Sambo19 Posted May 26, 2018 Report Share Posted May 26, 2018 I have been cutting between 1 and 3 puzzles at a time and haphazardly drying them above a painters tray on a plastic grid thing I recycled from somewhere. I dip (usually a plastic bag), wait 30 minutes, dip again, wait about 15 minutes, then wipe clean and allow to finish curing, usually flipping once or twice to minimize marks and sticking. I probably need to branch out beyond danish oil one day, but it worked and I am a creature of habit. I am now seeing the value in dipping or finishing more puzzles at one time and am curious how everyone else dries multiple puzzles or projects for efficiency. I have only had a few lines in the finish due to the rack which cleaned up okay, but I would love to do a better job, more efficient job, of handling more projects at once. Any advice or tips would be appreciated. OCtoolguy and SCROLLSAW703 1 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted May 26, 2018 Report Share Posted May 26, 2018 I do not do puzzles but my suggestion would be to stand the pieces on edge after wiped down. No flipping needed and take up less room and can stand on some scrap plywood designed for this. Just keep puzzle grouped together. Sambo19, SCROLLSAW703 and OCtoolguy 1 2 Quote Link to comment Share on other sites More sharing options...
Sambo19 Posted May 26, 2018 Author Report Share Posted May 26, 2018 23 minutes ago, JTTHECLOCKMAN said: I do not do puzzles but my suggestion would be to stand the pieces on edge after wiped down. No flipping needed and take up less room and can stand on some scrap plywood designed for this. Just keep puzzle grouped together. Maybe a sort of rack I can slide several cut pieces of ply onto for drying shelves. Like a small version of a bakers rack? I'll make sure to stand them a bit after the last coat from now on, letting the fret cuts drip first. Just an FYI your gallery link is broken, on my end at least. OCtoolguy and SCROLLSAW703 2 Quote Link to comment Share on other sites More sharing options...
rjweb Posted May 26, 2018 Report Share Posted May 26, 2018 I would ask Scott how he does his puzzles, he makes and sells about 1600 a year, RJ Sambo19 1 Quote Link to comment Share on other sites More sharing options...
JTTHECLOCKMAN Posted May 26, 2018 Report Share Posted May 26, 2018 9 hours ago, Sambo19 said: Maybe a sort of rack I can slide several cut pieces of ply onto for drying shelves. Like a small version of a bakers rack? I'll make sure to stand them a bit after the last coat from now on, letting the fret cuts drip first. Just an FYI your gallery link is broken, on my end at least. That is because it was a gallery that was on the old system and when Travis upgraded he was not able to bring those galleries over with it. I never had the chance to start a new one here. Sorry about that. Sambo19 1 Quote Link to comment Share on other sites More sharing options...
Sambo19 Posted May 26, 2018 Author Report Share Posted May 26, 2018 3 hours ago, rjweb said: I would ask Scott how he does his puzzles, he makes and sells about 1600 a year, RJ That is impressive! I hope Scott weighs in. WayneMahler 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted May 26, 2018 Report Share Posted May 26, 2018 I just dip and stand on edge on newspaper. No muss, no fuss. Sambo19 and SCROLLSAW703 2 Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted May 27, 2018 Report Share Posted May 27, 2018 Actually I think the whole process is on video but not sure what Scott's youtube page is.. also might be on Steve Goods site.. But I believe Scott ade a drying rack out of wood and put chicken wire on it so it could dry on both sides.. He just uses mineral oil for the puzzles.. WayneMahler and Sambo19 1 1 Quote Link to comment Share on other sites More sharing options...
Sambo19 Posted May 27, 2018 Author Report Share Posted May 27, 2018 16 minutes ago, kmmcrafts said: Actually I think the whole process is on video but not sure what Scott's youtube page is.. also might be on Steve Goods site.. But I believe Scott ade a drying rack out of wood and put chicken wire on it so it could dry on both sides.. He just uses mineral oil for the puzzles.. I'm still new around here and don't know who scott is or how to find his web page. Could you post a link? Quote Link to comment Share on other sites More sharing options...
kmmcrafts Posted May 27, 2018 Report Share Posted May 27, 2018 25 minutes ago, Sambo19 said: I'm still new around here and don't know who scott is or how to find his web page. Could you post a link? Here is the youtube video.. At the very beginning you'll see the table and the wire top Sambo19, Joe W. and WayneMahler 2 1 Quote Link to comment Share on other sites More sharing options...
Sambo19 Posted May 27, 2018 Author Report Share Posted May 27, 2018 (edited) 42 minutes ago, kmmcrafts said: Here is the youtube video.. At the very beginning you'll see the table and the wire top That was incredible to watch, very impressive operation thanks for sharing kmmcrafts, amd thanks to Scott for making a great video. Edited May 27, 2018 by Sambo19 Remove video kmmcrafts 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted May 27, 2018 Report Share Posted May 27, 2018 The wire you see on Iggy's racks is called hardware cloth and is available at hardware stores or places like Lowes and Home Depot. My racks are similar but are designed to be carried outside. Weather permitting I find exposure to some sunlight and breezes speed up the drying process. Sambo19 and Jim McDonald 1 1 Quote Link to comment Share on other sites More sharing options...
Sambo19 Posted May 27, 2018 Author Report Share Posted May 27, 2018 5 hours ago, NC Scroller said: The wire you see on Iggy's racks is called hardware cloth and is available at hardware stores or places like Lowes and Home Depot. My racks are similar but are designed to be carried outside. Weather permitting I find exposure to some sunlight and breezes speed up the drying process. Thanks for the information! The sun doesn't hurt your finish? I have tons of wind and no shade, so taking them outside would be very helpful. I'll do a test run. So you ever clean the racks? My small setup is already gunking up. Quote Link to comment Share on other sites More sharing options...
meflick Posted May 27, 2018 Report Share Posted May 27, 2018 (edited) Scott, Iggy, may be out selling somewhere this weekend or he might just be enjoying some family time this holiday weekend. We will tag him though @Iguanadon so he can come in when he returns to the village and give some more info./insight on his processes. He has done several threads here in the Village that outline how he does his puzzles from setup, cutting, to finishing as well as one on his selling setup. If I don't find them quickly to add the links to here, perhaps he can when he returns. Oh, looks like he has been at the Farmer's Market this weekend - see this post in Bragging Rights http://www.scrollsawvillage.com/forums/topic/29538-farmers-market-week-1/?tab=comments#comment-330415 You can find his website, with all of the different puzzles he has that were created by Harvey Bylar for purchase here: https://woodcraftbyscott.com and here is link to his original post on his "assembly line" setup on doing his puzzles. http://www.scrollsawvillage.com/forums/topic/20547-iggys-animal-puzzle-assembly-line/ You can search the village for more of his threads or wait for him to come along and give some more links. Edited May 27, 2018 by meflick Sambo19 1 Quote Link to comment Share on other sites More sharing options...
NC Scroller Posted May 27, 2018 Report Share Posted May 27, 2018 1 hour ago, Sambo19 said: Thanks for the information! The sun doesn't hurt your finish? I have tons of wind and no shade, so taking them outside would be very helpful. I'll do a test run. So you ever clean the racks? My small setup is already gunking up. I set them out for about one hour per side. Since I wipe most of the excess first I do not get any real build up. Sambo19 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.