jbrowning Posted January 6, 2018 Report Share Posted January 6, 2018 Has anyone ever replaced their hose for the sawdust blower/sucker? If so what did you use? Mine is the old clear plastic tube that won't stay positioned where I put it. It has a mind of it's own. Oh and my quick clamp came in today and man that is so nice. Thanks again for everyone's help. Jim OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 6, 2018 Report Share Posted January 6, 2018 (edited) Mine came with the "Loc-line" attached as you see. It works fine. It was mounted on the other side of the upper arm but I move it to the side it is now on. Not sure where you get the little brass fitting to insert into the hose and screw the Loc-line to. Should not be hard to find though. Maybe from Loc-line, maybe Home Depot, maybe auto parts store. Edited January 6, 2018 by Scrappile OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
tonylumps Posted January 6, 2018 Report Share Posted January 6, 2018 Loc line sells from there site .But I bought some off of Amazon They work great .It is just a matter of figuring out what you will need to modify your saw OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted January 6, 2018 Report Share Posted January 6, 2018 Hawk ( Bushton ) sells a kit for the older saws that had just the clear hose.. which has everything needed to convert it to a Loc line.. so I assume you should be able to get something similar.. maybe from Hegner ( though probably a bit pricey from Hegner ). JTTHECLOCKMAN and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
tford Posted January 6, 2018 Report Share Posted January 6, 2018 (edited) Hi Jim I have not had that problem with my Hegner, but I am concerned I will not be able to resolve it. I don't have much support for Hegners in South Africa. I was considering I may have to look at piping used on fish tanks should I require any replacements or home fixes. All the best Tyrone Edited January 6, 2018 by tford OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted January 8, 2018 Report Share Posted January 8, 2018 Jim, I'm thinking that someone had set your saw up for using some type of dust collection and the original flex air hose was taken off. I may not know what I am talking about. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 8, 2018 Report Share Posted January 8, 2018 (edited) I think if you go the Loc-line like in my picture you can even get that brass connection from an ACE Hardware. I was one this evening, looked in the plumbing section and they had a bunch of different sizes. Edited January 8, 2018 by Scrappile OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
jbrowning Posted January 8, 2018 Author Report Share Posted January 8, 2018 Here is a picture of what I'm looking at. The piece I'm wanting/needing to replace is the clear tube that runs down to the table. All the other tubing is working like it is suppose to. Sorry I wasn't in the shop this weekend doing work inside the house. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted January 8, 2018 Report Share Posted January 8, 2018 I see, well again, I would try to find a way to fasten some Loc-line to the metal piece that is clamped to the saw. Where the arrow points. Could the end of that metal tube be threaded? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
jbrowning Posted January 8, 2018 Author Report Share Posted January 8, 2018 Hi Paul, the metal tube isn't threaded right now. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
jbrowning Posted January 11, 2018 Author Report Share Posted January 11, 2018 Just an update. I went ahead and bit the bullet and ordered the Sawdust Management System. Should be in next week sometime. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted January 11, 2018 Report Share Posted January 11, 2018 All that tube is for a vac system. Trying to catch dust with that small tube is a not worth the effort in my opinion. To me a vac on a scrollsaw is a waste of time and effort. I would get the articulating hose and just blow the dust away from you. When done scrolling for the day take the vac and clean up each day. saves wear and tear on a shop vac and the dust is not that much. Yes wear a dust mask but that is all I have been doing for over 30 years. Listening to a shop vac all the time is nerve racking to me. This is just my opinion. Good luck. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
blights69 Posted January 12, 2018 Report Share Posted January 12, 2018 On 06/01/2018 at 3:44 AM, Scrappile said: Mine came with the "Loc-line" attached as you see. It works fine. It was mounted on the other side of the upper arm but I move it to the side it is now on. Not sure where you get the little brass fitting to insert into the hose and screw the Loc-line to. Should not be hard to find though. Maybe from Loc-line, maybe Home Depot, maybe auto parts store. Nice work in progress Paul be sure to post that up when finished Quote Link to comment Share on other sites More sharing options...
jbrowning Posted January 12, 2018 Author Report Share Posted January 12, 2018 The Sawdust Management System should come in to me next Tuesday. I am hoping this will work, due to my asthma I don't really care for blowing sawdust all over the place and yes I wear a respirator when I'm using the scroll saw. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 12, 2018 Report Share Posted January 12, 2018 47 minutes ago, jbrowning said: The Sawdust Management System should come in to me next Tuesday. I am hoping this will work, due to my asthma I don't really care for blowing sawdust all over the place and yes I wear a respirator when I'm using the scroll saw. I put together a vacuum system for my Dewalt and I will do the same for the Hegner. It works so well with the Dewalt, I can't believe folks don't do it for their saws. Even if they have to put their shop vac outdoors to stifle the noise, it is worth it. And incorporating either a remote on/off switch or buying a plug-in that triggers the vac when sawing, it will make your life much better and ease your breathing problems. Ray Quote Link to comment Share on other sites More sharing options...
jbrowning Posted January 13, 2018 Author Report Share Posted January 13, 2018 Hi Ray, when you get yours set up. Would you mind sharing with me. My shop vac sets right in between my Hegner and my Dewalt and I use it anytime my scroll saw is running. Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 13, 2018 Report Share Posted January 13, 2018 1 hour ago, jbrowning said: Hi Ray, when you get yours set up. Would you mind sharing with me. My shop vac sets right in between my Hegner and my Dewalt and I use it anytime my scroll saw is running. Did you see the pics of my system on my Dewalt? I have a Fein in one corner of my shop and the long hose from it goes all the way over to my saw in the other corner. I set it up so I could use the vac as my regular shop vac too. I had to make some attachments for it because it came with nothing. A heat gun and a couple of regular attachments did the trick. Let me know if you can't find those pics. It's really pretty easy to make. I didn't glue any of the connections so that I could change it around if needed. Ray Quote Link to comment Share on other sites More sharing options...
jbrowning Posted January 13, 2018 Author Report Share Posted January 13, 2018 Thanks Ray, I will see if I can find those pictures of yours. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.