Foxfold Posted September 10, 2018 Report Share Posted September 10, 2018 As you all know I've bought a new to me saw. An Axminster. However, I've read and re-read the instruction book and still cannot even change a blade. Now there was a blade in it when I got it and I don't know how long it had been stood doing nothing, but my guess is at least a year. Are there places that do 'over hauls' on scrollsaws or does anyone know of a nice UK forum that I could join to enable me to get in touch with some kind soul that may be able to come over and help me ? I know this is a long shot but thought I'd ask anyway. Not only am I totally new to scrolling I'm a useless mechanic. OCtoolguy and SCROLLSAW703 1 1 Quote Link to comment Share on other sites More sharing options...
loftyhermes Posted September 10, 2018 Report Share Posted September 10, 2018 Brenda, pages 18, 19 and 20 of the manual https://www.axminster.co.uk/media/downloads/501201_manual.pdf cover blade changing. I've not used your saw so can't offer any more advice than that. UKworkshop is about the best UK forum. https://www.ukworkshop.co.uk/forums/index.php WayneMahler and OCtoolguy 1 1 Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 10, 2018 Author Report Share Posted September 10, 2018 57 minutes ago, loftyhermes said: Brenda, pages 18, 19 and 20 of the manual https://www.axminster.co.uk/media/downloads/501201_manual.pdf cover blade changing. I've not used your saw so can't offer any more advice than that. UKworkshop is about the best UK forum. https://www.ukworkshop.co.uk/forums/index.php I think that it must need an overhaul, because it says -stage 2 = ''remove table insert'' LOL well the flaming thing won't move, everything seems to be stuck solid. I'll chech with the other forum and Axminster maybe. Thanks anyway, xx OCtoolguy 1 Quote Link to comment Share on other sites More sharing options...
Scrappile Posted September 10, 2018 Report Share Posted September 10, 2018 Is that insert metal or plastic? Is the table rusted... Maybe a picture would help some. Spray it withe some lubricant might help loosen it up. Check Youtube, when I have a problem with a piece of equipment I go to Youtube first... OCtoolguy and tomsteve 1 1 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 11, 2018 Report Share Posted September 11, 2018 (edited) Brenda, some table inserts fit pretty tight so they don't move when using the saw. If you can get at it from under the table, give it a small whack with a little hammer. It should just pop out. After looking at the manual that was referred to, I see that you saw is very similar to a Hegner. Edited September 11, 2018 by octoolguy Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 12, 2018 Author Report Share Posted September 12, 2018 (edited) Ok, so I managed to get to my saw finally. Sat and re-read the instructions - 'slowly' - and I've got everything sorted. Did some cutting on it and WOW it is so, so different to my little PinEnd saw. The blades are so tiny compared to the ones I'm used to, but it is amazing. Had to wear my new 'Magnfying Glasses' which took a little getting used to, but I cut a couple of practice pieces out of thin plywood and I was quite happy. Not sure how these tiny things don't snap at the drop of a hat though, but I know you lot cut quite thick wood with them sometimes, but I guess I will learn what I can cut and what I can't over the winter months. I've printed out lots of 'practice' sheets from the Resources tab, so hope with time to be a good scroller. Edited September 12, 2018 by Foxfold SCROLLSAW703, loftyhermes, RabidAlien and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
tomsteve Posted September 12, 2018 Report Share Posted September 12, 2018 good on ya! yer a better mechanic than a lot of mechanics-many just keep tearing off and bangin stuff creating an even more expensive repair without readin how-to's and you took the time to read instructions. ive been scollin since 06 and im still just practicing. thats pretty much all i do with whatever im doing- even walking. i can mess up that even but glad im just practicing. Foxfold and SCROLLSAW703 2 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 12, 2018 Report Share Posted September 12, 2018 I would have helped you but your a fair distance from me Brenda what is the saw an EX or something else?? Roly Quote Link to comment Share on other sites More sharing options...
Foxfold Posted September 12, 2018 Author Report Share Posted September 12, 2018 25 minutes ago, Phantom Scroller said: I would have helped you but your a fair distance from me Brenda what is the saw an EX or something else?? Roly Thanks Roly, I appreciate the thought. It's an Axminster Trade Series AWFS 18. I bought it second hand. But after 'flapping about' like a headless chicken I decided to sit/read/digest. The instruction book is actually well written when you stop and read it. So now I can change a blade, undo the top of the blade and put it through holes in my pattern and it's working well. Just so different to my little 'Clarke' machine. Just got to learn about blades now and I'm up and running OCtoolguy, Phantom Scroller, SCROLLSAW703 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
OCtoolguy Posted September 12, 2018 Report Share Posted September 12, 2018 6 hours ago, tomsteve said: good on ya! yer a better mechanic than a lot of mechanics-many just keep tearing off and bangin stuff creating an even more expensive repair without readin how-to's and you took the time to read instructions. ive been scollin since 06 and im still just practicing. thats pretty much all i do with whatever im doing- even walking. i can mess up that even but glad im just practicing. Just remember, doctors and lawyers all just "practice". bobscroll, SCROLLSAW703 and tomsteve 3 Quote Link to comment Share on other sites More sharing options...
Phantom Scroller Posted September 12, 2018 Report Share Posted September 12, 2018 9 hours ago, Foxfold said: Thanks Roly, I appreciate the thought. It's an Axminster Trade Series AWFS 18. I bought it second hand. But after 'flapping about' like a headless chicken I decided to sit/read/digest. The instruction book is actually well written when you stop and read it. So now I can change a blade, undo the top of the blade and put it through holes in my pattern and it's working well. Just so different to my little 'Clarke' machine. Just got to learn about blades now and I'm up and running Good work flying Dutchman ultra reverse blades are good cleaner cuts not so much sanding 3's 5's and 7's for me I do have some 2's but they snap easy with to much pressure. You'll see which works better for you as you cut more stuff. Roly OCtoolguy, SCROLLSAW703 and Foxfold 2 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.95d348aa76923344a5cab534cc1b3bc1.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.