Jump to content
🎄 🎄 🎄 2024 Custom Ornament Business Kit - Now Available - SALE 50% Off Through Dec. 2nd ×
Ornaments For Charity eBook - Designers Wanted! ​​​​​​​🙏 ×

Another couple of Tissue boxes


John B

Recommended Posts

18 minutes ago, rdatelle said:

Those came out great John. Beautiful finish to. I wish I knew how to do corners like that.

 

Thanks Ralph,
I cut the corners on a table saw, you could do them on a router table. I use 1/2" (13mm) material for the boxes so the corners have to cover this. I start by machining timber down to about 3/4" (19=20mm) sqr. Then set the fence on the table saw so that I'm making a cut 5/8 (16mm) along the square and the same depth. What I am actually doing is removing a square strip from with id the 19mm pieces, making them L shaped. I usually machine them in lengths of just  over 16" (400mm). I run the ouside cnr on my router table using a 1/4" roundover bit and sand all smooth. Then cut into 4" (100mm) lengths, enough for one box.

tissue box details.gif

Link to comment
Share on other sites

10 hours ago, wombatie said:

More wonderful boxes.  I love the finish on all of the boxes that you have shown us, apart from lots of sanding what finish do you use?  Do you do any Aussie themed tissue boxes?

Marg

G'day Marg,

Thank you. I use lacquer 30% gloss. I buy it in 20 litre drums, and yes this one has lasted me quite awhile ;) I used to make lots of toys. I sand the boxes 120g, 180g, 240g, and 330g and cut back between coats with 330g.
I have a couple of Aussie designs, Kangaroos, and a few specific to Kalgoorlie and mining eg a Kangaroo and Head frame, and a Dump Truck. When I find them I'll post 'em up.

Link to comment
Share on other sites

15 hours ago, John B said:

G'day Marg,

Thank you. I use lacquer 30% gloss. I buy it in 20 litre drums, and yes this one has lasted me quite awhile ;) I used to make lots of toys. I sand the boxes 120g, 180g, 240g, and 330g and cut back between coats with 330g.
I have a couple of Aussie designs, Kangaroos, and a few specific to Kalgoorlie and mining eg a Kangaroo and Head frame, and a Dump Truck. When I find them I'll post 'em up.

Oh I would love to see the Kalgoorlie and mining ones.

Marg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...