Popular Post Rockytime Posted July 19, 2018 Popular Post Report Share Posted July 19, 2018 I cut this pattern and used it for a #5 Pegas MG test. I had purchased the Pegas blades when I first started scrolling. I knew nothing about blades so I just picked up some Olsen blades as well as a dozen Pegas blades from Woodcraft. I tried the Pegas and did not like them as I thought they were too aggressive. I did not think I could control them. About two years later I had two blades left and tried them on this pattern. Having scrolled for some time they no longer seemed too aggressive. I found that they did not tend to wander off the pattern line. They worked very well on straight cuts. I'm sold. Last evening I ordered a gross including #'s 3, 5, 7, 9 blades. cutting is yet to receive a finish. meflick, Sam777, frankorona and 7 others 10 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted July 19, 2018 Report Share Posted July 19, 2018 Nicely done Les. Thanks for sharing this with us. DW Quote Link to comment Share on other sites More sharing options...
newfie Posted July 19, 2018 Report Share Posted July 19, 2018 Looks great thanks for sharing Quote Link to comment Share on other sites More sharing options...
rjR Posted July 19, 2018 Report Share Posted July 19, 2018 Very nicely done. Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted July 19, 2018 Report Share Posted July 19, 2018 Nice clean cutting !...well done ! Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted July 20, 2018 Report Share Posted July 20, 2018 Great job! I also like the Pegas blades. Old Joe 1 Quote Link to comment Share on other sites More sharing options...
Montserrat Posted July 20, 2018 Report Share Posted July 20, 2018 Pegas #5 forever, for me great cutting! Quote Link to comment Share on other sites More sharing options...
GPscroller Posted July 20, 2018 Report Share Posted July 20, 2018 Cut the same pattern two weeks ago, such a cute one. Nice Job. Jeff Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 20, 2018 Author Report Share Posted July 20, 2018 5 minutes ago, GPscroller said: Cut the same pattern two weeks ago, such a cute one. Nice Job. Jeff I really liked yours. That's why I found the pattern and cut it. GPscroller 1 Quote Link to comment Share on other sites More sharing options...
rjweb Posted July 20, 2018 Report Share Posted July 20, 2018 Real nice project, good clean cutting, RJ Quote Link to comment Share on other sites More sharing options...
Charlie E Posted July 20, 2018 Report Share Posted July 20, 2018 Great looking work. I haven't tried the Pegas MG blades. I'm so used to cutting at an angle with my FDUR's I imagine it would take me a while to adjust. Quote Link to comment Share on other sites More sharing options...
ekud1946 Posted July 20, 2018 Report Share Posted July 20, 2018 Super Job! Duke Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted July 20, 2018 Report Share Posted July 20, 2018 love it. Roly Quote Link to comment Share on other sites More sharing options...
wombatie Posted July 20, 2018 Report Share Posted July 20, 2018 That is beautiful. You did an excellent job. Marg Quote Link to comment Share on other sites More sharing options...
daveww1 Posted July 20, 2018 Report Share Posted July 20, 2018 very nice job Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted July 21, 2018 Report Share Posted July 21, 2018 On 7/19/2018 at 3:44 PM, Rockytime said: I cut this pattern and used it for a #5 Pegas MG test. I had purchased the Pegas blades when I first started scrolling. I knew nothing about blades so I just picked up some Olsen blades as well as a dozen Pegas blades from Woodcraft. I tried the Pegas and did not like them as I thought they were too aggressive. I did not think I could control them. About two years later I had two blades left and tried them on this pattern. Having scrolled for some time they no longer seemed too aggressive. I found that they did not tend to wander off the pattern line. They worked very well on straight cuts. I'm sold. Last evening I ordered a gross including #'s 3, 5, 7, 9 blades. cutting is yet to receive a finish. Funny, Rocky, I too had the same feeling about the Pegas blades until I used them when I cut my Eiffel Tower a couple of months ago. I also found that I indeed liked them and I also immediately ordered more. Great minds think the same thought Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
rdatelle Posted July 21, 2018 Report Share Posted July 21, 2018 Nice cutting on that angel. Quote Link to comment Share on other sites More sharing options...
Rockytime Posted July 21, 2018 Author Report Share Posted July 21, 2018 18 hours ago, heppnerguy said: <SNIP> Great minds think the same thought Dick heppnerguy I was going to say that but I'm much too modest. Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted July 24, 2018 Report Share Posted July 24, 2018 lovely work! Quote Link to comment Share on other sites More sharing options...
Scrappile Posted July 24, 2018 Report Share Posted July 24, 2018 Beautiful cross, well cut. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.