bowers25 Posted March 5, 2018 Report Share Posted March 5, 2018 Got her torn down and lubed up last weekend.....Got her bolted down and desk figured out yesterday......so today after yard work, I had some time to make my Beautiful Bride and Princess Daughter some wall hangers. My wife said I used to look at her, the same way I'm looking at my new baby.....lol MTCowpoke22, WayneMahler, OCtoolguy and 6 others 8 1 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted March 5, 2018 Report Share Posted March 5, 2018 5 minutes ago, bowers25 said: Got her torn down and lubed up last weekend.....Got her bolted down and desk figured out yesterday......so today after yard work, I had some time to make my Beautiful Bride and Princess Daughter some wall hangers. My wife said I used to look at her, the same way I'm looking at my new baby.....lol Whoa! Looks better than if done with a CNC ! I know that look as i've had 10 dewalts,sill have 9 and smiling everytime i turn it on .You've done a lot of work to knock these out 3D ! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 5, 2018 Report Share Posted March 5, 2018 43 minutes ago, bowers25 said: Got her torn down and lubed up last weekend.....Got her bolted down and desk figured out yesterday......so today after yard work, I had some time to make my Beautiful Bride and Princess Daughter some wall hangers. My wife said I used to look at her, the same way I'm looking at my new baby.....lol Wow! Everything looks great. You have your saw on a much steeper angle than I have mine. But, I like your whole set up. Quote Link to comment Share on other sites More sharing options...
Rob Posted March 5, 2018 Report Share Posted March 5, 2018 Very nice, and a cold beer too! Decisions, decisions.... Rob OCtoolguy and WayneMahler 2 Quote Link to comment Share on other sites More sharing options...
MrsN Posted March 5, 2018 Report Share Posted March 5, 2018 Very cool! I am a bit jealous of the green grass in your yard. I really like the arrows, who's patterns are they? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted March 5, 2018 Report Share Posted March 5, 2018 What a way to work! My shop is in my garage but it is partitioned off. However I see you have the same Kobalt saw I have. I also roll mine out on the driveway. Working outside in the sunshine is great. When my second Hawk is up an running I will be able to scroll outside too. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
daveww1 Posted March 5, 2018 Report Share Posted March 5, 2018 very nice OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
ike Posted March 5, 2018 Report Share Posted March 5, 2018 Nice set up . the saw angle is a little higher than mine. The arrows are realy nice where did yu get the pattern? and the green grass looks good hoping mine will dryup and dturn green. IKE OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
bowers25 Posted March 5, 2018 Author Report Share Posted March 5, 2018 11 hours ago, MrsN said: Very cool! I am a bit jealous of the green grass in your yard. I really like the arrows, who's patterns are they? The metal arrows my wife picked up at one of the hobby shops a fews weeks ago and asked if I'd hang them. I did like any of the options I had to hang them, didn't want to be able to see any of the hanger material, so I scroll out the wood. I traced the wood out with a 1/4" washer as a spacer. Got the idea with the washer from a youtube video by Charles Dearing. PS....the grass is not were I'd like to be right now, when its up and going it's has to be cut a least every five days........although I may need to rethink it this year. All four of the kids will be in college and that leaves only me to do all the yard work, lol. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
bowers25 Posted March 5, 2018 Author Report Share Posted March 5, 2018 26 minutes ago, ike said: Nice set up . the saw angle is a little higher than mine. The arrows are realy nice where did yu get the pattern? and the green grass looks good hoping mine will dryup and dturn green. IKE The metal arrows my wife picked up at one of the hobby shops a fews weeks ago and asked if I'd hang them. I did like any of the options I had to hang them, didn't want to be able to see any of the hanger material, so I scroll out the wood. I traced the wood out with a 1/4" washer as a spacer. Got the idea with the washer from a youtube video by Charles Dearing. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted March 5, 2018 Report Share Posted March 5, 2018 Looking good. I like the setup you did. Like your choice of beverage too, had a few of those last night. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
bowers25 Posted March 5, 2018 Author Report Share Posted March 5, 2018 2 hours ago, WayneMahler said: Looking good. I like the setup you did. Like your choice of beverage too, had a few of those last night. Yuengling Lager is by far is the best beer I have ever had and that says a lot coming from a die hard "Shiner Bock" drinker. Tried it approx 7 years ago up in New York at Cooperstown when one of my son's was invited to play in a select baseball tournament near the Baseball HOF. We cant get Yuengling here in Texas (although they have starting selling it in Louisiana), so I have some friends from my side / second job that travel all over the US and they usually bring me a case or two. WayneMahler and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted March 5, 2018 Report Share Posted March 5, 2018 We have a"booze" store here that carries just about everything. I'll check it out there. I like trying out different brews. Ray Quote Link to comment Share on other sites More sharing options...
bowers25 Posted March 5, 2018 Author Report Share Posted March 5, 2018 Yuengling is from Pottsville, PA.......the oldest brewery in the US.......they only distribute east of the Mississippi River, until approx a year ago they started distributing in Louisiana. I have not been able to locate and/or order it from any store in my area. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted March 5, 2018 Report Share Posted March 5, 2018 (edited) Love the beer, they have it here in Panama City Beach and it is my favorited. As a Canadian I' m an expert on beer LOL. Matter of fact just got back from a round of golf and enjoying one right now, might have 2 or so.... Edited March 5, 2018 by scrollerpete OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Fab4 Posted March 5, 2018 Report Share Posted March 5, 2018 Hi Skip Nice work, Please see the Coffee House for a new thread in regards to this one I did not want to steal this post so I created a new one I don't drink so can't comment on that one Fab4 OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
WayneMahler Posted March 6, 2018 Report Share Posted March 6, 2018 4 hours ago, bowers25 said: Yuengling Lager is by far is the best beer I have ever had and that says a lot coming from a die hard "Shiner Bock" drinker. Tried it approx 7 years ago up in New York at Cooperstown when one of my son's was invited to play in a select baseball tournament near the Baseball HOF. We cant get Yuengling here in Texas (although they have starting selling it in Louisiana), so I have some friends from my side / second job that travel all over the US and they usually bring me a case or two. My son lives in Corpus Christi so when we go down to visit I drink DOS XX. Still seems really strange going to grocery store and buying beer and stuff down there. Hoping to visit again in 2 years. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
bowers25 Posted March 6, 2018 Author Report Share Posted March 6, 2018 3 hours ago, Fab4 said: Hi Skip Nice work, Please see the Coffee House for a new thread in regards to this one I did not want to steal this post so I created a new one I don't drink so can't comment on that one Fab4 Roger That OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Ron Johnson Posted March 6, 2018 Report Share Posted March 6, 2018 I'm too old now for a mistress but yours is looking good and set up well. Congrats. Beautiful work. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
lew Posted March 6, 2018 Report Share Posted March 6, 2018 Is there any advantage to working on a angle like the setup you have? OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
MrsN Posted March 6, 2018 Report Share Posted March 6, 2018 1 hour ago, lew said: Is there any advantage to working on a angle like the setup you have? Many people like it. it gives a different angle to view the blade, and some like that. Myself, I couldn't get used to not having a flat table and went back to flat. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Bill WIlson Posted March 6, 2018 Report Share Posted March 6, 2018 3 hours ago, lew said: Is there any advantage to working on a angle like the setup you have? I think it's a little more ergonomically friendly. Stay hunched over a scroll saw for extended periods of time and you look for small improvements that relieve some of the tension in your back, neck, shoulders and wrists. It makes a difference for some. I know I like mine better tilted. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.