WayneG Posted September 4, 2018 Report Share Posted September 4, 2018 (edited) Made about 24 combs now and I have found the wood I like best. I have tried oak, bulletwood, ipe, cherry and regular maple. Torrified maple is by far the best choice. Edited September 4, 2018 by WayneG Phantom Scroller, Scrappile, jollyred and 4 others 7 Quote Link to comment Share on other sites More sharing options...
amazingkevin Posted September 4, 2018 Report Share Posted September 4, 2018 You are the master of these!.Very nice work! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 4, 2018 Report Share Posted September 4, 2018 Looking good nice wood but looking at the grain won't they snap off easily ? heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
wombatie Posted September 4, 2018 Report Share Posted September 4, 2018 I love the color of the wood. Great work as always Wayne. Marg heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Birchbark Posted September 4, 2018 Report Share Posted September 4, 2018 that maple hasn't been stained, correct? where do you buy torrified wood? Russell heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
loftyhermes Posted September 4, 2018 Report Share Posted September 4, 2018 I had to Google Torrified Maple and it's wood that's baked in a vacuum. heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 4, 2018 Author Report Share Posted September 4, 2018 1 hour ago, Phantom Scroller said: Looking good nice wood but looking at the grain won't they snap off easily ? reccomendtion is to have the grain going in the opposite direction, however depending on the wood it can be strong enough, heck even the first comb I made from oak is still fine. The tines don't snap off easily at all with the correct wood and thickness of the tine. heppnerguy and Phantom Scroller 2 Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 4, 2018 Author Report Share Posted September 4, 2018 42 minutes ago, Birchbark said: that maple hasn't been stained, correct? where do you buy torrified wood? Russell nothing done to the terrified maple except cut and sanded to 2000 grit I buy torrified maple from Lee Valley, they get cut offs from the folks that make the handles for Veritas plaines. When I see they have it in the clearance section I usually bye the lot of them....I don't think you can buy terrified lumber in a retail store. bobscroll 1 Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 4, 2018 Author Report Share Posted September 4, 2018 (edited) 40 minutes ago, loftyhermes said: I had to Google Torrified Maple and it's wood that's baked in a vacuum. that is one way to describe it. what I have learned and how I have learned to explain it is that all the moisture is sucked out of the wood, kind of like a kiln on steroids and then the moisture level is increased to desired level. Torrefied Wood The technology consists of heating the wood at a very high temperature (from 190 C to 240 C), in a torrefaction kiln (autoclave) at controlled atmosphere and low in oxygen. The length of the process, as well as the temperature degree sustained during a determined period, depends on the species and the desired color. This technology requires a pre-drying process using conventional kiln driers, to lower the moisture level between 6% and 10%. After that, the torrefaction kiln lowers the moisture level to 0%. Finally, the wood is placed in a conditioning chamber where the temperature is gradually lowered by controlled steam injection. The moisture level of the product is increased between 3% and 6%, in order to give back to the wood its natural flexibility. This conditioning stabilizes the wood and allows better quality manufacturing. Edited September 4, 2018 by WayneG Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 4, 2018 Author Report Share Posted September 4, 2018 1 hour ago, wombatie said: I love the color of the wood. Great work as always Wayne. Marg thanks, yes the wood is a really nice color and the terrified process makes it smell really nice also. wombatie 1 Quote Link to comment Share on other sites More sharing options...
newfie Posted September 4, 2018 Report Share Posted September 4, 2018 Very nice thanks for sharing Quote Link to comment Share on other sites More sharing options...
daveww1 Posted September 4, 2018 Report Share Posted September 4, 2018 nice job Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 4, 2018 Report Share Posted September 4, 2018 Nice looking comb and thanks for the learning moment. I had never heard of torrified wood before and had to look it up. Interesting. Quote Link to comment Share on other sites More sharing options...
GPscroller Posted September 4, 2018 Report Share Posted September 4, 2018 Neat looking project and thanks for the information. Jeff Quote Link to comment Share on other sites More sharing options...
heppnerguy Posted September 4, 2018 Report Share Posted September 4, 2018 8 hours ago, WayneG said: that is one way to describe it. what I have learned and how I have learned to explain it is that all the moisture is sucked out of the wood, kind of like a kiln on steroids and then the moisture level is increased to desired level. Torrefied Wood The technology consists of heating the wood at a very high temperature (from 190 C to 240 C), in a torrefaction kiln (autoclave) at controlled atmosphere and low in oxygen. The length of the process, as well as the temperature degree sustained during a determined period, depends on the species and the desired color. This technology requires a pre-drying process using conventional kiln driers, to lower the moisture level between 6% and 10%. After that, the torrefaction kiln lowers the moisture level to 0%. Finally, the wood is placed in a conditioning chamber where the temperature is gradually lowered by controlled steam injection. The moisture level of the product is increased between 3% and 6%, in order to give back to the wood its natural flexibility. This conditioning stabilizes the wood and allows better quality manufacturing. Really interesting to hear about a different wood out there that almost no one seems to be aware of. I made a comb for my granddaughter a number of years ago and used a hard wood. It is a comb that women sometimes use to hold their hair in place when they twist it into a kind of knot and the decorative comb holds it and is also displayed as a decorative part of their hair style. Well her hair is heavy and it did break the first time she used it. I thought it was a great design but my wood choice just was not strong enough for the job. I never made another, as a result. I just am not very versed on the many kinds of wood and it's strength. Dick heppnerguy Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 4, 2018 Report Share Posted September 4, 2018 9 hours ago, WayneG said: reccomendtion is to have the grain going in the opposite direction, however depending on the wood it can be strong enough, heck even the first comb I made from oak is still fine. The tines don't snap off easily at all with the correct wood and thickness of the tine. Good stuff live & learn TERRIFIED wood is what I have with my gently hands bobscroll 1 Quote Link to comment Share on other sites More sharing options...
DWSUDEKUM Posted September 4, 2018 Report Share Posted September 4, 2018 Very nicely done. Thanks for sharing this with us. DW Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 5, 2018 Author Report Share Posted September 5, 2018 11 hours ago, heppnerguy said: Really interesting to hear about a different wood out there that almost no one seems to be aware of. I made a comb for my granddaughter a number of years ago and used a hard wood. It is a comb that women sometimes use to hold their hair in place when they twist it into a kind of knot and the decorative comb holds it and is also displayed as a decorative part of their hair style. Well her hair is heavy and it did break the first time she used it. I thought it was a great design but my wood choice just was not strong enough for the job. I never made another, as a result. I just am not very versed on the many kinds of wood and it's strength. Dick heppnerguy I know what you are referring to. I have also made pics as well heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
Rockytime Posted September 5, 2018 Report Share Posted September 5, 2018 Beautiful comb! heppnerguy 1 Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 5, 2018 Author Report Share Posted September 5, 2018 10 hours ago, Rockytime said: Beautiful comb! thanks Rocky! they are really fun to make and great to use! Great satisfaction when someone states that they find themselves combing their hair more often then they should just cause it makes their scalp feel much better bobscroll 1 Quote Link to comment Share on other sites More sharing options...
bobscroll Posted September 5, 2018 Report Share Posted September 5, 2018 It looks great! You did a good job on making the comb Wayne! Bob Quote Link to comment Share on other sites More sharing options...
WayneG Posted September 7, 2018 Author Report Share Posted September 7, 2018 On 9/5/2018 at 7:23 AM, bobscroll said: It looks great! You did a good job on making the comb Wayne! Bob thanks Bob, I am working on a few more combs this time I a using Masaranduba, very hard wood.and nice color. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.