jasdon79 Posted August 28, 2010 Report Share Posted August 28, 2010 hi all iam going to start this great hobby i was going to buy a haguar fretsaw but i have just been offred a startrite saw is old and very big is this machine any good for this hobby thanks all for your help in advance Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 28, 2010 Report Share Posted August 28, 2010 JASDON,FROM WHAT YOU TOLD US I LOOKED FOR YOUR SAW .iF THIS IS IT IT WILL BE A GOOD LEARNING SO SO YOU CAN SEE WHAT YOU LIKE AND DON'T LIKE ABOUT THE SAW.LIGHTING ESAY BLADE CHANGES,FOOT SWITCH DUST COLLECTOR ETC.BLADE TENSTION IN THE BACK WEARS YOU OUT AND IS NOT DESIRERABLE BUT THAT WHAT I HAD FOR YEARS AND ENJOYED SCROLLING .KEEP POSTING AND YOU'LL GET DIFFERANT VEIWS FOR THE MEMBERS HERE THANKS FOR ASKING Quote Link to comment Share on other sites More sharing options...
Oges Posted August 29, 2010 Report Share Posted August 29, 2010 I started on a saw like that (different colour and badge, but same build) and it served me well in that it showed me that I was interested in the hobby and wanted to go further with it. Hopefully it should do the same for you too. Does it take pinned blades? as the saw I had like that only took pinned blades and it does limit you to what you can saw with it as you need to allow for bigger entry holes Brett Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.