edward Posted January 27, 2018 Report Share Posted January 27, 2018 Just wondering if anyone charges there power tools until they need to be used, I find that when I go to use them the battery is dead or nearly out of juice. just curious what people think. edward OCtoolguy and lawson56 2 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted January 27, 2018 Report Share Posted January 27, 2018 29 minutes ago, edward said: Just wondering if anyone charges there power tools until they need to be used, I find that when I go to use them the battery is dead or nearly out of juice. just curious what people think. edward I googled it once and found out to keep the batterys charged every 3 months to keep them in shape. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 27, 2018 Report Share Posted January 27, 2018 I charge only when the battery is totally dead. Then I leave the battery on the charger until needed again. There is always one battery in the charger. OCtoolguy and Scrolling Steve 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 27, 2018 Report Share Posted January 27, 2018 I tried following all the rules on every kind of battery from the nicads all the way through to the lithiums. I never had any luck with any of them until the lithiums came out. They finally have them perfected in my book. I have two 20 volts B&D batteries for my two drills and saw. I never charge them unless I have used them pretty hard. Then I charge them until I need them again. No hard and fast rule. They are doing fine and are each over 3 years old. I bought the two drills on a close out at H/D for $20 each. If the batteries go bad, I'll just buy a new drill even if I have to pay full price. Black and Decker is outstanding in their customer service. Another story though. Ray stoney 1 Quote Link to comment Share on other sites More sharing options...
crupiea Posted January 27, 2018 Report Share Posted January 27, 2018 I quit using cordless tools for this very reason. have to drill a hole, fine, wait 3 hours to charge the drill. screw that, just plug it in and 30 seconds later the task is done. OCtoolguy and SCROLLSAW703 1 1 Quote Link to comment Share on other sites More sharing options...
RangerJay Posted January 28, 2018 Report Share Posted January 28, 2018 Not sure why - but I have a ridiculous collection of hand drills - 3 corded and 3 cordless ..... my favourite is an ancient Makita 7.2 volt cordless that my wife bought me 30 some years ago - now on the 3rd battery. It is great for small jobs and perfect for use with the sanding mop on fretwork projects that need a little gentler touch than the drill press will give. Jay OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 28, 2018 Report Share Posted January 28, 2018 6 minutes ago, RangerJay said: Not sure why - but I have a ridiculous collection of hand drills - 3 corded and 3 cordless ..... my favourite is an ancient Makita 7.2 volt cordless that my wife bought me 30 some years ago - now on the 3rd battery. It is great for small jobs and perfect for use with the sanding mop on fretwork projects that need a little gentler touch than the drill press will give. Jay I was with Snap-On Tools back then and I bought one of the first Makita's. It was orange. Came in a metal box. That battery lasted until the drill finally wore out. The 9.6 of that same vintage was a winner too. Ray Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted January 28, 2018 Report Share Posted January 28, 2018 4 hours ago, RangerJay said: Not sure why - but I have a ridiculous collection of hand drills - 3 corded and 3 cordless ..... my favourite is an ancient Makita 7.2 volt cordless that my wife bought me 30 some years ago - now on the 3rd battery. It is great for small jobs and perfect for use with the sanding mop on fretwork projects that need a little gentler touch than the drill press will give. Jay I have 5 of the Makitas that use the 9volt batteries. Find them at times at yard sales. $5 good to go. Love those drills. No hard fast rule for charging. I try to keep at least one battery charged and if doing a project I will 5 or 6 batteries on charge. I have the line of makita tools that take that battery. Has never let me down. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted January 28, 2018 Report Share Posted January 28, 2018 I only have 2.I don't use them that often.So I charge them when there dead.Mine dosen't take that long.I have a Ryobi drill and saw. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted January 28, 2018 Report Share Posted January 28, 2018 16 hours ago, Rockytime said: I charge only when the battery is totally dead. Then I leave the battery on the charger until needed again. There is always one battery in the charger. What Rocky said !......I have a Makita and a B&D that i use on a regular basis ! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted January 28, 2018 Report Share Posted January 28, 2018 I have had my Makita 18V Lithium batteries for 6-8 years. It is recommended not to let them completely discharge or sit completely discharged. When my batteries start to show a slowdown, I put them on the charger. I do use my drills very often. I have a Milwaukee 12V drill that has a battery charge indicator and when it gets low, it goes on the charger. My son-in-law has the same Makita 18 V batteries and he let his set discharged and they stopped working. A new battery was about $80. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted January 28, 2018 Report Share Posted January 28, 2018 I think it depends on the battery and the charger as some batteries charge from where they last charge too and others will charge until they get so hot they are damaged and some chargers will cut out and others continue to charge that will also damage the battery so check which battery you have and if the charger cuts out or not. Roly OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted January 28, 2018 Report Share Posted January 28, 2018 Todays batteries and chargers are many steps ahead of what they were when battery operated tools first came out. I had an old Milwaukee 7.2 volt drill with a keyed chuck that would keep drilling but the battery life was not long. Sold it for $20. Today they run lawn equipment with batteries. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted January 28, 2018 Report Share Posted January 28, 2018 Our lawn mower and leaf blower are battery operated. I always try to make things easy for my wife. crupiea, OCtoolguy and Phantom Scroller 3 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted January 28, 2018 Report Share Posted January 28, 2018 I heard somewhere that the Chevy Volt is going to come out next year with a drill chuck in the front and a sander in the rear. Just sayin............. Ray Phantom Scroller 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.