new2woodwrk Posted April 10, 2018 Report Share Posted April 10, 2018 You all probably know this already, but it was an enlightening moment for me... First off: I'm in the process of cutting out letters - actually, trying to decide if it's better to cut letters or cut words. So far letters is winning for my needs since I only need 3 or 4 words. After making a dozen or so letters approximately 1/2" in size, I thought to myself "Self, these are going to be one time consuming bear to get the fuzzies off". So, I started to think... Hmm what can I do to speed this up... and "EUREKA"! I yelled! We are avid reloaders ( we reload 12 different calibers) and have a full loading room devoted to it so perhaps, our tumbler could be used to speed this up. I threw a bunch of the letters into our tumbler - which is loaded with Corn husks and set it tumbling for 45 Minutes Sure enough, at the end of the cycle all of the outside "fuzzies" were gone and just a few of the 'A". "P" and 'E"'s had just a small piece left inside which was easily removed! In case you opt to try this yourself remember the tumbler mixture should be dry. The corn cob in my tumbler had no residual wet chemical - it had dried out quite a while ago so nothing stained the letters/wood. For mixtures, you could use: corn cob (the cheapest), walnut shells (more expensive but a really good medium), bits of sand paper, buck shot (if you load your own shot gun shells) as well as marbles and more! Just thought I'd share in case anyone wasn't aware this worked. Thanks for reading OCtoolguy, tomsteve and Lucky2 2 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 10, 2018 Report Share Posted April 10, 2018 And to think I sold my tumbler last year. SCROLLSAW703 and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted April 10, 2018 Author Report Share Posted April 10, 2018 1 minute ago, Rockytime said: And to think I sold my tumbler last year. HF has them really cheap at the moment OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted April 10, 2018 Report Share Posted April 10, 2018 My tumbler was not a vibrator. It was a "Thumbler" with ceramic and stainless media. Sold it because I was out of bench space. Kinda miss it. new2woodwrk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted April 10, 2018 Report Share Posted April 10, 2018 I wonder if my husband would notice...... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Sparkey Posted April 10, 2018 Report Share Posted April 10, 2018 Great idea jes. I am also a reloader. I wonder if the car polish in my media will affect the wood? new2woodwrk and OCtoolguy 2 Quote Link to comment Share on other sites More sharing options...
new2woodwrk Posted April 10, 2018 Author Report Share Posted April 10, 2018 (edited) 4 minutes ago, Sparkey said: Great idea jes. I am also a reloader. I wonder if the car polish in my media will affect the wood? From what I've discovered Rusty, yes it will affect the wood - it will seep into the pores and may inhibit staining or finishing. I've not tried it with any of my cleaning fluids so I don't know this first hand, but it makes sense. Also, you may want it to affect the finish with the polish though - food for thought Edited April 10, 2018 by new2woodwrk OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted April 11, 2018 Report Share Posted April 11, 2018 3 hours ago, Roberta Moreton said: I wonder if my husband would notice...... Charlie used a tumbler to get the fuzzies off his segmented bowl pieces before glue up. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Roberta Moreton Posted April 11, 2018 Report Share Posted April 11, 2018 (edited) I remember that! Thanks! Chuck just told me he has a spare! He’s a good guy. Edited April 11, 2018 by Roberta Moreton OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.