Popular Post heppnerguy Posted February 3, 2018 Popular Post Report Share Posted February 3, 2018 This is a great pattern by Fish. It is Charlie Chaplin from the movie, "Tramp". It is the story of a bum that finds an abandon baby on the street and ends up raising him. The boy and the tramp become quite the companions. It is from the silent movies era and is a rather heart wrenching film. If you have never seen it, you can find it on line and watch it for free. If you have never watched a silent film before or if you have and thought they were dull and stupid, do yourself a favor and watch this one. I know that I did not do a very good job on the pattern but I know that I will do this one again sometime. I saw it and knew I just had to give it a try. I used a #1 spiral on it and did not like the results of the blade I used but was still glad that I gave it a go. Dick heppnerguy Lucky2, frankorona, paul44224 and 8 others 9 2 Quote Link to comment Share on other sites More sharing options...
rdatelle Posted February 3, 2018 Report Share Posted February 3, 2018 Dick, it doesn't look that bad. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 3, 2018 Author Report Share Posted February 3, 2018 4 minutes ago, rdatelle said: Dick, it doesn't look that bad. I would increase the size of the pattern a little and choose a blade I am already happy with. This was a blade I bought for the first and I do not like it at all, it is too aggressive for me. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted February 3, 2018 Report Share Posted February 3, 2018 Very nicely cut Dick. That came out great. Thanks for sharing this with us. DW heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted February 3, 2018 Report Share Posted February 3, 2018 Looks good to me Dick. Those spirals are a bugger. I try to stay away from them as much as I can. Mine always look so darn fuzzy on the back when I use them. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Gonzo Posted February 3, 2018 Report Share Posted February 3, 2018 I thought it looks awesome! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Dan Posted February 3, 2018 Report Share Posted February 3, 2018 Nice job! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 3, 2018 Author Report Share Posted February 3, 2018 1 hour ago, Dave Monk said: Looks good to me Dick. Those spirals are a bugger. I try to stay away from them as much as I can. Mine always look so darn fuzzy on the back when I use them. sThat definitely is a big drawback on them. There are some patterns where they just are the only good blade to use on a pattern, This one could have worked out better had I used the spiral blades I like. I purchased some Pagas blades and I do not like them much. they make their teeth too large and they are too aggressive for my liking. If I was cutting 3/4 walnut, then maybe they would work out well, not even sure about that. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 3, 2018 Author Report Share Posted February 3, 2018 Thank you all for the encouragement. It is often given too generously, but it is a wonderful pattern and wish I could have done a better job on it. Every once in awhile one cuts something for themselves and luckily that was the case on this one. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted February 3, 2018 Report Share Posted February 3, 2018 Being a Chaplain fan, I think it's really cool! Thanks for sharing heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted February 3, 2018 Report Share Posted February 3, 2018 What size is it Dick? Is the frame making it look smaller? If it's on the small size I would definitely make it bigger. Great looking cutting though. Marg Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted February 3, 2018 Report Share Posted February 3, 2018 5 hours ago, heppnerguy said: This is a great pattern by Fish. It is Charlie Chaplin from the movie, "Tramp". It is the story of a bum that finds an abandon baby on the street and ends up raising him. The boy and the tramp become quite the companions. It is from the silent movies era and is a rather heart wrenching film. If you have never seen it, you can find it on line and watch it for free. If you have never watched a silent film before or if you have and thought they were dull and stupid, do yourself a favor and watch this one. I know that I did not do a very good job on the pattern but I know that I will do this one again sometime. I saw it and knew I just had to give it a try. I used a #1 spiral on it and did not like the results of the blade I used but was still glad that I gave it a go. Dick heppnerguy Nicely done Richard!!!!!!!!!! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
lawson56 Posted February 3, 2018 Report Share Posted February 3, 2018 Dick I think you did a Fantastic job,I have tried to cut with Spirals.I have seen tThe Tramp.I agree with you.Again,Fantastic job. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
newfie Posted February 3, 2018 Report Share Posted February 3, 2018 Nice work thanks for sharing heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted February 3, 2018 Report Share Posted February 3, 2018 Good project Dick! Thanks for showing, Bob heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted February 3, 2018 Report Share Posted February 3, 2018 Looks great from here Dick !.....Nice work ! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted February 3, 2018 Report Share Posted February 3, 2018 awesome job heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted February 3, 2018 Report Share Posted February 3, 2018 (edited) Looks real good, DIck. I really like the way you framed it also. Edited February 3, 2018 by Scrappile heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Brianr24 Posted February 3, 2018 Report Share Posted February 3, 2018 Looks really good to me heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 3, 2018 Author Report Share Posted February 3, 2018 10 hours ago, wombatie said: What size is it Dick? Is the frame making it look smaller? If it's on the small size I would definitely make it bigger. Great looking cutting though. Marg It is cut on an 8 X ii.5 inch.. the frame is rather large but it is for that size. I bought it at a garage sale and decided that since I was making it for myself, I would use the frame. I have to agree that it does make it look like a smaller size then it is Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 3, 2018 Author Report Share Posted February 3, 2018 12 hours ago, new2woodwrk said: Being a Chaplain fan, I think it's really cool! Thanks for sharing You will have to download it and put it in your files until you are ready to take it on. The pattern is in our pattern library here Dick heppnerguy new2woodwrk 1 Quote Link to comment Share on other sites More sharing options...
Fish Posted February 3, 2018 Report Share Posted February 3, 2018 Very nice work! I really like the way you cut that and the size.. great job heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
woodduck Posted February 3, 2018 Report Share Posted February 3, 2018 You did a great job on this one Dick especially using a #1 blade I usually use a 3/0 spiral to do something like that. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
GPscroller Posted February 4, 2018 Report Share Posted February 4, 2018 Good job on a great pattern Dick. Have often looked at the pattern of Chaplin and the lad looking around the corner (on my to-do list). Jeff heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted February 4, 2018 Author Report Share Posted February 4, 2018 18 hours ago, Fish said: Very nice work! I really like the way you cut that and the size.. great job Thanks for making such a wonderful pattern.. I am sorry I did not do it justice but I will cut it again sometime in the future and I think I can make you proud with the next one. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.