Share Posted October 20, 2017 2 hours ago, dgman said: To add to what has already been said, I sand the blank to finish grit, usually 220 grit before I cut. Then after cutting, I use a folded piece of 220 grit sandpaper to touch up any fuzzies. if the right blade and cutting techniques are use, I never have to sand the edges or inside cuts. I do the exact thing. Prep ahead of time and save agony latter. I can not figure out how you people use a mop sander on flat finished work and if it has delicate fret work. Never used a mop sander. 220 grit on a palm sander and all fuzzies are gone and any adhesive from tape is gone. dgman 1 Quote Link to comment Share on other sites More sharing options...
CharleyL Posted October 21, 2017 Report Share Posted October 21, 2017 I sometimes use a flap sander on larger work, but much of what I make is too small for even that. To deburr/defuzz edges, I frequently use fingernail files, sometimes trimmed narrower to fit in tiny places. A few strokes with the fine grit is usually all that is necessary, if you learn to follow the pattern lines well. Charley Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.