GrampaJim Posted May 14, 2018 Report Share Posted May 14, 2018 My first SS was a new Craftsman about 4 of 5 years ago. It lasted 4 months before it needed warranty work. Then I found a Type 1 Dewalt on CL and after a year or so learned to top feed. I really liked top feeding and it helped doing fretwork like the piece in my avatar. Thought I would never go back. These days I am doing more intarsia and no detailed fretwork and the Dewalt is like me (getting old and tired ). So, I just got a Hegner 18-V for an REALLY good price from a scroller friend. Its older, but seems to have all the options I would want. I scroll from a chair, so the stand had to go. I am just starting to learn to use it so here are some of my initial impressions. The table has a really nice finish! Wish it were bigger!!! The cut is not as aggressive as the Dewalt, but I think that makes it more accurate – at least for me. Because of the lower vibration level, I can turn the speed up and still feel in control. All the cast iron frame parts look impressive. Interesting blade clamps, especially have using the Dewalt. The Quick Clamp is nice, but I am surprised there isn’t an different option for the bottom clamp. Bottom feeding on the Hegner is overall not as bad as I thought it would be. I did it before and can do it again. I knew going in, that fretwork was not Hegner's strong point, so I pushed my other three project aside and started a new one – Steve Good’s eagle. I enlarged it to 15” across and am using 3/4” oak. Thought this would be a good test for the saw (and me) and it is. I still need to set up dust collection for the lower end but so far I am a happy camper! Jim OCtoolguy, bobscroll, SCROLLSAW703 and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted May 14, 2018 Report Share Posted May 14, 2018 It is interesting, but I have a Hegner.... would never part with it unless it was a trade in for a newer Hegner. I find it easier to bottom feed on than my Seyco for some reason. I really don't understand why, the upper arm does not go as high as the Seyco but it is easier for me. And I do intricate fret work all the time on it. Smaller table yes, but I increased the size of mine with a piece of 1/8" masonite easily. Anyway, Congrats on your new to you saw. Oh, and I really have no problem with the lower blade clamp, but I do not scroll to make money nor am I in a hurry. I am just totally comfortable with the Hegner. OCtoolguy and SCROLLSAW703 1 1 Quote Link to comment Share on other sites More sharing options...
Sycamore67 Posted May 14, 2018 Report Share Posted May 14, 2018 I love my Hegner and it is 22 years old and still runs great. There are some who like them and others than do not like them and those who think it needs changes. It is a proven design, very tough machine that runs forever and parts available. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted May 14, 2018 Author Report Share Posted May 14, 2018 I plan on taking a couple of months to get comfortable with it. The big thing for me was I wanted reliability and I think its that and more. The saw is over 25 years old and has no parts replaced - ever - just some upgrades added. As has been said here on another thread, most other saws will be in the landfill and these machines will be still going strong. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
oldhudson Posted May 14, 2018 Report Share Posted May 14, 2018 Reliability is always a top factor when I make an equipment purchase. Congrats on your new saw. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted May 14, 2018 Report Share Posted May 14, 2018 21 hours ago, GrampaJim said: My first SS was a new Craftsman about 4 of 5 years ago. It lasted 4 months before it needed warranty work. Then I found a Type 1 Dewalt on CL and after a year or so learned to top feed. I really liked top feeding and it helped doing fretwork like the piece in my avatar. Thought I would never go back. These days I am doing more intarsia and no detailed fretwork and the Dewalt is like me (getting old and tired ). So, I just got a Hegner 18-V for an REALLY good price from a scroller friend. Its older, but seems to have all the options I would want. I scroll from a chair, so the stand had to go. I am just starting to learn to use it so here are some of my initial impressions. The table has a really nice finish! Wish it were bigger!!! The cut is not as aggressive as the Dewalt, but I think that makes it more accurate – at least for me. Because of the lower vibration level, I can turn the speed up and still feel in control. All the cast iron frame parts look impressive. Interesting blade clamps, especially have using the Dewalt. The Quick Clamp is nice, but I am surprised there isn’t an different option for the bottom clamp. Bottom feeding on the Hegner is overall not as bad as I thought it would be. I did it before and can do it again. I knew going in, that fretwork was not Hegner's strong point, so I pushed my other three project aside and started a new one – Steve Good’s eagle. I enlarged it to 15” across and am using 3/4” oak. Thought this would be a good test for the saw (and me) and it is. I still need to set up dust collection for the lower end but so far I am a happy camper! Jim I use this for my bottom clamp. https://advanced-machinery.myshopify.com/products/blade-clamp-wing-nut OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
stoney Posted May 14, 2018 Report Share Posted May 14, 2018 (edited) I hope you like your Hegner Jim. Yep! Hegner scroll saws are reliable well made machines. That being said I believe anyone that has a interest in buying one should read all the reviews that are posted here. I have made several modifications to mine to make it more user friendly. If I were in the market for a new saw I would give Hawk some consideration. Edited May 14, 2018 by stoney OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rob Posted May 15, 2018 Report Share Posted May 15, 2018 Welcome to the Hegner owners club Jim. Glad you like it, I'm loving mine. Rob OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 15, 2018 Report Share Posted May 15, 2018 Glad to hear of another new Hegner owner. I too am one and still getting used to it. My only complaint at this point is the soft/slow start up. I'm not sure if mine has a problem or not and I have been trying to locate someone near me who has one and tells me that they have no problem with that aspect. I want to compare mine to theirs so I know if I'm chasing something that is normal or if I have a problem saw. I really like everything else about it. It is a very different animal from my Dewalt and I like it too. Like having two women who both satisfy you but in different ways. OH! I know I'm going to get it for that comment. R Dave Monk 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted May 15, 2018 Report Share Posted May 15, 2018 Hummm. I'm wondering, it there are no Hegner owners close, why not make a short video showing you slow/soft start, I be more than happy to do the same with mine. I only have short video capability on my little Power Shot camera, but I'm willing to try. You could compare that way,,, maybe. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 15, 2018 Report Share Posted May 15, 2018 11 minutes ago, Scrappile said: Hummm. I'm wondering, it there are no Hegner owners close, why not make a short video showing you slow/soft start, I be more than happy to do the same with mine. I only have short video capability on my little Power Shot camera, but I'm willing to try. You could compare that way,,, maybe. Thanks Paul, I will give it a try but it is so hard to explain that I may have led folks astray with my description. If, say, I have the speed knob set at 1000 and I stip on the pedal, there is a momentary hesitation before it starts. I know that is supposed to be normal but what I'm concerned about is when it starts it jumps up beyond the 1000 and then settles back to what I think is 1000. It's like it's "searching" for the speed that I want. The higher the speed the more pronounced it is. At the slowest speed, it is not as noticeable. Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted May 15, 2018 Author Report Share Posted May 15, 2018 2 hours ago, stoney said: I hope you like your Hegner Jim. Yep! Hegner scroll saws are reliable well made machines. That being said I believe anyone that has a interest in buying one should read all the reviews that are posted here. I have made several modifications to mine to make it more user friendly. If I were in the market for a new saw I would give Hawk some consideration. I would be interested in the modifications you have made and others probably would too. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 15, 2018 Report Share Posted May 15, 2018 My apologies to GrandpaJim. I sure didn't intend to hijack your thread here Jim. I got carried away. Sorry. Ray Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted May 15, 2018 Author Report Share Posted May 15, 2018 Not a problem - the thread is about Hegners. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted May 15, 2018 Report Share Posted May 15, 2018 yes me to. Sorry. And the modifications are pretty neat and look pretty easy. If I ever stop scrolling long enough I plan on doing them. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted May 15, 2018 Report Share Posted May 15, 2018 On 5/13/2018 at 7:26 PM, Scrappile said: It is interesting, but I have a Hegner.... would never part with it unless it was a trade in for a newer Hegner. I find it easier to bottom feed on than my Seyco for some reason. I really don't understand why, the upper arm does not go as high as the Seyco but it is easier for me. And I do intricate fret work all the time on it. Smaller table yes, but I increased the size of mine with a piece of 1/8" masonite easily. Anyway, Congrats on your new to you saw. Oh, and I really have no problem with the lower blade clamp, but I do not scroll to make money nor am I in a hurry. I am just totally comfortable with the Hegner. All one needs to do is have a visit with you at your house and they can testify, as can I, that you turn out some of the nicest scrolling pieces I have ever had the pleasure to see. Even if I do have to feel a little embarrassed about my own work. Dick heppnerguy OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted May 15, 2018 Report Share Posted May 15, 2018 Well thanks Dick, but you don't give yourself enough credit. You do beautiful work, plus you do different varieties, i.e., word art, intarsia, very delicate fretwork, bowls. I am going to try to expand out into some of these other area. But, thank you for you encouragement and kind words... OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted May 15, 2018 Report Share Posted May 15, 2018 You folks are all so talented in your own ways. You give all of us novices something to strive for. Quote Link to comment Share on other sites More sharing options...
stoney Posted May 15, 2018 Report Share Posted May 15, 2018 (edited) 21 hours ago, GrampaJim said: I would be interested in the modifications you have made and others probably would too. Jim I posted My Hegner Modifications here some time ago with pictures but I can't figure out how to provide a link. I am not all that computer literate. Maybe someone can help us out. The search feature doesn't seem to work like it used too or maybe it's just me. LOL Edited May 15, 2018 by stoney OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Rob Posted May 15, 2018 Report Share Posted May 15, 2018 25 minutes ago, stoney said: Jim I posted My Hegner Modifications here some time ago with pictures but I can't figure out how to provide a link. I am not all that computer literate. Maybe someone can help us out. The search feature doesn't seem to work like it used too or maybe it's just me. LOL Hopefully this link works Al. http://www.scrollsawvillage.com/forums/topic/24109-my-hegner-modifications/ Rob OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
stoney Posted May 15, 2018 Report Share Posted May 15, 2018 1 hour ago, Rob said: Hopefully this link works Al. http://www.scrollsawvillage.com/forums/topic/24109-my-hegner-modifications/ Rob Thanks a million Rob. OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted May 15, 2018 Author Report Share Posted May 15, 2018 Thanks Stoney and Rob, these are great! OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
GrampaJim Posted June 16, 2018 Author Report Share Posted June 16, 2018 (edited) Update at one month. Just finished cutting the first intarsia project with the Hegner. Because of the less aggressive blade travel compared to my DeWalt, I find I am more accurate and the fit of the pieces is the best I have ever done. I gotta love that. Table size for me is not an issue like I thought it would be. Breaking more blades than I did on the Dewalt, which I think is to be expected. An it is happening less and less. It almost always happens in the Quick Clamp on top. Any thoughts? Edited June 16, 2018 by GrampaJim OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted June 16, 2018 Report Share Posted June 16, 2018 Jim you know that clamp on the top should not be tight. Per the manual you should be able to wiggle it a little. Do not put the screw that screws done on the top of it tight. Back if off about 1/4 turn. I broke a lot of blades before I read that in the manual. Quote Link to comment Share on other sites More sharing options...
Bfreeman Posted June 16, 2018 Report Share Posted June 16, 2018 Jim When ever I start breaking blades at the top clamp I find that for some reason I got the clamp to tight. It doesn’t take much to hold the blade . Bill Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.