Jump to content
2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
🎄 🎄 🎄 Ornaments For Charity 2024 - 545 FREE Ornament Patterns - NOW AVAILABLE! ×

I Bit the bullet eventually


savethebeer

Recommended Posts

I had been planning on making lots of things this winter. And guess what? I've made nothing for several weeks now. There was the cold, there was the weather, there was Christmas, there was good things on the telly, there was the cold, there was several episodes of me and the sniffles, there were several episodes of others having the flu and the sniffles etc. I was using any excuse.

I have a granddaughters 1st birthday, an 80th birthday, 2 wedding anniversaries all getting closer so I went out to the workshop this afternoon for the first time in weeks and I got productive. I feel like writing this on Bragging rights (not the items I cut, just the fact that I got off my backside and switched things on).

I even used the new table-top belt sander (that I got 2 months ago) for the first time.

Bob

Link to comment
Share on other sites

I just came in from working in the shop.. was a bit chilly out there at 10F.. good thing I was able to finish up my project within only a couple of hours or I could have gotten a little cold... I still have 3 custom orders to make.. hoping to get some of them or maybe all of them done tomorrow considering we have a heat wave coming in.. might have to wear shorts out there as it's supposed to get to 19F... Looking forward to those low to mid 30's that is supposed to get to next week.. that I complained about being cold a month or so ago, LOL :) 

Customers keep me out in the shop..by placing orders.. I don't willingly go out to work if it's below 30F.. Do have a little radiant propane heater that works well at keeping me warm.. other than my fingers.. So anyway.. customers typically keep me from getting too lazy... I have a ton of bookkeeping to catch up on here in the house where it's warm.. but.. procrastination has kicked in on doing that part of my job... Hate Bookkeeping but it's gotta get done for the Tax lady to get started so i'm not late on reporting my sales tax.. Uhggg LOL  

Link to comment
Share on other sites

I was back in my shop today. Starting a new line of products and wanted to get started on them. That led into a little bit of cleaning and picking up ( much needed ). It is 6 degrees outside, no direct heat in my shop and was a comfortable 52 degrees. Thankfully it's the whole bottom of my house and the hot water pipes run across the ceiling which helps a lot. 

Link to comment
Share on other sites

22 hours ago, savethebeer said:

I had been planning on making lots of things this winter. And guess what? I've made nothing for several weeks now. There was the cold, there was the weather, there was Christmas, there was good things on the telly, there was the cold, there was several episodes of me and the sniffles, there were several episodes of others having the flu and the sniffles etc. I was using any excuse.

I have a granddaughters 1st birthday, an 80th birthday, 2 wedding anniversaries all getting closer so I went out to the workshop this afternoon for the first time in weeks and I got productive. I feel like writing this on Bragging rights (not the items I cut, just the fact that I got off my backside and switched things on).

I even used the new table-top belt sander (that I got 2 months ago) for the first time.

Bob

Wow Bob, you sound just like me. I'll grab any excuse to sit here by my computer rather than get all dressed and go out to my shop. But, the time is nearly here where I will get bored and once again get back to my creative needs.

Ray

 

Link to comment
Share on other sites

On 1/2/2018 at 3:37 PM, savethebeer said:

I had been planning on making lots of things this winter. And guess what? I've made nothing for several weeks now. There was the cold, there was the weather, there was Christmas, there was good things on the telly, there was the cold, there was several episodes of me and the sniffles, there were several episodes of others having the flu and the sniffles etc. I was using any excuse.

I have a granddaughters 1st birthday, an 80th birthday, 2 wedding anniversaries all getting closer so I went out to the workshop this afternoon for the first time in weeks and I got productive. I feel like writing this on Bragging rights (not the items I cut, just the fact that I got off my backside and switched things on).

I even used the new table-top belt sander (that I got 2 months ago) for the first time.

Bob

Bob It's 53 degrees here and I'm freezing.No heater in the car and and only a small next to my bed that cycles on an off every 30 seconds to keep the chill off me .i can't afford to leave it run in a 20" high ceiling 25" long warehouse x 12" i have a heating pad which is a blessing from last year and someone gave me a comforter .i'm freezing now being on the club but you do what you got to do!!!!!!!!!!!!!

Link to comment
Share on other sites

Got my second knee replaced just before Christmas so I've also been in a waiting game before making more sawdust - recovery going well but I'm getting tired of sittin' in front of the TV watching old dusters - decided to got out to the Shed just before noon today and fire it up (despite the cold) - projects-in-waiting that I am kinda excited about are: finishing up a fleet of Paddling Moose (all parts made for 15 Moose - just waiting for assembly and finishing); refinishing an antique desk (thinking its about 80% done) and;  making a swinging cradle for our 1st grandchild (expected to make her appearance in late April).  Have a lengthy list of other projects on my wish list but these are the three that will be done before anything else is started.  Gonna be a busy and fun year.

 

Jay

Link to comment
Share on other sites

6 hours ago, RangerJay said:

Got my second knee replaced just before Christmas so I've also been in a waiting game before making more sawdust - recovery going well but I'm getting tired of sittin' in front of the TV watching old dusters - decided to got out to the Shed just before noon today and fire it up (despite the cold) - projects-in-waiting that I am kinda excited about are: finishing up a fleet of Paddling Moose (all parts made for 15 Moose - just waiting for assembly and finishing); refinishing an antique desk (thinking its about 80% done) and;  making a swinging cradle for our 1st grandchild (expected to make her appearance in late April).  Have a lengthy list of other projects on my wish list but these are the three that will be done before anything else is started.  Gonna be a busy and fun year.

 

Jay

Good you have your projects lined up,i just go with the flow to what ever comes in

Link to comment
Share on other sites

7 hours ago, RangerJay said:

Got my second knee replaced just before Christmas so I've also been in a waiting game before making more sawdust - recovery going well but I'm getting tired of sittin' in front of the TV watching old dusters - decided to got out to the Shed just before noon today and fire it up (despite the cold) - projects-in-waiting that I am kinda excited about are: finishing up a fleet of Paddling Moose (all parts made for 15 Moose - just waiting for assembly and finishing); refinishing an antique desk (thinking its about 80% done) and;  making a swinging cradle for our 1st grandchild (expected to make her appearance in late April).  Have a lengthy list of other projects on my wish list but these are the three that will be done before anything else is started.  Gonna be a busy and fun year.

 

Jay

Oooh! I remember your paddling Moose Jay.  Looking forward to seeing them again.:D

Rob

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...