Popular Post trackman Posted December 5, 2017 Popular Post Report Share Posted December 5, 2017 (edited) I posted a request a few weeks back for a pattern and Bob jumped in an helped me with it. Made of oak with a piece of oak stained walnut for a backer. It is 3/4"x 8"x24" and is going to be hung outside on porch. Used poly that is used on boats for a finish which should hold up being on the oak. My saw is 21" so I cut the board into, cut the pattern, than glued back together. Thanks again Bob!! Edited December 5, 2017 by trackman Scrolling Steve, Sam777, frankorona and 8 others 11 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted December 5, 2017 Report Share Posted December 5, 2017 Very nicely done. Thanks for sharing this with us. DW Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted December 6, 2017 Report Share Posted December 6, 2017 That turned out great !...Nice work ! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted December 6, 2017 Report Share Posted December 6, 2017 7 hours ago, trackman said: I posted a request a few weeks back for a pattern and Bob jumped in an helped me with it. Made of oak with a piece of oak stained walnut for a backer. It is 3/4"x 8"x24" and is going to be hung outside on porch. Used poly that is used on boats for a finish which should hold up being on the oak. My saw is 21" so I cut the board into, cut the pattern, than glued back together. Thanks again Bob!! That's one piece of work to be extra proud of !!!!!!!!!!!!!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
Aggie Posted December 6, 2017 Report Share Posted December 6, 2017 Great cut to a great pattern. Quote Link to comment Share on other sites More sharing options...
lawson56 Posted December 6, 2017 Report Share Posted December 6, 2017 Down Right Awesome job on both the pattern and cutting. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted December 6, 2017 Report Share Posted December 6, 2017 great job Quote Link to comment Share on other sites More sharing options...
bobscroll Posted December 6, 2017 Report Share Posted December 6, 2017 What a lovely job you did on scrolling and finishing your project! Well done! Bob Quote Link to comment Share on other sites More sharing options...
penquin Posted December 7, 2017 Report Share Posted December 7, 2017 Nicely done, good work by both you and Bob Scroll. Like it, looks great. jim penquin Quote Link to comment Share on other sites More sharing options...
wombatie Posted December 7, 2017 Report Share Posted December 7, 2017 Great pattern by @bobscroll and equally great cutting by you Devaughn. Well done guys. Marg Quote Link to comment Share on other sites More sharing options...
spirithorse Posted December 8, 2017 Report Share Posted December 8, 2017 Great work by you and Bobscroll. You did a great job and I could not see any gaps from cutting the board in half but, I thought I would make a suggestion or two. Since your saw is 21" you should not have had to cut the board. You could have used a spiral blade (although I personally have done very little practicing with a spiral) or you could have turned the blade backward in the blade clamp and pulled the wood toward you as you cut instead of pushing the wood toward the throat of the saw as you normally do. Not meant to sound like criticism, just advice for your consideration. God Bless! Spirithorse Quote Link to comment Share on other sites More sharing options...
Lucky2 Posted December 8, 2017 Report Share Posted December 8, 2017 Del,you and Bob have both done an outstanding job, the Bickford's will display it with pride. Len Quote Link to comment Share on other sites More sharing options...
trackman Posted December 8, 2017 Author Report Share Posted December 8, 2017 11 hours ago, spirithorse said: Great work by you and Bobscroll. You did a great job and I could not see any gaps from cutting the board in half but, I thought I would make a suggestion or two. Since your saw is 21" you should not have had to cut the board. You could have used a spiral blade (although I personally have done very little practicing with a spiral) or you could have turned the blade backward in the blade clamp and pulled the wood toward you as you cut instead of pushing the wood toward the throat of the saw as you normally do. Not meant to sound like criticism, just advice for your consideration. God Bless! Spirithorse I had thought about the options you suggested. But with the letters so big I didn’t want the roughness of the spiral cut to show. And I didn’t trust my cutting with the blade in backwards. Thanks for the comments always welcome! Quote Link to comment Share on other sites More sharing options...
meflick Posted December 9, 2017 Report Share Posted December 9, 2017 Nice work from the Pattern from Bob to your turning it into an actual piece of artwork that will be well loved I have no doubt. thanks for sharing. Quote Link to comment Share on other sites More sharing options...
dgman Posted December 9, 2017 Report Share Posted December 9, 2017 Looks great Del ! Quote Link to comment Share on other sites More sharing options...
Rockytime Posted December 9, 2017 Report Share Posted December 9, 2017 GREAT two piece cutting! Quote Link to comment Share on other sites More sharing options...
newfie Posted December 10, 2017 Report Share Posted December 10, 2017 Nice work thanks for sharing Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.