Popular Post Scrappile Posted February 21, 2018 Popular Post Report Posted February 21, 2018 (edited) I saw a similar piece on Scroller's Cafe, a quilt block memorial for a quilter lady that passed away. It was done my a member named Driver. I just thought it was really neat and so I made one for my wife. Not a memorial, just to hang in her quilt room. Heppnerguy did the pattern for the saying that will hang below the quilt block. Thank you, Dick and thanks to "Jollyred", "Worbler" and "Birchbark" who also made patterns. I will use them if I get more requests for this piece. I really enjoyed making the quilt block and know I will make others. I hope to improve my jig that I used to cut the 32 triangles with. It is just a hair off. Does good, but not perfect. On the quilt block I used: Zebra Wood, Bloodwood, Black Walnut and Sycamore. The plaque is Butternut. Edited February 21, 2018 by Scrappile Lucky2, oldhudson, dgman and 14 others 17 Quote
amazingkevin Posted February 21, 2018 Report Posted February 21, 2018 2 hours ago, Scrappile said: I saw a similar piece on Scroller's Cafe, a quilt block memorial for a quilter lady that passed away. It was done my a member named Driver. I just thought it was really neat and so I made one for my wife. Not a memorial, just to hang in her quilt room. Heppnerguy did the pattern for the saying that will hang below the quilt block. Thank you, Dick and thanks to "Jollyred", "Worbler" and "Birchbark" who also made patterns. I will use them if I get more requests for this piece. I really enjoyed making the quilt block and know I will make others. I hope to improve my jig that I used to cut the 32 triangles with. It is just a hair off. Does good, but not perfect. On the quilt block I used: Zebra Wood, Bloodwood, Black Walnut and Sycamore. The plaque is Butternut. Very nice indeed !Proud recognition for the woman!!!!!! Scrappile 1 Quote
wombatie Posted February 21, 2018 Report Posted February 21, 2018 Beautiful. I bet she was over the moon with it. You certainly did a great job. Marg Scrappile 1 Quote
lawson56 Posted February 21, 2018 Report Posted February 21, 2018 Down Right Awesome job!!I bet she is Crazy over it. Scrappile 1 Quote
Scrolling Steve Posted February 21, 2018 Report Posted February 21, 2018 That is wonderful work !...Beautiful wood ! Scrappile 1 Quote
Dave Monk Posted February 21, 2018 Report Posted February 21, 2018 That is a beautiful quilt block Dick. Pieces sure fit good. Scrappile 1 Quote
stoney Posted February 21, 2018 Report Posted February 21, 2018 Beautiful! Great job Paul on the quilt block and plaque. My wife is also a quilter and she would love one. Thanks for showing us. Scrappile 1 Quote
new2woodwrk Posted February 21, 2018 Report Posted February 21, 2018 That's a very cool design - thanks for sharing Scrappile 1 Quote
meflick Posted February 21, 2018 Report Posted February 21, 2018 Beautiful piece Paul and I am sure you got major brownie points with the wife as I am sure she loves it. thanks for sharing. Scrappile 1 Quote
jbrowning Posted February 21, 2018 Report Posted February 21, 2018 Oh I thought you were going to say you bought the wife a new vacuum cleaner. Scrappile 1 Quote
rjweb Posted February 21, 2018 Report Posted February 21, 2018 Excellent cutting, the wording is perfect, RJ Scrappile 1 Quote
trackman Posted February 21, 2018 Report Posted February 21, 2018 That is great! Can you show the jig you used to make those great cuts? Thanks Scrappile 1 Quote
Scrappile Posted February 21, 2018 Author Report Posted February 21, 2018 11 minutes ago, trackman said: That is great! Can you show the jig you used to make those great cuts? Thanks I tried several configurations with my miter gauge and saw fence and just could not come up with a very accurate, repeatable, and safe method. Then I remembered my picture frame jig I had hanging on the wall. I made it sever years ago. It worked great. I add a the stripes of wood to work as stop with double sided tape. With this I cut a triangle, flipped the wood over and cut the next triangle. There are times I wish I wouldn't have flipped the wood, so the grain would have match better, (same side of the wood up). I now have something I am going to try next time so I can move the wood from the left to the right side of the jig to cut the next triangle. I would also like to make a similar jig with a 60 degree angle to making diamonds. I always enjoy jig making. Frank Pellow 1 Quote
trackman Posted February 21, 2018 Report Posted February 21, 2018 Thanks for the picture! Very simple setup & great idea. Now if I will remember next time I need it LOL thanks Quote
Dan Posted February 21, 2018 Report Posted February 21, 2018 Great words! Great work! Great collaboration from The Village! Thanks for sharing. Scrappile 1 Quote
GPscroller Posted February 22, 2018 Report Posted February 22, 2018 That came out really great Paul. Jeff Scrappile 1 Quote
Lucky2 Posted February 22, 2018 Report Posted February 22, 2018 Nicely done Paul, you have done an incredible job of cutting the printing out,and the seams of the wood are oh so tight. Len Scrappile 1 Quote
newfie Posted February 22, 2018 Report Posted February 22, 2018 Looks great thanks for sharing Scrappile 1 Quote
Frank Pellow Posted February 22, 2018 Report Posted February 22, 2018 (edited) 21 hours ago, Scrappile said: I tried several configurations with my miter gauge and saw fence and just could not come up with a very accurate, repeatable, and safe method. Then I remembered my picture frame jig I had hanging on the wall. I made it sever years ago. It worked great. I add a the stripes of wood to work as stop with double sided tape. With this I cut a triangle, flipped the wood over and cut the next triangle. There are times I wish I wouldn't have flipped the wood, so the grain would have match better, (same side of the wood up). I now have something I am going to try next time so I can move the wood from the left to the right side of the jig to cut the next triangle. I would also like to make a similar jig with a 60 degree angle to making diamonds. I always enjoy jig making. I like this technique! Edited February 22, 2018 by Frank Pellow Quote
rdatelle Posted February 22, 2018 Report Posted February 22, 2018 Wow Paul, that came out great. Jigs are great. Wish I knew how to make some. LOL. Scrappile 1 Quote
WayneG Posted February 23, 2018 Report Posted February 23, 2018 (edited) that is a great piece Paul, my mom is a master quilter and I have thought of doing something like this for her. perhaps you are pushing me to do so.... Edited February 23, 2018 by WayneG Scrappile 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.