WayneMahler Posted March 19, 2018 Report Posted March 19, 2018 Wipe it off with a rag best I can if still a little wet. Other then that I rub them together and it goes away pretty easy. Quote
barb.j.enders Posted March 19, 2018 Report Posted March 19, 2018 Goo Gone is what I use. I have also used an old pencil to "pick up" the pattern. Just tap the edge to lift it off the surface. A little less sticky on the fingers. new2woodwrk 1 Quote
heppnerguy Posted March 20, 2018 Report Posted March 20, 2018 I used to use blue painter's tape and a large glue stick. I would put glue on the tape and the back of the pattern. After I had the pattern in place, I would take a paper towel or a rag and simply remove any over lapping glue on the blue tape with the paper towel or rag. never have I had a pattern come loose when cutting it if I glue both the tape and the pattern. Least expensive way to put the pattern on the wood also Dick heppnerguy new2woodwrk 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.