smitty0312 Posted April 9, 2018 Report Share Posted April 9, 2018 Tried this yesterday....very pleased with the results.....it will have a place mixed with my scroll saw work somewhere....”unique”is what I look for when I’m designing something new.....1st pic was after 10min....2nd pic was after 30 min....left side of board had more paint on it... Phantom Scroller, 3Dface and Fab4 3 Quote Link to comment Share on other sites More sharing options...
MrsN Posted April 9, 2018 Report Share Posted April 9, 2018 What did you do to get the crackle? It looks nice. Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted April 9, 2018 Author Report Share Posted April 9, 2018 7 minutes ago, MrsN said: What did you do to get the crackle? It looks nice. Wood glue between base coat and top coat....... Quote Link to comment Share on other sites More sharing options...
MTCowpoke22 Posted April 9, 2018 Report Share Posted April 9, 2018 Looks good. I've read about doing that, but never tried it myself. Good to know it actually works! Quote Link to comment Share on other sites More sharing options...
lew Posted April 9, 2018 Report Share Posted April 9, 2018 Great job!! wood looks real distressed.....hard to do!! The crackle medium that you brush on always looks too fake!! Def gonna try the glue! Quote Link to comment Share on other sites More sharing options...
lew Posted April 9, 2018 Report Share Posted April 9, 2018 Did you add the second coat when the glue is still wet??? immed after applying the wood glue?.... Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted April 9, 2018 Author Report Share Posted April 9, 2018 (edited) 15 minutes ago, lew said: Did you add the second coat when the glue is still wet??? immed after applying the wood glue?.... Initially I put too much glue on....ended up scraping some off with putty knife.....wait til it gets “tacky”(not very long).....then put top coat on quickly only going in one direction......if it’s a large project, work in small sections Edited April 9, 2018 by smitty0312 Quote Link to comment Share on other sites More sharing options...
lew Posted April 9, 2018 Report Share Posted April 9, 2018 18 minutes ago, smitty0312 said: Initially I put too much glue on....ended up scraping some off with putty knife.....wait til it gets “tacky”(not very long).....then put top coat on quickly only going in one direction......if it’s a large project, work in small sections Thanks!! Going to try it tonite!!!!! Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted April 9, 2018 Report Share Posted April 9, 2018 Ok so dumb question: Are the breaks actually raised like peeling paint or is it flat and smooth? Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted April 9, 2018 Author Report Share Posted April 9, 2018 42 minutes ago, lew said: Thanks!! Going to try it tonite!!!!! I look forward to seeing it....practice on a piece of scrap wood Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted April 10, 2018 Report Share Posted April 10, 2018 Very nice,Tips& tricks! Quote Link to comment Share on other sites More sharing options...
smitty0312 Posted April 10, 2018 Author Report Share Posted April 10, 2018 7 hours ago, new2woodwrk said: Ok so dumb question: Are the breaks actually raised like peeling paint or is it flat and smooth? Flat still sticking new2woodwrk 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.