Popular Post scrollerpete Posted August 3, 2018 Popular Post Report Share Posted August 3, 2018 If you want to practice your turns get this pattern from Steve Good. I used one blade to cut the whole thing #1FDUR I think I should frame this blade. crupiea, frankorona, meflick and 11 others 13 1 Quote Link to comment Share on other sites More sharing options...
rjR Posted August 3, 2018 Report Share Posted August 3, 2018 A very holey ;nicejob! Quote Link to comment Share on other sites More sharing options...
Scrappile Posted August 3, 2018 Report Share Posted August 3, 2018 Great job! Quote Link to comment Share on other sites More sharing options...
rdatelle Posted August 3, 2018 Report Share Posted August 3, 2018 Looks good Pete.Did you have any trouble using a #1 blade. Did you get any wandering with that blade. I seem to have trouble with thinner blades. Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted August 3, 2018 Report Share Posted August 3, 2018 Excellently done Pete. That came out awesomely. Thanks for sharing this with us. DW Quote Link to comment Share on other sites More sharing options...
bobscroll Posted August 3, 2018 Report Share Posted August 3, 2018 What a really nice job on the project Pete and with a single blade too! Well done, Bob Quote Link to comment Share on other sites More sharing options...
Rockytime Posted August 3, 2018 Report Share Posted August 3, 2018 Great dream catcher! How thick is the wood you cut? I'm a bottom feeder and use a #1 penguin silver reverse blade on 1/8 or 1/4 BB. I don't break the blades I just bend them until they are useless. You did terrific! Quote Link to comment Share on other sites More sharing options...
keefie Posted August 3, 2018 Report Share Posted August 3, 2018 nice cutting there, great job Quote Link to comment Share on other sites More sharing options...
Scrolling Steve Posted August 3, 2018 Report Share Posted August 3, 2018 Very nice work ! Quote Link to comment Share on other sites More sharing options...
GPscroller Posted August 4, 2018 Report Share Posted August 4, 2018 Nicely done. Jeff Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted August 4, 2018 Report Share Posted August 4, 2018 A fun pattern. I love the ones that have a lot of fret work to them. I find them so much more enjoyable to cut and the added challenges only makes me want to try more of them. Nice job on a fun pattern. I, personally would have went to a bigger blade to cut this one, like at least a #3. but that is just what I enjoy cutting with as I feel they are easier to stay on line. Nice job on your new project. I love it when I am pushing my own personal envelop. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
wombatie Posted August 4, 2018 Report Share Posted August 4, 2018 You did an excellent job Pete. Well done. Marg Quote Link to comment Share on other sites More sharing options...
John B Posted August 4, 2018 Report Share Posted August 4, 2018 Excellent. Quote Link to comment Share on other sites More sharing options...
daveww1 Posted August 4, 2018 Report Share Posted August 4, 2018 awesome job Quote Link to comment Share on other sites More sharing options...
Dave Monk Posted August 5, 2018 Report Share Posted August 5, 2018 Good job Pete! That would have been good practice for a spiral blade. Quote Link to comment Share on other sites More sharing options...
newfie Posted August 5, 2018 Report Share Posted August 5, 2018 Looks great thanks for sharing Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted August 5, 2018 Author Report Share Posted August 5, 2018 On 8/3/2018 at 1:29 PM, rdatelle said: Looks good Pete.Did you have any trouble using a #1 blade. Did you get any wandering with that blade. I seem to have trouble with thinner blades. No it went very well, make sure your tension is good Quote Link to comment Share on other sites More sharing options...
scrollerpete Posted August 5, 2018 Author Report Share Posted August 5, 2018 (edited) On 8/3/2018 at 2:50 PM, Rockytime said: Great dream catcher! How thick is the wood you cut? I'm a bottom feeder and use a #1 penguin silver reverse blade on 1/8 or 1/4 BB. I don't break the blades I just bend them until they are useless. You did terrific! I used 1/4" ply from Ocooch hardwood supply Edited August 5, 2018 by scrollerpete Quote Link to comment Share on other sites More sharing options...
Charlie E Posted August 5, 2018 Report Share Posted August 5, 2018 Great job on that! Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted August 7, 2018 Report Share Posted August 7, 2018 It's amazing how long a FD blade will cut.I love them.Mighty fine cutting here! Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.